| 东山公路隧道开挖支护过程数值分析研究 |
| |
| 引用本文： | 高星明. 东山公路隧道开挖支护过程数值分析研究[J]. 交通标准化, 2011, 0(20): 105-109 |
| |
| 作者姓名： | 高星明 |
| |
| 作者单位： | 张家口城市快速路管理处,河北张家口,075000 |
| |
| 摘 要： | 应用有限元分析软件MIDAS/GTS,采用地层结构法分析了东山公路隧道开挖支护过程中的稳定性问题。分析结果表明,开挖不同断面过程中,围岩内最大主应力集中在钢架脚部,钢架架设时应及时施工锁脚锚杆,必要时可采用小导管注浆等方法对拱架脚部围岩进行加固;从衬砌变形角度分析,变形量最大处为拱顶下沉及底脚位置,施工中应注意对拱顶沉降的监测,逐步开挖核心土,保证施工及结构安全,同时应及时施作基础工程,以控制洞室变形;围岩最不利位置出现在拱顶及仰拱两侧,应是重点加强部位。
|
| 关 键 词： | 公路隧道 开挖 支护 数值分析 |
Numerical Analysis of Excavating and Supporting Dongshan Highway Tunnel |
| |
| GAO Xing-ming. Numerical Analysis of Excavating and Supporting Dongshan Highway Tunnel[J]. Communications Standardization, 2011, 0(20): 105-109 |
| |
| Authors: | GAO Xing-ming |
| |
| Affiliation: | GAO Xing-ming(Zhangjiakou Urban Expressway Management Office,Zhangjiakou 075000,China) |
| |
| Abstract: | The stability during excavating and supporting Dongshan Highway Tunnel is analyzed using layer structure method and finite element software MIDAS/GTS.The result shows: during excavating various section,the maximum principal stress concentrates in the feet of steel frame,the locking-feet anchor should be constructed in time when steel frame is erected,the wall rock at the feet of arch could be reinforced through slip casting by ductules when necessary;the maximum distortion of lining is at the sinkage of vau... |
| |
| Keywords: | highway tunnel excavate timbering numerical analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
