首页 | 本学科首页   官方微博 | 高级检索  
     检索      

按桩顶沉降控制的嵌岩桩嵌岩深度计算方法
引用本文:雷勇,赵明华,马缤辉.按桩顶沉降控制的嵌岩桩嵌岩深度计算方法[J].公路交通科技,2011,28(5):86-91.
作者姓名:雷勇  赵明华  马缤辉
作者单位:湖南大学岩土工程研究所;
基金项目:国家自然科学基金项目(50378036)
摘    要:深入探讨了嵌岩桩的荷载传递机理,针对目前规范采用的嵌岩桩嵌岩深度计算方法的不足,根据嵌岩桩承载机理建立荷载传递方程,提出按基桩竖向荷栽传递特性确定嵌岩桩嵌岩深度的计算方法,并得到桩端荷载分担比与嵌岩深度的表达式.通过算例深入研究了嵌岩深度及桩端荷载分担比随桩顶沉降变化规律.结果表明,同等条件下桩顶沉降要求越小,所需嵌岩...

关 键 词:桥梁工程  嵌岩桩  荷载传递机理  桩端荷载分担比  嵌岩深度

Calculation Method of Socketed Length of Rock Socketed Pile Based on Requirement of Pile Top Settlement
LEI Yong,ZHAO Minghua,MA Binhui.Calculation Method of Socketed Length of Rock Socketed Pile Based on Requirement of Pile Top Settlement[J].Journal of Highway and Transportation Research and Development,2011,28(5):86-91.
Authors:LEI Yong  ZHAO Minghua  MA Binhui
Institution:LEI Yong,ZHAO Minghua,MA Binhui(Geotechnical Engineering Institute,Hunan University,Changsha Hunan 410082,China)
Abstract:Loading transfer mechanism of rock-socketed pile was deeply discussed.In view of the existing deficiency of the calculation method used in current standard for socketed length of rock-socketed pile,the load transfer equation was established according to the bearing mechanism of rock-socketed pile,the calculation method of the socketed length of rock-socketed pile was obtained based on the vertical load transfer characteristics of pile,and the expressions of pile tip load-sharing ratio and rock-socketed leng...
Keywords:bridge engineering  rock-socketed pile  load transfer mechanism  pile tip load-sharing  socketed length  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号