| 非圆齿轮在正弦机构中的应用及仿真分析 |
| |
| 引用本文： | 沈威,刘红俊,陈定方,吕学昭,崔建勋.非圆齿轮在正弦机构中的应用及仿真分析[J].武汉理工大学学报(交通科学与工程版),2014(3):684-687. |
| |
| 作者姓名： | 沈威 刘红俊 陈定方 吕学昭 崔建勋 |
| |
| 作者单位： | 武汉理工大学物流工程学院,武汉430063 |
| |
| 摘 要： | 为了满足正弦机构特殊的运动输出曲线,在其输入端设计一对啮合的非圆齿轮.根据非圆齿轮齿轮节曲线方程和插齿加工原理确定其齿廓方程,利用数值算法和Solidworks建模得到非圆齿轮的三维模型,导入ADAMS后通过ADAMS软件进行运动学仿真,仿真结果表明非圆齿轮传动使正弦机构达到特殊的运动输出.
|
| 关 键 词： | 非圆齿轮 正弦机构 仿真 |
Simulation and Analysis of Combing Non-circular Gear with Sine Generator |
| |
| SHEN Wei,LIU Hongjun,CHEN Dingfang,LV Xuezhao,CUI Jianxun.Simulation and Analysis of Combing Non-circular Gear with Sine Generator[J].journal of wuhan university of technology(transportation science&engineering),2014(3):684-687. |
| |
| Authors: | SHEN Wei LIU Hongjun CHEN Dingfang LV Xuezhao CUI Jianxun |
| |
| Institution: | (School of Logistics Engineering ,Wuhan University of Technology ,Wuhan 430063, China) |
| |
| Abstract: | A couple of non--circular gear are designed in the input part of sine mechanism to meet the special output motion.Based on the equation of non-circular gear pitch curve and principle of pinion cutter,tooth profile is determined,and by using numerical algorithem and Solidworks modeling,threedimensional model of non-circular gear is designed.The dynamic simulation of the model in ADAMS prove that non-circualr gear can make the output motion of sine mechanism get special result. |
| |
| Keywords: | non-circular sine mechanism simulation |
| 本文献已被 维普 等数据库收录！ |
|
