| 船舶柴油机活塞环断裂原因分析 |
| |
| 引用本文： | 王艳琼,杨世柏.船舶柴油机活塞环断裂原因分析[J].船海工程,2006,35(6):47-50. |
| |
| 作者姓名： | 王艳琼 杨世柏 |
| |
| 作者单位： | 1. 武汉理工大学能源与动力工程学院,武汉,430063
2. 武汉理工大学材料科学与工程学院,武汉,430063 |
| |
| 摘 要： | 检测某轮中速大功率柴油主机失效活塞环的基体材料及腐蚀产物的成分,用扫描电镜观察活塞环的显微组织和裂纹形态。分析认为,活塞环显微组织中,片状石墨分布不均匀,尺寸相差大,磷共晶未呈网状分布,降低了活塞环的耐磨性和耐蚀性,是该活塞环失效的重要原因,而燃烧产物中钒和硫的氧化物对活塞环表面的腐蚀,则是导致该活塞环产生裂纹并最终断裂的主要原因。
|
| 关 键 词： | 失效 活塞环 高温 腐蚀 |
| 文章编号： | 1671-7953（2006）06-0047-04 |
| 收稿时间： | 2006-07-26 |
| 修稿时间： | 2006-07-262006-08-26 |
Failure analysis on crack in the piston ring of marine diesel engine |
| |
| Authors: | WANG Yan-qiong YANG Shi-bo |
| |
| Institution: | WANG Yan-qiong~1 YANG Shi-bo~21.School of Energy and Power Engineering Wuhan University of Technology Wuhan 4300632.College of Materials Science and Engineering Wuhan University of Technology Wuhan 430063 |
| |
| Abstract: | The microstructure and crack forms of the piston ring of the diesel engine were observed,and the chemical compositions of the piston ring material and corrosive matter in the cracks were examined.It is pointed out that it is an important reason that graphite distributed non-uniformly in microstructure of ring,its size made a great difference and phosphor exist not in net form,so that lost corrosion strength and wearability.Corrosion action of S and V oxidation on the piston ring surface was main reason that resulted in crack in piston ring. |
| |
| Keywords: | failure high temperature piston ring corrosion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
