Influential factors for HLA pump up in a roller finger follower engine |
| |
Authors: | M. Choi K. Min |
| |
Affiliation: | (1) Department of Mechanical Engineering, 2026 W. E. Lay Automotive Laboratory, University of Michigan, 1231 Beal Ave., Ann Arbor, MI 48109-2133, USA |
| |
Abstract: | In an HLA (hydraulic lash adjuster) piston engine, “pump up” can occur when a valve is opened by the HLA when it should be closed. HLA pump up is more frequently encountered with exhaust valves than with intake valves. When HLA pump up in occurs in the exhaust valve, exhaust gas from the exhaust manifold enters the cylinder on the intake stroke, and fresh air-fuel mixture exits through the exhaust manifold on the compression stroke and is burned in the catalyst, causing partial burning, misfire, catalyst melting and power drop. HLA pump up occurs when the force on the valve from the HLA is higher than the force on the HLA from the valve. HLA pump up is related to design parameters, such as oil pressure, rocker ratio, spring load, spring surge, and both intake and exhaust valve timing. In this study, valve lift and load on a roller finger follower were measured at varying engine firing conditions to evaluate HLA pump up. The results indicated that effective measures to reduce HLA pump up include a higher rocker ratio, a lower oil supply pressure to the HLA, a higher spring installation load and a lower spring surge. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|