| 水泥稳定级配碎石混合料成型方式研究 |
| |
| 引用本文： | 何爱军,张泽文,张曦,焦扬.水泥稳定级配碎石混合料成型方式研究[J].城市道桥与防洪,2009(8):188-191. |
| |
| 作者姓名： | 何爱军 张泽文 张曦 焦扬 |
| |
| 作者单位： | 1. 湖北交通工程检测中心,湖北武汉,430051
2. 随岳中高速公路建设指挥部,湖北随州,441300 |
| |
| 摘 要： | 该文根据水泥稳定碎石基层静压成型法和振动成型法两种成型方式,采用设计规范提出的水泥稳定碎石骨架密实型级配成型试件,分析不同成型方式下的最大干密度和最大含水量以及无侧限抗压强度的关系,探讨了两种不同成型方法对压实效果的影响。
|
| 关 键 词： | 水泥稳定级配碎石混合料 成型方式 静压成型 振动成型 骨架密实型 压实 |
Study on Compaction Molding Method of Cement Stabilized Graded Broken Stone Mixture |
| |
| He Aijun,Zhang Zewen,Zhang Xi,Jiao Yang.Study on Compaction Molding Method of Cement Stabilized Graded Broken Stone Mixture[J].Urban Roads Bridges & Flood Control,2009(8):188-191. |
| |
| Authors: | He Aijun Zhang Zewen Zhang Xi Jiao Yang |
| |
| Abstract: | According to two compaction molding methods of the cement stabilized broken stone gravel base hydrostatic molding and vibration molding, using the test piece of cement stabilized broken stone skeleton dense graded molding put forward in the design standard, the article analyzes the relationship among the maximum dry density and the maximum moisture content as well as the unconfined compressive strength by the different molding methods, and discusses the effect of two different methods on the compaction resu... |
| |
| Keywords: | cement stabilized graded broken stone mixture molding method hydrostatic molding vibration molding skeleton compaction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
