首页 | 本学科首页   官方微博 | 高级检索  
     

IC封装导电银胶用片状银粉的研制
引用本文:彭戴,汤俊祥,游立,阮润李,许明超,邢滔. IC封装导电银胶用片状银粉的研制[J]. 船电技术, 2021, 41(3): 14-17. DOI: 10.3969/j.issn.1003-4862.2021.03.004
作者姓名:彭戴  汤俊祥  游立  阮润李  许明超  邢滔
作者单位:武汉船用电力推进装置研究所,武汉430064;武汉船用电力推进装置研究所,武汉430064;武汉船用电力推进装置研究所,武汉430064;武汉船用电力推进装置研究所,武汉430064;武汉船用电力推进装置研究所,武汉430064;武汉船用电力推进装置研究所,武汉430064
基金项目:2020年黄冈市市本级科技计划重点项目I类
摘    要:先通过液相化学还原法制备原始银粉,再利用机械球磨法制得片状银粉,对银粉的形貌、粒度分布、粉体密度、比表面积、水分灰分进行表征,研究原始粉制备工艺、球磨工艺对片状银粉形貌尺寸、粒度分布及密度的影响。结果表明,以分散性好及平均粒径约3μm的球形银粉为原始银粉、无水乙醇为介质,2 mm尺寸规格的氧化锆球为磨球,球磨时间为35 h,机械球磨法制得片状化程度高、粒径均匀、平均粒径小于7μm的片状银粉。将片状银粉用环氧树脂体系配制成IC封装导电银胶,测试导电胶固化前的物性参数、固化片的特性、固化粘接特性及环境测试,并常温下观察是否分层,均达到了应用指标要求。

关 键 词:原始银粉  片状银粉  导电银胶  应用指标

Preparation of Flake Silver Powder for IC Package Conductive Silver Adhesive
Peng Dai,Tang Junxiang,You Li,Ruan Runli,Xu Mingchao,Xing Tao. Preparation of Flake Silver Powder for IC Package Conductive Silver Adhesive[J]. Marine Electric & Electronic Technology, 2021, 41(3): 14-17. DOI: 10.3969/j.issn.1003-4862.2021.03.004
Authors:Peng Dai  Tang Junxiang  You Li  Ruan Runli  Xu Mingchao  Xing Tao
Affiliation:(Wuhan Institute of Marine Electric Propulsion,Wuhan 430064,China)
Abstract:A combined preparing method of flack silver powder is introduced,in which the original silver powder is prepared by chemical reduction in liquid phase,and then flake silver powder by mechanical ball-milling.The morphology,particle size distribution,powder density,specific surface area,moisture and ash content of the silver powder are characterized.The effects of original powder preparation technology and ball-milling process on morphology,size distribution and density of flake silver powder are studied.The results show that the flake silver powder with high degree of flake,uniform particle size and average particle size less than 7μm can be obtained by mechanical ball-milling with spherical silver powder with good dispersion and average particle size of about 3μm as the original silver powder,anhydrous ethanol as the medium and zirconia ball with the size of 2 mm as the grinding ball for 35 h ball milling.For the conductive silver adhesive for IC packaging prepared from flake silver powder with epoxy resin system,the physical parameters,curing and bonding properties of the conductive adhesive before curing,curing and bonding properties,and environmental testing,and the stratification observing at room temperature are introduced in detail,which show that all of them meet the application requirements.
Keywords:original silver powder  flake silver powder  conductive silver adhesive  application index
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号