| 材料和工艺对齿轮接触疲劳性能的影响 |
| |
| 引用本文： | 李贞子. 材料和工艺对齿轮接触疲劳性能的影响[J]. 汽车工艺与材料, 2006, 0(2): 12-14 |
| |
| 作者姓名： | 李贞子 |
| |
| 作者单位： | 中国第一汽车集团公司,技术中心,吉林,长春,130011 |
| |
| 摘 要： | 通过模拟实际齿轮材料、工艺及服役条件,用圆环形辊子试样在接触疲劳试验机上进行齿轮接触疲劳试验,研究了不同材料、工艺对齿轮接触疲劳性能的影响,得到了不同材料、工艺条件下的齿轮接触疲劳强度极限。试验结果表明,渗碳处理试样接触疲劳性能优于调质氮化的试样。
|
| 关 键 词： | 齿轮 材料 工艺 性能 |
| 文章编号： | 1003-8817(2006)02-0012-03 |
| 收稿时间： | 2005-09-22 |
| 修稿时间： | 2005-09-22 |
Influence of Materials and Technology on Gear Contact Fatigue Property |
| |
| LI Zhen-zi. Influence of Materials and Technology on Gear Contact Fatigue Property[J]. Automobile Technology & Material, 2006, 0(2): 12-14 |
| |
| Authors: | LI Zhen-zi |
| |
| Abstract: | Gear contact fatigue test was performed on the contact fatigue tester by the roller samples to simulate actual gear materials,process and service condition.The effects of materials and process on the gear fatigue property were studied and the gear contact fatigue limits under the conditions of various materials and processes were obtained.Results showed that contact fatigue property of carburized gear samples was better than that of nitrided gear samples. |
| |
| Keywords: | gear materials technology property |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
