| 推力轴承结构形式对水下航行体振动与声辐射特性影响研究 |
| |
| 引用本文： | 李飘,陈美霞,黄惜春.推力轴承结构形式对水下航行体振动与声辐射特性影响研究[J].船海工程,2011,40(6):64-68. |
| |
| 作者姓名： | 李飘 陈美霞 黄惜春 |
| |
| 作者单位： | 1. 华中科技大学船舶与海洋工程学院,武汉,430074
2. 中国舰船研究设计中心,武汉,430064 |
| |
| 摘 要： | 针对带推力轴承结构的水下航行体,采用有限元与边界元耦合方法,建立水下航行体整艇流固耦合有限元模型以及水中边界元模型,利用ANSYS刚性域功能建立全舱壁式和半舱壁式两种推力轴承结构形式,计算他们所引起的整艇振动与声辐射特性,并且比较分析他们之间的差异.研究表明,全舱壁式推力轴承结构相比半舱壁式推力轴承结构有一定减振降噪效果.
|
| 关 键 词： | 流固耦合 FEM/BEM 刚性域 推力轴承 振动与声辐射 |
Research on Influence of the Structure Form of Thrust Bearing on Vibration and Sound Radiation of Underwater Vehicle |
| |
| Authors: | LI Piao CHEN Mei-xia HUANG Xi-chun |
| |
| Institution: | 1 College of Naval Architecture and Ocean Engineering,Huazhong University of Science and Technology,Wuhan 430074,China; 2 China Ship Design and Research Center,Wuhan 430064,China) |
| |
| Abstract: | Both fluid structure interaction(FSI) based FEM model and BEM model of underwater vehicle were built up based on the FEM/BEM coupled method.The rigid region function in Ansys was used to model two kinds of thrust bearings,the full bulkhead type and half bulkhead type,by which the vibration and sound radiation caused was calculated,and the difference was compared and analyzed.The research showed that the full bulkhead type has certain effect on vibration and noise reduction compared with the half bulkhead type. |
| |
| Keywords: | FSI FEM/BEM rigid region thrust bearing vibration and sound radiation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
