| 基于非结构化网格的汽车除霜风道数值模拟 |
| |
| 引用本文： | 张群峰,刘伟秀,马铁利,张泉. 基于非结构化网格的汽车除霜风道数值模拟[J]. 汽车技术, 2009, 0(7) |
| |
| 作者姓名： | 张群峰 刘伟秀 马铁利 张泉 |
| |
| 作者单位： | 1. 北京交通大学
2. 北京汽车研究总院有限公司 |
| |
| 摘 要： | 利用基于非结构化网格的有限体积法对某一汽车风道进行了数值模拟,根据模拟结果对原型风道进行几何优化及计算.计算结果表明,优化后的风道各出口流量分配合理,压力损失明显降低,前挡风玻璃上的气流速度大小分布合理.利用热球风速仪测量了安装改型风道的样车前挡风玻璃上的气流速度.测量结果表明,与原型风道相比,改型风道样车前挡风玻璃上的气流速度明显增大,且分布更为均匀.
|
| 关 键 词： | 除霜风道 非结构化网格 有限体积法 压力损失 |
Numerical Simulation of Automobile Defrosting Duct Based on Unstructured Mesh |
| |
| Zhang qunfeng,Liu weixiu,Ma Tieli,Zhang quan. Numerical Simulation of Automobile Defrosting Duct Based on Unstructured Mesh[J]. Automobile Technology, 2009, 0(7) |
| |
| Authors: | Zhang qunfeng Liu weixiu Ma Tieli Zhang quan |
| |
| Abstract: | A certain automobile defrosting duct was simulated by finite volume method(FVM)based on unstructured mesh,the defrosting duct was also optimized and calculated based on the results of simulation,it is shown that the flux distribution of every outlet for optimized duct is reasonable,the pressure loss is reduced obviously and the flow velocity and distribution on the front windshield is also reasonable.The flow velocity near the front windshield was measured with hotbulb probe and the results show that the flow velocity near the front windshield increased obviously for the modified duct,and the distribution was more even. |
| |
| Keywords: | Defrosting duct Unstructured mesh Finite volume method Pressure loss |
| 本文献已被 万方数据 等数据库收录！ |
|
