首页 | 本学科首页   官方微博 | 高级检索  
     

基于高低的高速铁路简支梁徐变上拱识别方法
引用本文:高亮,马帅,刘秀波. 基于高低的高速铁路简支梁徐变上拱识别方法[J]. 铁道工程学报, 2020, 0(1): 25-30,100
作者姓名:高亮  马帅  刘秀波
作者单位:北京交通大学;中国铁道科学研究院集团有限公司
基金项目:国家重点研发计划课题(2016YFB1200402);京沪高速铁路股份有限公司科研计划课题(京沪科研-2016-10)。
摘    要:研究目的:现有监测手段难以高效经济地测量高速铁路全线简支梁的徐变上拱量,但可以通过分析轨道动态检测数据实现有效识别。因此,本文选取我国某高速铁路长达7年的检测数据,结合小波分解、极值点搜寻和概率分布拟合,对每一跨简支梁的高低波形进行识别,然后通过波形关键点识别简支梁徐变上拱量,并研究其发展规律。研究结论:(1)波形识别算法对24 m梁和32 m梁的识别准确率分别为94.3%和96.4%;(2)简支梁徐变上拱与混凝土徐变的发展规律相近,利用最小二乘法拟合得到了上拱量发展曲线;(3)在线路开通运营6年后,24 m梁上拱量的中位数在1.5~2.0 mm之间,32 m梁上拱量的中位数在2.0~2.6 mm之间,简支梁徐变上拱的发展趋于平缓,未来的发展空间有限;(4)本研究成果对掌握高铁桥梁变形状态和指导线路养护维修具有参考价值。

关 键 词:高速铁路  简支梁  徐变上拱  高低  识别方法

Creep Camber Recognition Method of Simply Supported Girders in High-speed Railway Based on Longitudinal Level
GAO Liang,MA Shuai,LIU Xiubo. Creep Camber Recognition Method of Simply Supported Girders in High-speed Railway Based on Longitudinal Level[J]. Journal of Railway Engineering Society, 2020, 0(1): 25-30,100
Authors:GAO Liang  MA Shuai  LIU Xiubo
Affiliation:(Beijing Jiaotong University,Beijing 100044,China;China Academy of Railway Sciences Corporation Limited,Beijing 100081,China)
Abstract:Research purposes:The creep camber of simply supported girders in high-speed railway lines is difficult to measure efficiently and economically for existing monitoring means,but it can be effectively recognized by analyzing the track dynamic inspection data.Therefore,this paper selects the inspection data for as long as 7 years of a high-speed railway in China.Combing wavelet decomposition,extreme point searching and probability distribution fitting,the longitudinal level waveform of each simply supported girder is identified,then the creep camber is recognized through key points in the waveform,and the development law is studied.Research conclusions:(1)The accuracy of waveform recognition reaches 94.3%and 96.4%for 24 m girder and 32 m girder respectively.(2)The development law of creep camber is similar to that of concrete creep,and the development curve of creep camber is fitted by the least square method.(3)After 6 years of operation,the median value of 24 m girder creep camber is between 1.5 mm and 2.0 mm,and that of 32 m girder is between 2.0 mm and 2.6 mm.Besides,the development speed of creep camber are slowing down with limited enlargement area in the future.(4)The research result can provide reference for acquiring the deformation state of high-speed railway girders and guiding the maintenance of railway lines.
Keywords:high-speed railway  simply supported girder  creep camber  longitudinal level  recognition method
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号