Accurate INS position solution during GPS outages or degraded GPS

Temporary degraded GPS (DGPS) position loss, in circumstances such as an overhead bridge, can be alleviated by an inertial navigation system (INS) that uses onboard sensors, such as yaw and speed sensors, to determine vehicle position. This paper introduces a post-processing DGPS/INS integration approach based on using the INS solution during DGPS outages or periods of low accuracy DGPS position solutions. In this approach, the INS solution initialization is performed using the DGPS solution before DGPS position solution loss, and measurements from the Inertial Measurement Unit (IMU). The final post-processed INS solution is a weighted average of the INS forward and backward solutions. This work constitutes two parts: the INS initialization methods for different degrees of freedom vehicle positioning models, and the developed weighting model necessary to combine the forward and the backward solutions. The former part is essential in obtaining acceptable INS initial states for both the stand-alone INS or any post-processing or real time INS/GPS integrated system. The latter part is based on the use of the complementary error behaviours of the backward and the forward solutions, and can be used as a survey method with acceptable position solutions accuracies. Applying the forward/backward INS combined solution method on real data shows that the resultant INS solution accuracy is 35 cm or less over a 1000 m road segment. This method is used to survey freeways interchange road segments where 50% of the surveyed distance has no DGPS solution or has a degraded DGPS solution. The average achieved accuracy over the whole freeways interchange is around 40 cm over a 23 km distance.