|
|||||
|
|
| 港口连续卸船机结构有限元分析中的模型旋转技术研究 | |
| 引用本文： | 吴成才,李锋,冷文浩,金建海,周炜. 港口连续卸船机结构有限元分析中的模型旋转技术研究[J]. 船海工程, 2010, 39(1). DOI: 10.3963/j.issn.1671-7953.2010.01.041 |
| 作者姓名： | 吴成才 李锋 冷文浩 金建海 周炜 |
| 作者单位： | 1. 江南大学,信息工程学院,无锡,214122 2. 中国船舶科学研究中心,无锡,214082 3. 江南大学,信息工程学院,无锡,214122;中国船舶科学研究中心,无锡,214082 |
| 基金项目： | “十一五”国家科技支撑计划制造业信息化工程重大项目(2006BAF01A43) |
| 摘 要： | 针对某系列港口连续卸船机,结合MSC.Patran前后处理器和MSC.Acumen平台实现了该系列卸船机有限元分析的前处理,并将模型旋转方法应用于卸船机有限元分析中,借助该方法从基本模型旋转产生各种工况需要的计算模型,设定载荷和工况后进行批处理分析,避免了手工分析大量重复的前处理工作。 |
| 关 键 词： | 卸船机 有限元分析 旋转 二次开发 MSC.Acumen平台 |
On Model Rotation Technology in Structural Finite Element Analysis of Port Continuous Ship Unloader |
|
| WU Cheng-cai,LI Feng,LENG Wen-hao,JIN Jian-hai,ZHOU Wei. On Model Rotation Technology in Structural Finite Element Analysis of Port Continuous Ship Unloader[J]. Ship &Ocean Engineering, 2010, 39(1). DOI: 10.3963/j.issn.1671-7953.2010.01.041 | |
| Authors: | WU Cheng-cai LI Feng LENG Wen-hao JIN Jian-hai ZHOU Wei |
| Affiliation: | WU Cheng-cai1,LI Feng2,LENG Wen-hao2,JIN Jian-hai1,2,ZHOU Wei2(1 School of Information Technology,Southern Yangtze University,Wuxi Jiangsu 214122,China,2 China Ship Scientific Research Center,Wuxi Jiangsu 214082,China) |
| Abstract: | For certain series of port continuous ship unloader,preprocessing of finite element analysis was realized by means of MSC.Patran pre-postprocessor and MSC.Acumen platform,and model rotation method was applied to finite element analysis of the unloader.With the method the computational models for various load cases could be generated from the basic model,and then a great deal of repeat manual analysis for preprocessing could be avoid by batch analysis after loadings,boundary conditions and load cases were se... |
| Keywords: | ship unloader finite element analysis rotation secondary development MSC.Acumen platform |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |