| 材料硬度对C形密封圈密封能力的影响研究 |
| |
| 引用本文： | 吴梵,宋世伟.材料硬度对C形密封圈密封能力的影响研究[J].船舶工程,2010(6):68-71. |
| |
| 作者姓名： | 吴梵 宋世伟 |
| |
| 作者单位： | 海军工程大学,船舶与动力学院,武汉,430033;海军工程大学,船舶与动力学院,武汉,430033 |
| |
| 摘 要： | 根据经验公式选取不同硬度的橡胶材料参数,采用有限元方法利用ABAQUS通用程序对C形密封圈结构进行大间隙工况下密封性能的仿真计算.结果表明C型密封圈在大间隙工况下的密封性能受三个条件的约束.C形密封圈在大间隙工况下合理的材料硬度范围为70~80.
|
| 关 键 词： | C形密封圈 材料硬度 ABAQUS 有限元仿真 |
Study on the Influences of Material Hardness on the Properties of C-shape Seal Ring |
| |
| WU Fan,SONG Shi-wei.Study on the Influences of Material Hardness on the Properties of C-shape Seal Ring[J].Ship Engineering,2010(6):68-71. |
| |
| Authors: | WU Fan SONG Shi-wei |
| |
| Institution: | WU Fan,SONG Shi-wei(College of Naval Architecture , Power,Naval University of Engineering,Wuhan 430033,China) |
| |
| Abstract: | The parameters of rubbers in different hardness was choose according to experiential formula,the finite element analyses of properties of C shape seal ring in large gap case was made in the finite element method using ABAQUS general simulation program,the simulation result shows that C shape seal ring in large gap case constrained by three conditions.The appropriate hardness range for C shape seal ring in large gap case is between 70 and 80. |
| |
| Keywords: | C-shape seal ring material hardness ABAQUS FEA |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
