|
|||||
|
|
| 机械惯量电模拟在变速器试验台中的应用 | |
| 引用本文： | 龚宗洋,王皖君,张为公,李旭.机械惯量电模拟在变速器试验台中的应用[J].舰船电子工程,2011,31(9):145-149. |
| 作者姓名： | 龚宗洋 王皖君 张为公 李旭 |
| 作者单位： | 1. 苏州博泰测控技术有限公司,苏州,215000 2. 东南大学仪器科学与工程学院,南京,210096 3. 东南大学苏州研究院,苏州,215000 |
| 基金项目： | 国家自然基金项目(编号:60704016); 江苏省自然科学基金项目(编号:BK2010239)资助 |
| 摘 要： | 文章研究了机械惯量电模拟的原理和实现方法，首先采用Kalman滤波器来观测电机的轴扭矩，然后根据惯量电模拟的原理来控制电机的电磁转矩，从而使电机系统的动力特性与机械惯量飞轮一致。最后在Matlab／Simulink环境下建立了变速器试验台模型，汽车的等效惯量采用电模拟方式实现，Simpson自动变速器升档加速过程的仿真结果表明，电模拟方式具有与机械模拟一致的动力学特性。 |
| 关 键 词： | 惯量电模拟 变速器 Kalman滤波器 |
Application of Mechanical Inertia Electrical Emulation for Transmission Test Rig |
|
| Gong Zongyang, Wang Wanjun Zhang Weigong, Li Xu,Suzhou ,Suzhou ,Nanjing.Application of Mechanical Inertia Electrical Emulation for Transmission Test Rig[J].Ship Electronic Engineering,2011,31(9):145-149. | |
| Authors: | Gong Zongyang Wang Wanjun Zhang Weigong Li Xu Suzhou Suzhou Nanjing |
| Institution: | Gong Zongyang1),2) Wang Wanjun3) Zhang Weigong2),3) Li Xu3)(Suzhou Brontect Measurement and Control Corporation1),Suzhou 215000)(Suzhou Research Institution,Southeast University2),Suzhou 215000)(School of Instrument Science and Engineering,Southeast University3),Nanjing 210096) |
| Abstract: | Principle and realization of mechanical inertia electrical emulation are researched.Kalman filter is adopted to observe the shaft torque of the motor,and then the electric-magneto torque of the motor is controlled according to the emulation principle,so the dynamics of the motor matches with the mechanical flywheel.The simulation model of transmission test rig was developed using Matlab/Simulink,and inertia electrical emulation replaces the vehicle effective inertia.The simulation results of gear-up process... |
| Keywords: | inertia electric emulation transmission Kalman filter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |