| 基于Plant Simulation的船厂平直车间作业仿真与优化 |
| |
| 引用本文： | 邓啸尘,周宏,杨振,刘建峰,蒋志勇.基于Plant Simulation的船厂平直车间作业仿真与优化[J].船舶工程,2020,42(3):147-151. |
| |
| 作者姓名： | 邓啸尘 周宏 杨振 刘建峰 蒋志勇 |
| |
| 作者单位： | 江苏科技大学 船舶与海洋工程学院,江苏科技大学 船舶与海洋工程学院,上海外高桥造船有限公司,上海外高桥造船有限公司,江苏科技大学 船舶与海洋工程学院 |
| |
| 基金项目： | 工信部高技术船舶专项（工信部装函[2017]614号） |
| |
| 摘 要： | 船体分段的制造在整个船舶生产过程中占据了大量时间,因此,缩短分段制造时间是缩短船舶建造周期、降低建造成本、提高船厂生产效率的关键所在。以船厂平直车间为研究对象、以缩短车间生产平面分段的最大流程时间为目标,使用Plant Simulation对平面分段的生产制造流程进行模拟仿真,并基于仿真结果使用内置遗传算法功能模块对分段生产顺序进行优化处理,以达到缩短最大流程时间的目的,对分段车间的生产排程具有实际意义。
|
| 关 键 词： | 船体分段制造 平直车间 PLANT SIMULATION 模拟仿真 顺序优化 |
| 收稿时间： | 2019/6/26 0:00:00 |
| 修稿时间： | 2020/3/6 0:00:00 |
Simulation and optimization of shipyard straight workshopbased on Plant Simulation software |
| |
| DENG Xiao-chen,Yang Zhen,LIU Jian-feng and Jiang Zhi-yong.Simulation and optimization of shipyard straight workshopbased on Plant Simulation software[J].Ship Engineering,2020,42(3):147-151. |
| |
| Authors: | DENG Xiao-chen Yang Zhen LIU Jian-feng and Jiang Zhi-yong |
| |
| Institution: | School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Technology,Jiangsu,School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Technology,Jiangsu,Shanghai Waigaoqiao Shipbuilding Co,Shanghai Waigaoqiao Shipbuilding Co,School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Technology,Jiangsu |
| |
| Abstract: | For the shipyard straight workshop,building a shop floor model by Plant Simulation. This paper uses Plant Simulation to simulate the ship section manufacturing process.Based on the simulation results, the built-in genetic algorithm function module is used to optimize the manufacturing process, reduce the maximum process time, achieve the goal of balanced production beats. |
| |
| Keywords: | Straight Workshop Plant Simulation Simulation Optimization of Process |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《船舶工程》浏览原始摘要信息 |
| 点击此处可从《船舶工程》下载免费的PDF全文 |
|
