首页 | 本学科首页   官方微博 | 高级检索  
     

旋喷桩在码头升级改造中的应用
引用本文:仝成才,孔令学. 旋喷桩在码头升级改造中的应用[J]. 水运工程, 2019, 0(4): 200-204
作者姓名:仝成才  孔令学
作者单位:中交天津港湾工程设计院有限公司大连分公司,辽宁 大连 116000,大连港口设计研究院有限公司,辽宁 大连 116023
摘    要:针对旋喷桩在边坡稳定中的设计及应用问题,结合某码头升级改造采用旋喷桩加固为例,通过对PLAXIS基于强度折减法和GEO-SLOPE两种计算方法的分析对比,提出采用PLAXIS计算更适用于旋喷桩加固的边坡。根据现场取样试验结果得知,粉质黏土中的旋喷桩体抗压强度平均值可达6 MPa,内摩擦角平均值约30°,黏结力平均值约0.5 MPa,满足设计要求。因此,旋喷桩的设计在码头升级改造中的应用是合理的。

关 键 词:升级改造;旋喷桩;强度折减法;边坡稳定

Application of jet grouting piles in upgrading and renovation of quay
TONG Cheng-cai and KONG Ling-xue. Application of jet grouting piles in upgrading and renovation of quay[J]. Port & Waterway Engineering, 2019, 0(4): 200-204
Authors:TONG Cheng-cai and KONG Ling-xue
Affiliation:Dalian Branch Company of Tianjin Port Engineering Design & Consulting Co.,Ltd.,of CCCC,Dalian 116000,China and Dalian Port Design & Research Institute Co.,Ltd.,Dalian 116023,China
Abstract:For the design and application of the jet grouting pile in stabilizing the slope,combining with the upgrading of a wharf using the jet grouting pile reinforcement,we compare the PLAXIS based on the strength reduction method and the GEO-SLOPE calculation method,and propose the PLAXIS for the slope strengthening by the jet grouting pile,which is more adaptable.According to the results of on-site sampling test,the average compressive strength of the jet grouting pile in silty clay can reach 6 MPa,the average internal friction angle is about 30°,and the average value of the cohesive force is about 0.5 MPa,which meets the design requirements.Therefore,the application of the jet grouting pile in the upgrading of the wharf is reasonable.
Keywords:
点击此处可从《水运工程》浏览原始摘要信息
点击此处可从《水运工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号