| 考虑冲压引起板厚变化的油底壳模态分析 |
| |
| 引用本文： | 王攀,邓兆祥,褚志刚.考虑冲压引起板厚变化的油底壳模态分析[J].汽车工程,2007,29(12):1106-1109. |
| |
| 作者姓名： | 王攀 邓兆祥 褚志刚 |
| |
| 作者单位： | 重庆大学机械传动国家重点实验室,重庆,400030;重庆大学机械传动国家重点实验室,重庆,400030;重庆大学机械传动国家重点实验室,重庆,400030 |
| |
| 基金项目： | 重庆市自然科学基金计划重点项目 |
| |
| 摘 要： | 针对油底壳冲压过程中板厚会发生变化的现象,采用显式有限元法模拟油底壳整个冲压成形过程,获得油底壳板厚变化信息,将板厚信息映射到隐式模型中进行模态分析。通过与不考虑板厚变化模态结果和实验模态对比发现,考虑冲压过程引起的板厚变化分析结果与实验结果相比,其误差在5%以内,比不考虑板厚变化的分析结果各阶固有频率误差平均减小50%左右。
|
| 关 键 词： | 油底壳 模态分析 有限元分析 冲压 |
| 收稿时间： | 2006-09-26 |
| 修稿时间： | 2007-02-05 |
Modal Analysis of Oil Pan with Consideration of Thickness Changes in Stamping |
| |
| Wang Pan,Deng Zhaoxiang,Chu Zhigang.Modal Analysis of Oil Pan with Consideration of Thickness Changes in Stamping[J].Automotive Engineering,2007,29(12):1106-1109. |
| |
| Authors: | Wang Pan Deng Zhaoxiang Chu Zhigang |
| |
| Abstract: | The whole stamping process of oil pan is simulated by explicit finite element analysis with the information of thickness changes obtained,which is then mapped into implicit FE model to conduct modal analysis.The results show that the deviation of natural frequencies obtained by analytic modal analysis with consideration of thickness changes from that by experimental one is only around 5 %,which is 50 % lower than that without consideration of thickness changes. |
| |
| Keywords: | Oil pan Modal analysis FEA Stamping |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
