首页 | 本学科首页   官方微博 | 高级检索  
     检索      

高速铁路接触网动力学响应实验及仿真
引用本文:刘怡,张卫华,黄标.高速铁路接触网动力学响应实验及仿真[J].中国铁道科学,2005,26(2):106-109.
作者姓名:刘怡  张卫华  黄标
作者单位:1. 西南交通大学,峨眉校区,四川,峨眉,614202;西南交通大学,牵引动力国家重点实验室,四川,成都,610031
2. 西南交通大学,牵引动力国家重点实验室,四川,成都,610031
基金项目:教育部博士点基金项目(2000061302),牵引动力国家重点实验室开放课题(TPL0405)
摘    要:对接触网在受电弓/接触网垂向耦合振动过程中的瞬态位移和应力响应进行研究。对某试验接触网进行了动应力测试实验,并与有限元计算结果进行比较,误差在10%以内。利用有限元软件ANSYS建立Re250 0型简单链型悬挂接触网的二维模型,采用模态叠加法进行瞬态仿真分析,得到接触网的位移及应力时间历程。结果说明随着车速提高,接触网振动加剧,动态位移和应力显著增加,对接触网的疲劳和安全可靠性会造成严重影响。

关 键 词:接触网  动力学  试验  仿真
文章编号:1001-4632(2005)02-0106-04
修稿时间:2004年10月22

Experiment and Simulation on Dynamic Response of the Catenary in High-speed Railway
LIU Yi,ZHANG Wei-hua,HUANG Biao.Experiment and Simulation on Dynamic Response of the Catenary in High-speed Railway[J].China Railway Science,2005,26(2):106-109.
Authors:LIU Yi  ZHANG Wei-hua  HUANG Biao
Abstract:The transient displacement and stress response of catenaries during pantograph/catenary vertical coupling vibration were studied. Dynamic stress testing was carried out on an experimental catenary. The results from the tests were compared with finite element results and the deviation was within 10%. A two dimensional Re250-0 simple stitched catenary model was established using the FEM software ANSYS. The transient analysis of this model was obtained using a mode superposition method. The transient displacement and stress of the catenary were then calculated. The results show that as train speed increases, vibration of the catenary becomes more violent and dynamic displacement and stress increase, having a severe effect on catenary fatigue, reliability and safety.
Keywords:Catenary  Dynamics  Test  Simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号