Hybrid Electric Drive for DDG-51 Class Destroyers |
| |
Authors: | TIMOTHY McCOY JIM ZGLICZYNSKI NILES W. JOHANSON FREDERICK A. PUHN THOMAS W. MARTIN |
| |
Affiliation: | BMT Syntek Technologies Inc., 4301 N. Fairfax Dr., Suite 330, Arlington, VA 22203; General Atomics, P.O. Box 85608, San Diego, CA 92186; Electromagnetic Systems Division at General Atomics; Machinery Integration in the Hydrodynamics, Stability &Machinery Integration Division at Naval Sea Systems Command |
| |
Abstract: | The first of the Arleigh Burke class destroyers is nearing its mid-life. This class of ships was designed during the late 1970s through the 1980s to meet the threats that were prevalent at that time. Since entering service in 1991, these ships have shown themselves to be extremely versatile and the class now consists of nearly 60 ships in service. Their combat systems have been continually upgraded and adapted to meet the new threats the United States faces today. However, in order to keep these platforms viable throughout the first half of the 21st century, their operating costs must be reduced. Manpower, maintenance, and fuel are three of the top operating cost drivers. Most surface combatants spend very little of their underway time operating at full speed or even close to that. Over 1/3 of their underway time is spent at 12 knots and under. This is less than half of their maximum speed and only a fraction of the maximum power owing to the cubic speed–power relationship. Although the existing mechanical drive system is reasonably efficient, the main gas turbines are extremely inefficient at these very low power levels. A shaft-mounted auxiliary electric propulsion system (EPS) can take advantage of excess capacity in the ship service generators to reduce the main engine operating hours. Enabling bi-directional power flow from this auxiliary electric drive will provide additional generation capacity for ship service loads at a modest additional cost. It also provides a "cross-connect" capability from one shaft to the other. This paper will explore one prospect for reducing the operating cost of the DDG-51 class of ships by installing an auxiliary EPS that would powered by the ship service electrical plant. This additional system would serve to reduce both underway fuel usage as well as maintenance on the gas turbine main engines by reducing the number of operating hours on each engine. We will examine the technology trade-offs in this ongoing study. |
| |
Keywords: | |
|
|