首页 | 本学科首页   官方微博 | 高级检索  
     检索      

异型粗合成纤维与砂浆基体界面的粘结性能及其微观增强机理
引用本文:李建辉,邓宗才,唐劼,谭潇,李娜,冯淼.异型粗合成纤维与砂浆基体界面的粘结性能及其微观增强机理[J].公路,2005(12):166-170.
作者姓名:李建辉  邓宗才  唐劼  谭潇  李娜  冯淼
作者单位:北京工业大学建筑工程学院,北京市,100022;中咨工程建设监理公司,北京市,100044
基金项目:北京工业大学研究生部资助项目(Ykj-2004-30)
摘    要:通过自行研制的拉拔试验装置,试验研究了异型粗合成纤维与砂浆基体界面的粘结力及其影响因素。试验表明:在M30砂浆中,纤维不同埋置长度的界面粘结强度基本为一常数3.70MPa,在M20、M40砂浆中,界面粘结强度随纤维埋置长度的增大而减少;对于同一纤维埋置长度,随砂浆强度增加,界面粘结强度不是一直在增加,有时在降低;同时,在作者以前提出的异型粗合成纤维拉拔理论模型的基础上,建立了一个与试验结果更吻合的新理论模型,该新模型对异型粗合成纤维与基体界面粘结性能的进一步深入研究具有较高的实用价值和理论意义。

关 键 词:异型粗合成纤维  砂浆  界面粘结强度  拉拔曲线  拉拔理论模型
文章编号:0451-0712(2005)12-0166-04
收稿时间:2005-05-11
修稿时间:2005-05-11

Bond Properties and Micro-Mechanism of Interface Between Special-Shaped Synthetic Macro-Fiber and Mortar Matrix
LI Jian-hui,DENG Zong-cai,TANG Jie,TAN Xiao,LI Na,FENG Miao.Bond Properties and Micro-Mechanism of Interface Between Special-Shaped Synthetic Macro-Fiber and Mortar Matrix[J].Highway,2005(12):166-170.
Authors:LI Jian-hui  DENG Zong-cai  TANG Jie  TAN Xiao  LI Na  FENG Miao
Institution:1. School of Civil Engineering, Beijing University of Technology, Beijing 100022, China; 2. Zhongzi Engineering Construction Project Management Corporation, Beijing 100044, China
Abstract:With new type pull-out experimental equipment,the bonding force and its effect factors between shaped synthetic macro-fiber and mortar is tested in this paper.The results show that the interfacial bond strength of different embedding lengths in M30 mortar almost is a constant 3.70 MPa.However,in M20 or M40 mortar,it decreases with the fiber embedding length increased,when fiber embedding lengths are same,it doesn't increase and even decreases with the increase in strengths of matrix.Meantime,based on amending the old mechanical model for analysis of shaped synthetic macro-fiber,a new mechanical model is first developed;a good agreement is achieved between the prediction and the experiment results,it has good practical and academic values for the research of interfacial bonding between shaped synthetic macro-fiber and matrix.
Keywords:special-shaped synthetic macro-fiber  mortar  interfacial bond strength  pull-out curve  mechanical model for pull-out
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号