Structural design of an outer tie rod for a passenger car

This study proposes a structural design method for an outer tie rod installed in a passenger car. The weight of the outer tie rod is optimized by using the aluminum alloy Al6082M, which is developed as a steel-substitute material, and applying structural optimization techniques. The high strength aluminum with improved mechanical properties was developed to reduce the weight of the outer tie rod. The newly developed aluminum alloy Al6082M is applied as the material of the outer tie rod. The static strength due to inertia force, durability and buckling performances are considered in the structural design of the outer tie rod. At the proto design stage of a new outer tie rod, it is cost-effective to utilize FE (finite element) analysis to predict each of these performances. In addition, the current trend in the structural design of automobile parts is to use optimization techniques to reduce the weights of the parts. First, for an arbitrary base design, the static strength, the life cycle and the buckling load are calculated to check whether the design satisfies its criteria. Then, the critical performance is selected so as to include its loading condition only in the optimization process. In this study, the metamodel based optimization process using kriging is adopted to obtain the minimum weight satisfying the critical design requirement. Then, the feasibility of the determined optimum shape is investigated against the other performances. Finally, the optimum design of outer tie rod is modified by considering forging efficiency. The performances of the final design are investigated through simulation and experiment.