| 桥梁悬臂拼装施工中钢箱梁制造尺寸的确定 |
| |
| 引用本文： | 陈太聪,苏成.桥梁悬臂拼装施工中钢箱梁制造尺寸的确定[J].中国公路学报,2011(4). |
| |
| 作者姓名： | 陈太聪 苏成 |
| |
| 作者单位： | 华南理工大学土木与交通学院;华南理工大学亚热带建筑科学国家重点实验室; |
| |
| 基金项目： | 国家自然科学基金项目(51078150); “十一五”国家科技支撑计划项目(2006BAJ01B07); 亚热带建筑科学国家重点实验室自主研究项目(2008ZC21) |
| |
| 摘 要： | 针对工程计算中确定悬臂拼装施工的钢箱梁段制造尺寸时考虑不够全面的状况,综合考虑结构整体变形和梁段局部变形的影响,根据设计目标和施工要求,提出端截面转角补偿的方法,计算梁段2个端截面处边腹板的制造倾角,进而确定梁段的制造线形和预拼线形,提出了梁段端截面处的顶、底板长度补偿和梁段轴向长度补偿的计算方法,并对广州黄埔大桥斜拉桥进行实际计算分析。研究结果表明:若忽略梁段局部变形,则预拼线形的误差会随着悬臂拼装的进行不断放大,梁段顶、底板处的焊缝质量和焊接收缩变形将难以控制。
|
| 关 键 词： | 桥梁工程 钢箱梁 施工控制 悬臂拼装 无应力尺寸 制造线形 预拼线形 |
Determination of Fabrication Dimensions of Steel Box Girders in Cantilever Erection Construction of Bridge |
| |
| CHEN Tai-cong,SU Cheng.Determination of Fabrication Dimensions of Steel Box Girders in Cantilever Erection Construction of Bridge[J].China Journal of Highway and Transport,2011(4). |
| |
| Authors: | CHEN Tai-cong SU Cheng |
| |
| Institution: | CHEN Tai-cong1,2,SU Cheng1,2(1.School of Civil Engineering and Transportation,South China University of Technology,Guangzhou 510641,Guangdong,China,2.State Key Laboratory of Subtropical Building Science,China) |
| |
| Abstract: | Aimed at current state of lack of complete consideration of determination on the fabrication dimensions of girder segments,according to design aims and construction requirements of steel box girders in full consideration of deformations obtained from global analysis of whole structure and local analysis of individual segments,compensation method of end section corner was proposed to calculate fabrication dip angle of web at two end sections and then it was used to derive the fabrication geometry and pre-ass... |
| |
| Keywords: | bridge engineering steel box girder construction control cantilever erection unstressed dimension fabrication geometry pre-assembled geometry |
| 本文献已被 CNKI 等数据库收录！ |
|
