首页 | 本学科首页   官方微博 | 高级检索  
     

滚流测试装置对汽油机进气道稳流试验的影响
引用本文:张海蓉,张伟,王天友. 滚流测试装置对汽油机进气道稳流试验的影响[J]. 车用发动机, 2015, 0(2): 83-87. DOI: 10.3969/j.issn.1001-2222.2015.02.017
作者姓名:张海蓉  张伟  王天友
作者单位:1. 泛亚汽车技术中心有限公司,上海,201201;2. 天津大学内燃机燃烧学国家重点实验室,天津,300072
摘    要:采用气道稳流试验对缸内滚流进行测试和评价是广为采用并行之有效的方法,但是由于没有统一的标准,滚流测试装置结构的差异对测试结果造成了较大影响,针对此问题,着重研究了不同结构的滚流模拟缸套对稳流试验结果的影响。研究表明:缸头结构对滚流比的影响幅度接近20%;缸套高度每增加一倍缸径,滚流比的衰减幅度约为6%;滚流强度测试结果与出气口直径成反比,当出气口直径接近缸径,为0.857B时,跃升现象不再出现。

关 键 词:进气道  稳流试验  滚流比  模拟缸套  评价方法

Effect of Tumble Test Device on Steady Flow Test of Intake Port for Gasoline Engine
ZHANG Hai-rong,ZHANG Wei,WANG Tian-you. Effect of Tumble Test Device on Steady Flow Test of Intake Port for Gasoline Engine[J]. Vehicle Engine, 2015, 0(2): 83-87. DOI: 10.3969/j.issn.1001-2222.2015.02.017
Authors:ZHANG Hai-rong  ZHANG Wei  WANG Tian-you
Affiliation:ZHANG Hai-rong;ZHANG Wei;WANG Tian-you;Pan Asia Technical Automotive Center Co.,Ltd.;State Key Laboratory of Engines,Tianjin University;
Abstract:The steady flow test of intake port was widely used for the measurement and evaluation of in‐cylinder tumble mo‐tion .However ,the different structures of tumble test device could acquire the different results due to the absence of test legis‐lation .For this kind of problem ,the effect of dummy cylinder on steady flow test results was researched .The results show that the structure of dummy cylinder edge can make the tumble ratio variation increase to 20% and the tumble ratio decreases by about 6% when the dummy cylinder lengthens by each cylinder diameter .Besides ,the tumble ratio is inversely proportional to the outlet diameter and the phenomenon of step rise for tumble intensity disappears when the outlet diameter increases to 0 .857 B .
Keywords:intake port  steady flow test  tumble ratio  dummy cylinder  evaluation method
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号