| 错边对压力管道焊接接头应力集中影响的研究 |
| |
| 引用本文： | 刘明,雷斌隆,徐磊. 错边对压力管道焊接接头应力集中影响的研究[J]. 管道技术与设备, 2008, 0(1): 36-37,40 |
| |
| 作者姓名： | 刘明 雷斌隆 徐磊 |
| |
| 作者单位： | 西南交通大学工程科学研究院,四川成都,610031;西南交通大学工程科学研究院,四川成都,610031;西南交通大学工程科学研究院,四川成都,610031 |
| |
| 摘 要： | 采用有限元软件ANSYS9.0,针对压力管道焊接接头出现的不同位置、不同尺寸条件下的错边缺陷,研究它们对焊接接头应力集中程度的影响,为压力管道的安全评定提供可靠的力学依据。计算结果表明:压力管道焊接接头的应力集中不仅随着错边量的增大而增加,并且同尺寸的错边引起的应力集中,纵缝较环缝更明显。此外,还探讨了降低接头处焊缝金属的坡度,减小此处应力集中的可行性。
|
| 关 键 词： | 焊接缺陷 错边 应力集中 有限元 |
| 文章编号： | 1004-9614（2008）01-0036-02 |
| 收稿时间： | 2007-05-16 |
| 修稿时间： | 2007-08-07 |
Study of Effects of Unfitness Defect on Stress Concentration in Welding Joints of Pressure Piping |
| |
| LIU Ming,LEI Bin-long,XU Lei. Study of Effects of Unfitness Defect on Stress Concentration in Welding Joints of Pressure Piping[J]. Pipeline Technique and Equipment, 2008, 0(1): 36-37,40 |
| |
| Authors: | LIU Ming LEI Bin-long XU Lei |
| |
| Abstract: | It researches the effects of unfitness defects of the welding joints of pressure piping at different places and different sizes on stress concentration by means of the finite element software ANSYS9.0 and supplies reliable mechanical evidences for the safety evaluation of pressure piping.The results indicate,that the stress concentration in welding joints of pressure piping becomes larger with the size of unfitness increasing.In the same conditions,the stress concentration at the unfitness of longitudinal weld is more obvious than that of girth weld.In addition,it is discussed that reducing the stress concentration is feasible when the grade of weld metal in welding joint is decreased. |
| |
| Keywords: | welding defect unfitness stress concentration finite element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
