| 中低速磁浮线连续弯梁设计研究 |
| |
| 引用本文： | 颜志华.中低速磁浮线连续弯梁设计研究[J].城市轨道交通研究,2010,13(4):54-57. |
| |
| 作者姓名： | 颜志华 |
| |
| 作者单位： | 铁道第三勘察设计院集团有限公司,300142,天津 |
| |
| 摘 要： | 依托唐山试验线曲线半径为100m的17.7m+27m+17.7m斜弯连续梁,对中低速磁浮线轨道梁设计进行初步探讨。为了满足车辆限界和轨道安装及承轨台预埋件的要求,连续曲梁截面斜置,构成复杂的空间扭转曲线箱梁。轨道梁桥面与轨道采用承轨台上置式连接方式。为了增加轨道梁的横向稳定性,采取了增大梁宽、加大支座横向间距、设置拉力支座等构造措施。根据连续曲梁的受力特点,建立空间模型进行了计算分析,并参考相关规范,讨论了轨道梁刚度和动力特性的设计要求。
|
| 关 键 词： | 中低速磁浮 连续梁 设计 |
On Continuous Curved Beam Design of Low and Medium Speed Maglev Transportation |
| |
| Yan Zhihua.On Continuous Curved Beam Design of Low and Medium Speed Maglev Transportation[J].Urban Mass Transit,2010,13(4):54-57. |
| |
| Authors: | Yan Zhihua |
| |
| Institution: | Yan Zhihua The 3rd Railway Survey , Design Institute,300142,Tianjin,China |
| |
| Abstract: | The design of low and medium speed maglev transportation track beam is discussed in this paper,with reference to a 17.7 m+27 m+17.7 m span and a 100 m radius continuous curved and inclined beam on Tangshan Test Route.This track beam is a complicated and twisted spatial box beam,its section is declined in order to satisfy the vehicle clearance,the track installation and the reburied member of rail bear.The track and beam face are linked by rail bear on the beam.Some construction measures are used,such as the... |
| |
| Keywords: | low/medium speed Maglev transportation continuous beam design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
