| 爆炸破片侵彻钢/陶瓷/铝复合板的数值计算研究 |
| |
| 引用本文： | 黄燕玲,吴卫国,李晓彬,徐双喜,孔祥韶.爆炸破片侵彻钢/陶瓷/铝复合板的数值计算研究[J].中国舰船研究,2010,5(4):27-31. |
| |
| 作者姓名： | 黄燕玲 吴卫国 李晓彬 徐双喜 孔祥韶 |
| |
| 作者单位： | 1. 武汉理工大学,交通学院,湖北,武汉,430063;高速船舶工程教育部重点实验室,湖北,武汉,430063
2. 武汉理工大学,交通学院,湖北,武汉,430063 |
| |
| 摘 要： | 陶瓷复合装甲具有优良的抗弹性能,合理设置复合靶板各层厚度有利于提高其抗弹性能。文章采用非线性动力学程序AUTODYN,模拟了直径为8mm的圆柱形破片对钢/陶瓷/铝复合靶板的侵彻过程,分析侵彻过程中靶板的破坏机理。通过一系列模拟,分析钢面板厚度、陶瓷层厚度以及铝背板厚度对复合靶板抗侵彻性能的影响,研究表明在面密度一定时,减小面板厚度,增加陶瓷和铝背板厚度对复合靶板的抗弹性能有明显提高。
|
| 关 键 词： | 复合靶板 抗侵彻性能 数值计算 爆炸破片 |
Numerical Calculation of Explosion Fragment Penetrating Compound Target |
| |
| Huang Yan-ling,Wu Wei-guo,Li Xiao-bin,Xu Shuang-xi,Kong Xiong-shao.Numerical Calculation of Explosion Fragment Penetrating Compound Target[J].Chinese Journal of Ship Research,2010,5(4):27-31. |
| |
| Authors: | Huang Yan-ling Wu Wei-guo Li Xiao-bin Xu Shuang-xi Kong Xiong-shao |
| |
| Institution: | Huang Yan-ling1,2 Wu Wei-guo1,2 Li Xiao-bin1 Xu Shuang-xi1 Kong Xiong-shao1 1 School of Transportation,Wuhan University of Technology,Wuhan 430063,China 2 Key Laborarory of High Speed Ship Engineering,the Ministry of Education,Wuhan 430063,China |
| |
| Abstract: | The anti-bullet property of the ceramic composite armor can be improved by properly setting the thickness of each layer in the composite plate.The performance of 8mm diameter cylindrical fragment penetrating the compound target of steel/ceramic/aluminum was simulated by the dynamic nonlinear process AUTODYN,and the failure of compound target in the penetration process was analyzed.Through analyzing the influence of the thickness of front plate,the ceramic tile and rear plate on the anti-penetration properties of the compound target,it was found that when the surface density was constant,reducing the thickness of the front plate or increasing the thickness of the ceramic tile and rear plate could greatly improve the anti-bullet property. |
| |
| Keywords: | compound target anti-penetration numerical calculation explosion fragment |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
