首页 | 本学科首页   官方微博 | 高级检索  
     检索      

高速铁路列车运行辐射噪声测量量和测量点位的选取
引用本文:何财松,李晏良.高速铁路列车运行辐射噪声测量量和测量点位的选取[J].中国铁路,2019(7):86-90.
作者姓名:何财松  李晏良
作者单位:中国铁道科学研究院集团有限公司节能环保劳卫研究所
基金项目:中国铁道科学研究院科技研究开发计划项目(2016YJ114)
摘    要:在研究国内外相关铁路列车运行辐射噪声测量标准的基础上,结合大量的试验数据与现场测试经验分析成果,研究并提出我国高速铁路列车运行辐射噪声关键测量参数测量量和测量点位的选取建议:(1)高速铁路列车运行辐射噪声测量量应选择LAeq,Tp;(2)高速铁路列车运行辐射噪声测试中,以距轨道中心25.0m、距轨面高度3.5m和距轨道中心7.5m、距轨面高度3.5m两个测点作为标准测点。

关 键 词:高速铁路  噪声  测量方法  测量点位  测量量

Selection of Measurement Quantity and Measuremen Point of Train Operation Radiated Noise of High Speed Railway
HE Caisong,LI Yanliang.Selection of Measurement Quantity and Measuremen Point of Train Operation Radiated Noise of High Speed Railway[J].Chinese Railways,2019(7):86-90.
Authors:HE Caisong  LI Yanliang
Institution:(Energy Saving & Environmental Protection & Occupational Safety and Health Research Institute,China Academy of Railway Sciences Corporation Limited,Beijing 100081,China)
Abstract:Based on the study of measurement standards of train operation radiated noise of high speed railway (HSR) at home and abroad and taking mass test data and the analysis results of field test into account, the paper proposes the selecting suggestions about key measurement parameters for train operation radiated noise of HSR in China:(1) Measurement quantity for train operation radiated noise of HSR shall select LAeq,Tp;(2) During the radiated noise test, there shall be two standard measurement points. One is 25.0 m from the track center and 3.5 m above the track surface, and the other is 7.5 m from the track center and 3.5 m above the track surface.
Keywords:high speed railway  noise  measurement method  measurement point  measurement quantity
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号