板材成形回弹的数值仿真方法研究 |
| |
引用本文: | 杨燕琴,赵耀.板材成形回弹的数值仿真方法研究[J].船海工程,2013(5):43-46. |
| |
作者姓名: | 杨燕琴 赵耀 |
| |
作者单位: | 华中科技大学船舶与海洋工程学院,武汉430074 |
| |
摘 要: | 结合板材成形和回弹过程的特点,采用显式-隐式算法模拟板材成形和回弹过程,并对数值模拟中的关键问题进行分析.利用显式-隐式算法,对板材辊弯成形和回弹过程进行模拟,得到整个过程中任一时刻板上的应力分布、板材的回弹量及最终变形状态.
|
关 键 词: | 板材成形 回弹 有限元 |
Numerical Simulation Method of Spring-back in Plate Forming |
| |
Authors: | YANG Yan-qin ZHAO Yao |
| |
Institution: | (School of Naval Architecture and Ocean Engineering, Huazhong University of Science and Technology, Wuhan 430074, China) |
| |
Abstract: | Based on the characteristics of the sheet metal forming and spring-back process, the explicit algorithm was used to simulate the forming process, and the implicit algorithm was used to simulate the spring-back process. The key issues in the numerical simulation were analyzed. With the use of explicit-implicit algorithm, the roll bending for plate was simulated, so as to obtain the stress distribution at any moment in the entire process, the amount of spring-back and the final deformation state of the plate. |
| |
Keywords: | plate forming springback finite element method |
本文献已被 维普 等数据库收录! |
|