| 可变几何排气管增压系统的设计与试验研究 |
| |
| 引用本文： | 王绍明,朱骏,邓康耀,崔毅,邢卫东,张艳丽. 可变几何排气管增压系统的设计与试验研究[J]. 车用发动机, 2011, 0(1): 56-60,64 |
| |
| 作者姓名： | 王绍明 朱骏 邓康耀 崔毅 邢卫东 张艳丽 |
| |
| 作者单位： | 上海交通大学动力机械及工程教育部重点试验室;中国北方发动机研究所; |
| |
| 基金项目： | 柴油机高增压技术国防科技重点实验室基金项目资助(9140C3307080802); 国防预研项目资助(4010103010403) |
| |
| 摘 要： | 针对某车用6缸机高低转速工况兼顾的问题提出了一种可变几何排气管增压系统,并进行了稳态模拟试验,分别用原机脉冲增压系统排气管和新加工的准定压增压系统排气管来模拟可变几何排气管增压系统的可控阀门关和开的状态.试验结果表明:在低速工况关闭可控阀门,可以充分利用脉冲能量;在高速工况打开可控阀门,可以减小泵气损失.
|
| 关 键 词： | 可变几何增压 排气管 涡轮增压 泵气损失 柴油机 |
Design and Experiment for VGEM Turbocharging System |
| |
| WANG Shao-ming,ZHU Jun,DENG Kang-yao,CUI Yi,XING Wei-dong,ZHANG Yan-li. Design and Experiment for VGEM Turbocharging System[J]. Vehicle Engine, 2011, 0(1): 56-60,64 |
| |
| Authors: | WANG Shao-ming ZHU Jun DENG Kang-yao CUI Yi XING Wei-dong ZHANG Yan-li |
| |
| Affiliation: | WANG Shao-ming1,ZHU Jun1,DENG Kang-yao1,CUI Yi1,XING Wei-dong2,ZHANG Yan-li2(1.Education Ministry Key Laboratory for Power Machinery and Engineering,Shanghai Jiaotong University,Shanghai 200030,China,2.China North Engine Research Institute,Datong 037036,China) |
| |
| Abstract: | A variable geometry exhaust manifold(VGEM) system was proposed and its related steady simulation experiments were carried out in order to improve a 6-cylinder vehicle engine performance at both high and low speed.The opening and closing state of controllable valve for VGEM were simulated by the original pulse turbocharging and newly-machined quasi-constant pressure turbocharging exhaust manifold respectively.The results show that closing the controllable valve at low speed can make full use of pulse energy;... |
| |
| Keywords: | variable geometry turbocharging exhaust manifold turbocharging pumping loss diesel engine |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
