首页 | 本学科首页   官方微博 | 高级检索  
     检索      

恒温热源条件下实际回热式布雷顿循环的功率密度特性
引用本文:严华,陈林根,郑军林,孙丰瑞,过增元.恒温热源条件下实际回热式布雷顿循环的功率密度特性[J].船舶工程,2001(5):24-27.
作者姓名:严华  陈林根  郑军林  孙丰瑞  过增元
作者单位:1. 海军驻704所代表室
2. 海军工程大学
3. 清华大学
基金项目:国家重点基础研究发展计划(973计划);G2000026301;
摘    要:用有限时间热力学方法分析恒温热源条件下实际回热式布畦顿循环的功率密度特性,计入工质与高,低温侧换热器的热阻损失,压气机,涡轮机的不可逆压缩和膨胀损失,以及管路系统中的压力损失,导出了功率密度与压比间的解析式,并通过数值计算将对应于最大功率密度时的一些参数与对应于最大功率时的同样参数进行了比较。

关 键 词:有限时间热力学  布雷顿循环  功率密度  恒温热源  涡轮机

Power Density Performance of Real Regenerated Brayton Cycles Coupled to Constant-Temperature Heat Reservoirs
Yan Hua,Chen Lingen and others.Power Density Performance of Real Regenerated Brayton Cycles Coupled to Constant-Temperature Heat Reservoirs[J].Ship Engineering,2001(5):24-27.
Authors:Yan Hua  Chen Lingen and others
Institution:Yan Hua Chen Lingen and others
Abstract:Performance analysis on power density of real regenerated.Brayton cycles coupled to constant temperature heat reservoirs is conducted using finite time thermodynamics in this paper.The analytical formulas about the cor relations between power density and pressure ratio are derived.In the analysis,irreversibilities involve the heat resistance losses in the hot and cold side heat exchangers and regenerator,the irreversible compression and expansion losses in the compressor and turbine,and the pressure losses in the piping.Some parameters of the cycle corresponding to the maximum power density are compared with the same parameters corresponding to the maximum power by numerical examples.
Keywords:Finite  time thermodynamics  Heat regeneration  Brayton cycle  Power density
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《船舶工程》浏览原始摘要信息
点击此处可从《船舶工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号