Modelling car availability,modal split and trip distribution by Monte-Carlo simulation: A short way to integrated models

The model used a Monte-Carlo algorithm to simulate modal split and trip distribution as an interconnected decision process at the individual level. Using census data, the individuals of a planning region are classified into situation groups, which represent significantly different decision situations with respect to socio-demographic position and territorial location. According to the theoretical framework, which emphasises mobility constraints instead of preferences, household structure and sex (time budget and car availability constraints) and work place characteristics (location constraints) are the key variables. For each situation group, decision profiles are empirically determined; these describe car availability, travel time constraints and work place distribution. Modal split and trip distribution are simulated as an interconnected individual decision process, which is stochastically determined by the location of the individual and the decision profile of his situation group.The algorithm is very sensitive and flexible and extremely well suited to electronic processing. An extended and modified version is currently being used in the preparation of regional transporation plans for several German city regions.     

An analysis of trip length and land use patterns in the Greater Athens Area

The research described in this paper is an attempt to quantify the impact of a certain distribution of land uses upon trip characteristics — notably trip lengths. The idea is to relate trip lengths classified by mode and purpose to the distance of one trip end from the conurbation centre. The latter is defined as the point which represents a reasonable estimate of the place where the economic, administrative, and cultural life of the urban area is centered.By relating trip lengths to the distance of one trip end from the centre, one could obtain a relation which in effect would be a quantitative expression of the relation between transport and land use. The first application of this idea was in London using the 1966 journey to work data, and it gave quite satisfactory results.The area examined in this research is the Greater Athens Area. The method of analysis is similar to that followed in London so the results of the two studies can be compared. Only work trips are considered for four modes: car, bus, train and all modes (total). It is found that in the case of Athens too, when distance of the workplace from the centre is considered, trip lengths change in smoothly varying ways and a series of mathematical curves can be fitted to the data with an acceptable degree of accuracy. These curves are of the Gamma family having a constant spread factor and varying scale factors for each mode considered. When the distance of the residence end of the trip from the centre is considered, the trip length distributions are not very smooth, a clear mathematical curve cannot be fitted, but again a considerable degree of order can be detected. In addition to the above results a discussion is given on their meaning and the possibilities for future research. In fact the results so far are considered to be the first stage of a more extended research programme which will eventually connect trip length distributions to income and other economic or social parameters in an urban area.The author wishes to express his thanks and appreciation for the comments and constructive criticism made on the various drafts of this paper by M.J.M.     

Modelling behavioural rules for daily activity scheduling using fuzzy logic

The paper focuses on how trip time variability affects re-scheduling of daily activities. A delay in a trip or an early arrival can contribute to changes in the timing, location of the next activity, and to the deletion/addition of some activities. We propose the idea of using fuzzy logic rules to explain the effect of variability in travel time on the benefits perceived by an individual with the changes, and to model different actions that the individuals take in order to re-establish the steadiness of the existing timetable. The fuzzy model is used to handle the imprecision of the data which is unstructured text. The results show that large deviations in trip duration are more likely to induce significant changes in the timetable whereas small deviations are either ignored or translated into modified timing of the next activity. In choosing an action, greater importance is assigned to the flexibility of the following activity, to the magnitude of the trip time saving/delay, and to the duration of the next activity. Time savings are not favoured unless they can be readily transferred into additional activity time allocated to the next activity or to a new activity. The fuzzy rules based system is capable of predicting satisfactorily the strategy of coping with uncertainty in travel times and the satisfaction sensed with the change.     

Sample size and grouping in the estimation of disaggregate models—A simple case

Using a very simple form of disaggregate model for household car ownership, it appears that two widely held beliefs about disaggregate modelling — that analysis should always be carried out on individual households, and that sample sizes of 500 to 1000 are generally sufficient - are not necessarily valid. Though the results may not be generalizable to the full class of problems to which disaggregate analysis addresses itself, it does seem that more attention needs to be given to the questions of sample size and grouping.In addition, the standard test of goodness of fit (the so-called rho-squared test) is shown to be extremely weak. A far stronger and to some extent complementary, test is to compare the log-likelihood value given by the model with that on the basis of the full or saturated model — a test which has recently been clearly presented by a number of writers in the statistical literature. When using dummy variables, it is important that pair-wise tests on coefficients relating to various levels of the same attribute should be carried out, as well as the standard test assessing difference from zero.These points are illustrated by a number of simple examples.The abstract of this paper appears on p. 369.     

Teleworking in the Netherlands: an evaluation of changes in travel behaviour

This article describes the first experiment on teleworking in the Netherlands, and presents the results of an analysis of the impact of teleworking on the travel behaviour of the participants in the experiment and their household members. It was concluded that teleworking has resulted in a significant decrease in the total number of trips by teleworkers (–17%). Peak-hour traffic by car has been reduced even more (–26%). An unexpected result was that the household members of the teleworkers also appeared to travel less than before the experiment.     

A note on the calculation and calibration of doubly constrained trip distribution models

The use of growth factor models for trip distribution has given way in the past to the use of more complex synthetic models. Nevertheless growth factor models are still used, for example in modelling external trips, in small area studies, in input-output analysis, and in category analysis. In this article a particular growth factor model, the Furness, is examined. Its application and functional form are described together with the method of iteration used in its operation. The expected information statistic is described and interpreted and it is shown that the Furness model predicts a trip distribution which, when compared with observed trips, has the minimum expected information subject to origin and destination constraints. An equivalent entropy maximising derivation is described and the two methods compared to show how the Furness iteration can be used in gravity models with specified deterrence functions. A trip distribution model explicitly incorporating information from observed trips, is then derived.It is suggested that if consistency is to be maintained between iteration, calibration, and the derivation of gravity models, then expected information should be used as the calibration statistic to measure goodness of fit. The importance of consistency in this respect is often overlooked.Lastly, the limitations of the models are discussed and it is suggested that it may be better to use the Furness iteration rather than any other, since it is more fully understood. In particular its ease of calculation makes it suitable for use in small models computed by hand.     

The state-of-the-art of “comprehensive” planning

Planning occurs as a part of governmental operations wherever decision-making happens. For US metropolitan areas, the locuses of decision-making are multiple, ranging in scale from very small jurisdictions up through the hierarchy to state and federal levels, and in function from general governments to many special-purpose agencies — transportation, health care, education, etc. Almost all might affect or be affected by urban transportation decisions and actions. Since no one of these units of government is comprehensive in authority and activity, there is no single, centralized planning operation that is truly comprehensive. Pluralistic planning is increasingly trying to foresee and to accommodate the interactions among the various levels and functions. Instead of fragmenting, with the fragments pulled apart and insulated, we need to move toward partitioning, not merely to delimit boundaries but also to identify interfaces. This movement is hampered by the differentials in the development of the state-of-the-art of the technical planning process now used by the several levels and functional units of government. This is most advanced, and most effective, for small, homogeneous suburban jurisdictions primarily concerned with guiding and controlling physical development; it is in disarray in central cities trying to cope with social and economic problems as well as with physical deterioration; at the metropolitan scale it is highly developed technically but not very influential. There is a trend toward a network of planning activities that recognizes and facilitates interrelationships and interactions, both vertically among functional boundaries and horizontally across geographical-scale distinctions — a trend toward the comprehensive —but we have a very long way to go.Paper prepared for the Highway Research Board Conference on Organization for Continuing Urban Transportation Planning.     

What is induced traffic?

Investment in new or up-graded roads both raises the level and alters the pattern of accessibility over the whole area served by the road system. Vehicle-users will perceive the opportunities that this increased accessibility offers and respond in various ways, most of which can lead to more rather than less travel on the system. To the extent that travel increases overall, it can be said to have been induced by the road-improvement. Conversely, congestion as it spreads on the network will deter some travel and can be said to have a traffic suppression effect.The purpose of this first paper is to spell out, as clearly as possible, what is meant by induced traffic and to relate its various components to the full range of behavioural responses by travellers. In doing so, it draws upon the recently published (December 1994) report by the Standing Advisory Committee on Trunk Road Assessment (SACTRA) and response by the UK Government. The paper concludes with some of the implications of induced/suppressed traffic for current methods of forecasting and evaluation of road investment, which are covered in more detail by subsequent authors.     

Analyzing the preference for non-exclusive forms of telecommuting: Modeling and policy implications

This study examines three models of the individual's preference for home- and center-based telecommuting. Issues concerning the estimation of discrete models when the alternatives are non-exclusive are discussed. Two binary logit models are presented, one on the preference to telecommute from a center versus not telecommuting from a center (adjusted ² = 0.24), and the other on the preference to telecommute from a center over telecommuting from home (adjusted ² = 0.64). A nested logit model is also estimated on the following four alternatives: preferring not to telecommute, preferring either form of telecommuting, preferring to telecommute from home, and preferring to telecommute from a center (adjusted ² = 0.35).The results of the models illustrated the importance of attitudinal measures in measuring an individual's preference to telecommute. Oblique factor scores representing workplace interaction, stress, workaholism, internal control, and commute stress were statistically significant in some or all of the models. Other explanatory variables which were found to be consistently significant were education, job suitability, and age. Most respondents preferred either to telecommute from home or were indifferent between either form of telecommuting, which raises the question as to whether there really is a sizeable market niche to be filled by telecommuting centers, and hence whether they may make a significant contribution to transportation demand reduction.     

The design of bus route systems — An interactive location-allocation approach

An interactive modelling approach is developed to solve the practical problem of bus route network design. Possible bus routes are identified with facilities which can be located. Zones or pairs of zones in the urban area are identified with customers who will be allocated to the established facilities. It is shown that the classical Set Covering Problem is useful under the assumption of fixed demand; the Simple Plant Location Problem is effective under the assumption of demand which is sensitive to the level of bus service provided.     

The benefits to the public of vehicle legislation — Attempts to measure the unmeasurable

Although inevitably there are grey areas, a distinction may be drawn between environmental disbenefits arising from vehicles which cause annoyance, such as noise, or loss of peace and quiet, vibration, visual intrusion, severance, and those which endanger life and limb. Legislation implemented to reduce either category will inevitably generate costs.It is suggested that in evaluating legislation relating to environmental nuisance, attempts should be made carefully to measure the benefits, while for legislation when life and limb is involved a cost-effectiveness approach should be adopted. Methods currently available to measure environmental nuisance arising from vehicles, for example opinion surveys, observing the effect of changes in some independent indicator, and simulation exercises are critically examined. Using evidence from the Urban Motorway Committee Reports, Noise Advisory Council, Transport and Road Research Laboratory surveys on the effect of traffic in selected High Streets, and the Realistic Environment Assessment Laboratory, Social and Community Planning Research ping-pong technique, studies of house price differentials, and estimates of willingness-to-pay for exclusion facilities, an attempt is made to highlight the dilemma that while benefits of environmental nuisance legislation should be carefully weighed against the anti-pollution costs, techniques currently available for measuring such benefits are very underdeveloped.Paradoxically there is a far more clear-cut procedure for valuing benefits of policies affecting life and limb. Official accident evaluation policy in the U.K. is described, and legislation affecting life and limb is examined.Finally, difficulties of effectively enforcing legislation of both environmental nuisance and life and limb categories are illustrated.     

Uncertain demand,modal competition and optimal price-capacity adjustments in air transportation

A new microeconomic model for the operation of an airline facing modal competition with uncertain total demand is developed to analyze optimal price capacity combinations. The novelty is the treatment of the capacity restriction, which is not viewed as affecting negatively individual preferences (e.g. probability of a full flight), but does influence aggregate utility. A mode choice model is used to represent unrestricted individual preferences assuming full availability (phone call demand); air capacity is treated as a variable that acts on the actual choice set. Restricted choices and total demand stochasticity are integrated in welfare calculations (users' benefits and profits). Numerical examples are given and results are analyzed in terms of load factors fare levels, and sensitivity to the stochasticity of requests.This research was partially funded by FONDECYT, Chile, Direction Génerale de l'Aviation Civile, France, the Andes Foundation and the Fulbright Commission.     

Indicators of urban accessibility: Theory and application

The concept of accessibility and its related indicators have been in use for a long time, with still diverging interpretations of their significance and formulation. In this paper, a review is made of various existing theoretical bases, with special emphasis on recent behavioural approaches. It is suggested that this theoretical framework now allows a better appraisal of accessibility indicators and precise recommendations are proposed for their practical formulation and use. Various examples are given, especially for disaggregate analysis where a calculation for a given person is proposed instead of the conventional calculation .by a given mode. Finally, the relations between accessibility and trip rate are examined; from a study made in French cities, it is suggested that accessibility is a powerful determinant of trip rate.     

Gateway diversity and competition in international air transportation

Because of the existence of limited designation gateways, i.e., gateways for international air travel where entry by U.S. flag carriers is limited (in many cases to only one carrier), the U.S. Civil Aeronautics Board (CAB) has announced a policy of gateway competition. This policy seeks to maximize inter-gateway competition as a goal of the carrier selection process. The paper reviews the rationale and history of this policy and the economic principles of gateway competition. After addressing exceptions where gateway competition does not enhance competitive goals, the issue of how to enforce the credibility of the bidding process in route awards is addressed. The paper concludes by identifying circumstances where competitive objectives are not advanced through application of the principle gateway competition.     

Characterization and evolution of spatial density patterns in urban areas

This paper examines the spatial patterns of population density, household automobile ownership and other socio-demographic variables that affect urban travel, as a function of distance from the central city core. Spatial density functions provide a useful characterization of urban structure, and of its evolution when taken at different time intervals. Analysis of the data from four case cities (Austin, Atlanta, Dallas, Phoenix) for 1960, 1970 and 1980 reveals continuing overall dispersion away from the traditional central core, accompanied by the densification of formerly low-density suburbs. This presents implications for high congestion levels in the densifying suburban communities, comparable to those typically associated with the CBD. In addition, the analysis has captured the continuing growth of average household automobile ownership and revealed a distinct spatial pattern that seems to be robust across the case areas considered, as well as within radial corridors in the one case that was so analyzed (Austin).List of symbols Y gross population density in census tractt - X _t distance in miles from the center of tract to the CBD - parameter representing the central business district density - y density gradient parameter - X₀, X₁, X2, and X3 locations of the knots in a three segment division of the x-axis - D_i dummy variable defined for thei-th segment - ₁ normally distributed disturbance term,a _i,b _i,c _i,d _i,i = 1, 2, 3 — parameters to be estimated - A _t area of census tractt     

Car availability change in England and Wales 1971–1981

The aggregate dynamics of car ownership have overshadowed the dynamics of car ownership and availability at the personal and household level. These dynamics have only recently been investigated in more depth. This paper contributes to this work by probing a special data source, theLongitudinal Study (LS) produced by the Office of Population Censuses and Surveys, for the changes in household car availability.The paper describes the LS and explains its special format, as a Census-based ~1% sample of the population of England and Wales.The analysis focuses on the car availability dynamics of a number of groups defined by changes in their life cycle position. Special attention is given to those households where the LS member remains a dependent child throughout the study period.The results show that all studied household types increase and decrease their car holdings, but that there are patterns in this process, which vary from group to group. In particular, the size of the previous car fleet has a different influence on the current fleet size from life cycle group to life cycle group.The paper argues in its conclusion to incorporate these differentials into the further work on car ownership and car ownership change.The work reported here was performed, while the author was a staff member of the Centre for Transport Studies, Imperial College, London.     

Evaluating employer programs encouraging the use of alternate transportation modes: Two studies

Since 1976, major Denver metropolitan area firms have been required to encourage employees to use mass transit, carpooling, bicycling, and other alternate transportation modes to commute to work. The encouragement programs of 36 firms were clearly associated with greater use of alternate transportation modes, with the portion of variance in alternate transportation use explained by differences in employer programs of approximately 15%. The effects of the programs on deterring alternate mode users from returning to solo driving are consistently weaker than their effects on persuading drivers to try alternate transportation modes initially. Recommendations for the conduct of alternate transportation encouragement programs are made, based on these and other results. In addition, two recommendations are made concerning the evaluation of encouragement programs: that aggregate percentage change in alternate transportation use should not be used as the sole measure of success, and that environmental variables such as the availability of and pressure for use of alternate transportation modes should be measured and controlled.     

Modeling intrametropolitan industrial location realistically

This paper compares intrametropolitan industrial location models to the process of intrametropolitan industrial location as described in the real estate and urban economic literature. It identifies seven areas where industrial location models are at odds with reality, and suggests ways to make them realistic. Specifically, it makes a case for microanalytic/stochastic/recursive/dynamic/economic industrial location models. It goes on to describe an operational model that is realistic in most respects.     

Market segmentation as a mechanism in allowing for variability of traveller behaviour

A major problem with aggregate transport planning models is the accounting of variability in traveller behaviour when the basic unit of analysis is the geographical traffic zone. In an attempt to allow for this variance, recent attention has been given to the role of socio-economic (user and household) characteristics in systematically identifying a homogeneous grouping of travellers with respect to the issue under study rather than restricting the grouping definition according to physical geographical criteria alone. This homogeneous grouping criterion combined eventually with a necessity to represent travel demand in a spatial context, can assist in improving our ability to explain real travel patterns by the development of an improved aggregation condition. The emphasis is on modelling homogeneous groups of travellers separately, and then relating the individual sets of results to each other to obtain an aggregate prediction of behaviour via a knowledge of the representativeness of each group contained in the total sample. This paper presents a technique to identify the relative homogeneity of travellers in accordance with a specified criterion, and illustrates its use with individual household data for the Sydney Metropolitan Area. The paper concludes with a discussion of the advantages of segmentation in operational transport planning, in particular with reference to the aggregation of disaggregate behavioural travel choice models, or movement from a micro-model of individual choice behaviour to an aggregate model of travel demanu.     

Trucking industry demand for urban shared use freight terminals

The issue of shared use urban freight facilities first received attention during the 1970s when it was observed that, while inter-urban freight movements were becoming increasingly efficient, there were significant diseconomies in the movement of freight via truck within urban areas. Early research suggested that shared urban freight facilities should be constructed so that trucking companies could consolidate smaller shipments into larger ones. In the past few years, the concept of Urban Ports has gained increasing attention, not just for carriers who need to load and unload freight, but to provide a place near the urban center for truckers to wait out peak traffic periods. In this paper, using recently developed survey data, we examine trucking company interest in such facilities by examining the results of an ordered probit demand model.