Effectiveness of using variable message signs to disseminate dynamic traffic information: Evidence from field trails in European cities

Variable message signs (VMS) can provide up‐to‐date traffic information and guidance to drivers through electronic signs at the roadside. The paper draws together the results from VMS field trials conducted in nine cities as part of European Union‐sponsored research projects carried out between 1994 and 1999. The projects followed common guidelines in carrying out field trial evaluations, which has enabled generalized findings to be made on the impacts of the different VMS applications. The main emphasis in the paper is on drivers' reactions to VMS and the impacts of VMS on road network efficiency. Results are reported for four different types of traffic information. For incident messages, it is not only the severity of the problem reported that influences the level of diversions, but also other factors such as the specific location mentioned and the availability of viable alternative routes to avoid the problem location. For route guidance information, it is demonstrated that substantial diversions occur when the route advice differs from that given normally. For continuous information describing the traffic state on a major route, information increases the use of the major route and reduces use of alternative routes if there are no traffic problems reported on the major route. Travel time information was well regarded by drivers and found to be effective in inducing route changes. In general, the deployments of VMS to inform drivers of traffic conditions have proved successful in terms of improving network travel times and reducing environmental impacts. Whilst such changes have been relatively small, driver perception of the benefits is much higher. This is potentially very significant in terms of the role that VMS can play in the development of integrated transport strategies, as the provision of information may encourage greater acceptance of a range of demand management measures.     

A computational model for the probit‐based dynamic stochastic user optimal traffic assignment problem

This paper focuses on computational model development for the probit‐based dynamic stochastic user optimal (P‐DSUO) traffic assignment problem. We first examine a general fixed‐point formulation for the P‐DSUO traffic assignment problem, and subsequently propose a computational model that can find an approximated solution of the interest problem. The computational model includes four components: a strategy to determine a set of the prevailing routes between each origin–destination pair, a method to estimate the covariance of perceived travel time for any two prevailing routes, a cell transmission model‐based traffic performance model to calculate the actual route travel time used by the probit‐based dynamic stochastic network loading procedure, and an iterative solution algorithm solving the customized fixed‐point model. The Ishikawa algorithm is proposed to solve the computational model. A comparison study is carried out to investigate the efficiency and accuracy of the proposed algorithm with the method of successive averages. Two numerical examples are used to assess the computational model and the algorithm proposed. Results show that Ishikawa algorithm has better accuracy for smaller network despite requiring longer computational time. Nevertheless, it could not converge for larger network. Copyright © 2010 John Wiley & Sons, Ltd.     

German transport policy after reunification

Due to the development after the reunification of Germany, the opening of Eastern Europe and the creation of the Single European Market, German transport policy is facing great challenges. We must not only cope with considerable increases in traffic but also with geographically reoriented traffic flows and structural changes. German transport policy will tackle these challenges of the future with the aid of five strategies: (a) the integration of the individual modes of transport; (b) the exploitation of the possibilities offered by modern technology; (c) investments in the construction of new traffic routes and the improvement of existing ones; (d) the consistent utilization of the forces of the market in the transport sector; (e) the protection of the environment and the enhancement of road safety. These strategies are a constituent part of an integrated overall transport concept, which will put Germany in a position to satisfy the evergrowing demands in the field of transport.     

A revised branch‐and‐price algorithm for dial‐a‐ride problems with the consideration of time‐dependent travel cost

Developing demand responsive transit systems are important with regard to meeting the travel needs for elderly people. Although Dial‐a‐ride Problems (DARP) have been discussed for several decades, most researchers have worked to develop algorithms with low computational cost under the minimal total travel costs, and fewer studies have considered how changes in travel time might affect the vehicle routes and service sequences. Ignoring such variations in travel time when design vehicle routes and schedules might lead to the production of inefficient vehicle routes, as well as incorrect actual vehicle arrival times at the related nodes. The purpose of this paper is to construct a DARP formulation with consideration of time‐dependent travel times and utilizes the traffic simulation software, DynaTAIWAN, to simulate the real traffic conditions in order to obtain the time‐dependent travel time matrices. The branch‐and‐price approach is introduced for the time‐dependent DARP and tested by examining the sub‐network of Kaohsiung City, Taiwan. The numerical results reveal that the length of the time window can significantly affect the vehicle routes and quantitative measurements. As the length of the time window increases, the objective value and the number of vehicles will reduce significantly. However, the CPU time, the average pickup delay time, the average delivery delay time and the average actual ride time (ART)/direct ride time (DRT) will increase significantly as the length of the time window increases. Designing the vehicle routes to reduce operating costs and satisfy the requirements of customers is a difficult task, and a trade‐off must be made between these goals. Copyright © 2014 John Wiley & Sons, Ltd.     

Non‐physical barriers to traffic flow and the PTA programme of action: problems and prospects

A lot of resources have .been committed to the provision of transport infrastructure in Eastern and Southern Africa. Some of these resources have been borrowed from outside and have to be repaid. Hence the need to maximize their use. However, this is being minimized by non‐infrastructural bottlenecks to traffic flow. These range from macro‐economic constraints with implications for passenger (bus) transport such as the non‐availability or acute shortage of foreign exchange to slow, cumbersome documentation procedures particularly for cross‐border traffic.

The Preferential Trade Area (PTA) for Eastern and Southern Africa is geared to the reduction and eventual elimination of actual and potential non‐physical barriers to traffic flow, for which it has instituted a number of schemes. After introductory remarks on the sub‐regional economy, its transport sector and avenues for sub‐regional cooperation and the implementation of these schemes is assessed and other non‐physical barriers yet to be addressed by the PTA are examined before conclusions are drawn.     

Passenger route guidance system for multi‐modal transit networks

In many public transport oriented cities in the world, especially Asian cities, the public transport system has been developed extensively, to the extent that it has become increasingly difficult to navigate. Although inter‐modal transfers are common and often necessary, a complete set of the routes across transport modes is generally not presented in a form that is accessible to travelers, as each operator would only publish its own routes. Moreover, the common nonlinear fare tables together with inter‐modal fare discounts pose challenges to travelers in deciding their best routes. This study develops a multi‐modal passenger route guidance system, called eFinder, to aid travelers with their combined mode‐route choices. We discuss the architecture and features of this system in this study. This system forms a platform for disseminating public transit information and should complement further development and use of the public transport network by enabling travelers to make informed choices.     

Generic Framework for Transport Network Designs: Applications and Treatment in Intermodal Freight Transport Literature

Abstract

Six principles for the design of transport systems are described, including direct link, corridor, hub‐and‐spoke, connected hubs, static routes, and dynamic routes. The designs are theoretically discussed, defining the operational character of each design and their application in passenger, freight and rail freight transport. The theory is then applied to intermodal freight transport by comparing the terminology used in the paper with that in the scientific literature. The advantages of using a generic terminology over contextual ones are identified from the perspectives of researchers, commercial operators and policy‐makers.     

Air traffic assignment to reduce population noise exposure using activity-based approach

Aircraft noise has been regarded as one of the major environmental issues related to air transport. Many airports have introduced a variety of measures to reduce its impact. Several air traffic assignment strategies have been proposed in order to allocate noise more wisely. Even though each decision regarding the assignment of aircraft to routes should consider population exposure to noise, none of the air traffic assignment strategies has addressed daily migrations of population and number of people exposed to noise. The aim of this research is to develop a mathematical model and a heuristic algorithm that could assign aircraft to departure and arrival routes so that number of people exposed to noise is as low as possible, taking into account temporal and spatial variations in population in an airport’s vicinity. The approach was demonstrated on Belgrade airport to show the benefits of the proposed model. Numerical example showed that population exposure to noise could be reduced significantly by applying the proposed air traffic assignment model. As a consequence of the proposed air traffic assignment, overall fuel consumption increased by less than 1%.     

Drivers' route choice and learning mechanism under bounded information environment

In this paper, we propose the theory of Rational Beliefs as the model of expectations that extends the theory of rational expectations to the postulated environments. Under the rational beliefs paradigm, drivers do not have structural knowledge of traffic conditions and they choose their routes based only on personal experiences and decision‐making rules. We found that if drivers have different decision‐making rules and experiences, then they form different beliefs of traffic conditions (e.g. average travel time) even though they have the same public information and use the same routes. Under the rational beliefs model, drivers are not motivated to renew their beliefs because the beliefs are compatible with their experiences. Therefore, the heterogeneity of beliefs does not disappear even though they have long‐term learning. In order to investigate how drivers form their beliefs of traffic conditions under bounded information environments, numerical experiment is carried out.     

Developing evasive action‐based indicators for identifying pedestrian conflicts in less organized traffic environments

There has been a growing interest in using surrogate safety measures such as traffic conflicts to analyse road safety from a broader perspective than collision data alone. This growing interest has been aided by recent advances in automated video‐based traffic conflict analysis. The automation enables accurate calculation of various conflict indicators such as time‐to‐collision and post‐encroachment time. These indicators rely on road users getting within specific temporal and spatial proximity from each other and therefore assume that proximity is a surrogate for conflict severity. However, this assumption may not be valid in many driving environments where close interactions between road users are common. The objective of this paper is to investigate the applicability of time proximity conflict indicators for evaluating pedestrian safety in less‐organized traffic environments with a high mix of road users. Several alternative behavioural conflict indicators based on detecting pedestrian evasive actions are recommended to better measure traffic conflicts in such traffic environments. These indicators represent variations in the spatio‐temporal gait parameters (step length, step frequency and walk ratio) immediately before the conflict point. A highly congested shared intersection in Shanghai, China, with frequent pedestrian conflicts is used as a case study. Traffic conflicts are analysed with the use of automated video‐based analysis techniques. The results showed that evasive action‐based indicators have higher potential to identify pedestrian conflicts and measure their severity in high mix less organized traffic environments than time proximity measures such as time‐to‐collision and post‐encroachment time. Copyright © 2016 John Wiley & Sons, Ltd.     

The effects of the 2013 floods on Germany’s freight traffic

This article analyzes the spatio-temporal effect of the 2013 floods on freight traffic in Germany by using automatic traffic counter data. The methodology uses a proven time-series outlier detection and identification technique to endogenously determine if a counter was affected during the flood and estimate the magnitude and duration of the change in the number of vehicles passing through it. This is the first paper able to quantify climate-related variations in traffic across all the counters of a national network. Results show variations on 10% of all counters and 23% of all main roads. Results allow us to trace the configuration of disrupted and detour routes, recovery times, and the total effect on the network. Our findings serve as an input to other studies on the impact of exogenous events on the transport system and contribute towards the formulation of public policies to improve road resilience.     

Merging bus routes in Hong Kong’s central business district: Analysis and models

A significant portion of the 200,000 people working in Hong Kong’s central business district (CBD) relies on buses as their primary means of transport. During peak hours, nearly a thousand double-decker buses pour into a tiny area of 150 ha. This causes traffic congestion and air pollution. Moreover, given that the flow is uni-directional (into the CBD in the morning and out of the CBD in the afternoon), the occupancy of buses in the CBD is actually low.In this paper, we propose to reduce traffic congestion and to increase bus occupancy by merging bus routes. We describe the peculiar situation of the CBD in Hong Kong and explain the necessary conditions for the possible success of merging routes. Our analysis shows that merging will lead to an overall benefit for all parties, including government, bus operators, and passengers. The actual merging decisions, which routes to merge and at what frequencies buses should run, are determined by a mathematical model. The model also shows quantitatively the benefits of merging routes and the impacts of other factors. The procedure that we follow and the model that we adopt can be applied to other CBD.     

Transport bottlenecks and Tanzania's economic problems

Abstract

The paper discusses Tanzania's transport problems in the context of the prevailing acute economic crisis. It looks at the development of the transport system, especially the rail and road network, from the German days to the new Chinese‐built Tanzania‐Zambia Railway. The East‐West orientation of the major parallel rail lines and roads reflects the dependency of the economy on export‐import trade. A major challenge to the transport system is the haulage of agricultural products, mainly for export but also for the internal market, not to mention the haulage of imported commodities.

The provision and utilization of transport services is discussed in the context of the historical, and institutional setting of the road haulage industry, particularly its public and private sector configurations. Due to scarcity of foreign exchange, both sectors, especially the private, are starved of vehicles and spare parts.

The operation of ocean and lake shipping services and Air Tanzania are discussed. It is recommended that the latter should concentrate on essential domestic services plus some limited regional services. External financing of transport projects and its implications are also considered.

It is concluded that despite the break‐up of the East African transport system, the Tanzanian transport system, although shaky, has avoided major breakdowns and in some cases, especially in trade, has provided the foundation for at least medium‐term improvements. More attention is recommended to organizational problems of track use by freight and passenger carriers and to making the best use of existing facilities.     

Modelling the provision of transport with planned or market‐determined public transport services

Implications of the difference between planned and market‐determined public transport services for the modelling of the transport system and its use are examined. In the former case, the task for government seeking to optimise performance of the transport system has a standard bi‐level form, but in the latter case, the lower‐level problem in the bi‐level formulation is to determine mutually consistent solutions to a pair of optimisation problems. The relevance of the mutually consistent solution in this context is contrasted with its sometimes misleading role in the context of optimisation of urban traffic signal control.     

Simulation model for the analysis of complex traffic weaving problems

A simulation modeling approach has been developed to analyze a complex traffic weaving problem. It is presented, discussed, and demonstrated on an actual dual purpose weaving area that is closely followed by an entrance‐exit junction. Specifically, the model identifies problem areas in the system, assists the traffic engineer in the formulation of feasible solution strategies, and analyzes the effectiveness of alternative strategies. The simulation model is not presented as a panacea to weaving analysis rather as an interesting and unique approach that has the potential to analyze a wide variety of weaving patterns. The primary conclusion of the paper is that the model can be a valuable tool for analysis of certain types of traffic congestion problems.     

Modelling the resilience,friability and costs of an air transport network affected by a large-scale disruptive event

This paper deals with developing a methodology for estimating the resilience, friability, and costs of an air transport network affected by a large-scale disruptive event. The network consists of airports and airspace/air routes between them where airlines operate their flights. Resilience is considered as the ability of the network to neutralize the impacts of disruptive event(s). Friability implies reducing the network’s existing resilience due to removing particular nodes/airports and/or links/air routes, and consequently cancelling the affected airline flights. The costs imply additional expenses imposed on airports, airlines, and air passengers as the potentially most affected actors/stakeholders due to mitigating actions such as delaying, cancelling and rerouting particular affected flights. These actions aim at maintaining both the network’s resilience and safety at the acceptable level under given conditions.Large scale disruptive events, which can compromise the resilience and friability of a given air transport network, include bad weather, failures of particular (crucial) network components, the industrial actions of the air transport staff, natural disasters, terrorist threats/attacks and traffic incidents/accidents.The methodology is applied to the selected real-life case under given conditions. In addition, this methodology could be used for pre-selecting the location of airline hub airport(s), assessing the resilience of planned airline schedules and the prospective consequences, and designing mitigating measures before, during, and in the aftermath of a disruptive event. As such, it could, with slight modifications, be applied to transport networks operated by other transport modes.     

Multimodal,multiclass stochastic dynamic traffic assignment for evaluating information provision strategies

A multimodal, multiclass stochastic dynamic traffic assignment model was developed to evaluate pre‐trip and enroute travel information provision strategies. Three different information strategies were examined: user optimum [UO], system optimum [SO] and mixed optimum [MO]. These information provision strategies were analyzed based on the levels of traffic congestion and market penetration rate for the information equipment. Only two modes, bus and car, were used for evaluating and calculating the modal split ratio. Several scenarios were analyzed using day‐to‐day and within day dynamic models. From the results analyzed, it was found that when a traffic manager provides information for drivers using the UO strategy and drivers follow the provided information absolutely, the total travel time may increases over the case with no information. Such worsening occurs when drivers switch their routes and face traffic congestion on the alternative route. This phenomenon is the 'Braess Paradox'.     

Development of a differential route share model for railroad freight traffic

This paper summarizes work undertaken towards development and calibration of a model to predict the distribution of rail freight traffic among competing routes. The model is designed for use in analyzing the traffic effects of changes in the level-of-service on selected rail lines. The model predicts route shares based on the overall network configuration of each railroad participating in a given market. The model selects feasible routes, discards those routes which appear to be too circuitous or costly, and then assigns traffic to the remaining routes in accordance with several network characteristics. It is designed to be sensitive to level-of-service changes, and to simulate the response of shippers and railroads to a competitive environment. A multiple route-finding algorithm was used to find possible routes based on the number of railroads operating at the originating and terminating end of a market. Multiple routes were determined and matched with observed traffic flows from the ICC One-Percent Waybill Sample. Physical network characteristics for each route, including distance, junction frequency, and “impedance,” were calculated from the network model and were correlated with the traffic share observed on each route in the market. A two-stage model was developed to find feasible routes from the set of possible routes and to allocate traffic to feasible routes based on levels-of-service. The model was calibrated on 9,793 routes from 1,199 markets with twenty or more carloads from the 1977 One-Percent Carload Waybill Sample. Model calibration supported the hypothesis that network route characteristics did indeed influence shipper choice of route, and that a normative model could be used to assess relative attractiveness of routes under various railroad corporate ownership restructuring scenarios.     

Improvement of the volume-delay function by incorporating the impact of trucks on traffic flow

In current transportation modelling, travel time is the most important factor in decisions regarding transport modes, destinations and routes. The calculation of travel time is deployed by volume-delay functions (VDFs), a sub-model of route assignment procedure, using the correlation between increasing numbers of vehicles on a road and the road's restrictive capacity. By investigating existing VDFs, a clear gap is seen, demonstrating that current functions are not suited to reflect the empirically known large impact of trucks on passenger car travel times. This issue becomes crucial when transport models are used to reflect future scenarios where goods transportation is expected to increase greatly, and when transport models combine passenger and commercial traffic. This paper presents a new VDF which successfully includes trucks’ impact on traffic flow in the case of Germany and, with slight deviations, for North America. The function is developed using ideal-type data for German motorways. The differences between German and US data and their implications for VDFs are also discussed.     

Network models in traffic management and control

Abstract

The context for network modelling in traffic management and control is described in terms of the current area‐wide nature of traffic management and the range of objectives to which it can contribute. Representation of a road system and traffic management measures in terms of nodes and links and parameters associated with them is described. It is shown that the pattern of traffic has to be represented not only in terms of flows on links of the network but also in terms of numbers of movements per unit time between points of entry to and points of exit from the area being modelled. In modelling so far, these numbers of movements are regarded as given, but the routes taken are estimated by traffic assignment. Models can so far be used for comparison of a range of given schemes and for optimization of traffic control within a scheme. Variation over time is a central feature of the modelling, and this requires the use of time‐dependent queueing theory, and the specification of numbers of movements for a succession of periods of between 10 and 30 minutes. Theoretical approaches to the resulting problems of modelling and optimization are discussed, and the ways in which these are supplemented by heuristic methods in currently available models is described. Some requirements‐for further research are outlined.