The role of volume-delay functions in forecasting and evaluating congestion charging schemes: the Stockholm case

This paper uses observations from before and during the Stockkholm congestion charging trial in order to validate and improve a transportation model for Stockholm. The model overestimates the impact of the charges on traffic volumes while at the same time it substantially underestimates the impact on travel times. These forecast errors lead to considerable underestimation of economic benefits which are dominated by travel time savings. The source of error lies in the static assignment that is used in the model. Making the volume-delay functions (VDFs) steeper only marginally improves the quality of forecast but strongly impacts the result of benefit calculations. We therefore conclude that the dynamic assignment is crucial for an informed decision on introducing measures aimed at relieving congestion. However, in the absence of such a calibrated dynamic model for a city, we recommend that at least a sensitivity analysis with respect to the slope of VDFs is performed.     

Key factors influencing the global passenger transport dynamics using the AIM/transport model

A bottom-up passenger transport model named AIM (Asia-pacific Integrated Model)/Transport model is developed by incorporating behavioral parameters and transportation technological details. This model is based on discrete based choice modelling covering 17 global regions soft-linked with the AIM/CGE (Computable General Equilibrium) model. In this paper, the model is used to assess the impact of various factors like travel time, energy efficiency improvement, load factor, mode preference along with environmental awareness factors on transport demand, energy and emissions. The modelling assessment results show that travel speed and land-use patterns have significant impact on the travel demand. High occupancy rate and shift towards the mass-transit system result in energy and emissions reduction. Implementation of carbon tax aligned with the two-degree target results in a 22% cumulative emission reduction from 2005 to 2100 relative to the baseline case. However, the reduction potential can be increased to 42% by combining behavioral and technology related mitigation options like mass-transit system speed improvement, transit oriented development, efficiency improvement, preference towards eco-friendly technologies and high vehicle occupancy.     

Optimal tolls for multi-class traffic: Analytical formulations and policy implications

This paper puts together an analytical formulation to compute optimal tolls for multi-class traffic. The formulation is comprised of two major modules. The first one is an optimization component aimed at computing optimal tolls assuming a Stackelberg game in which the toll agency sets the tolls, and the equilibrating traffic plays the role of the followers. The optimization component is supported by a set of cost models that estimate the externalities as a function of a multivariate vector of traffic flows. These models were estimated using Taylor series expansions of the output obtained from traffic simulations of a hypothetical test case. Of importance to the paper is the total travel time function estimated using this approach that expresses total travel time as a multivariate function of the traffic volumes. The formulation presented in the paper is then applied to a variety of scenarios to gain insight into the optimality of current toll policies. The optimal tolls are computed for two different cases: independent tolls, and tolls proportional to passenger car equivalencies (PCE).The numerical results clearly show that setting tolls proportional to PCEs leads to lower values of welfare that are on average 15% lower than when using independent tolls, though, in some cases the total welfare could be up to 33% lower. This is a consequence of two factors. First, the case of independent tolls has more degrees of freedom than the case of tolls proportional to PCEs. Second, tolls proportional to PCEs do not account for externalities other than congestion, which is likely to lead to lower welfare values.The analytical formulations and numerical results indicate that, because the total travel time is a non-linear function of the traffic volumes, the marginal social costs and thus the optimal congestion tolls also depend on the traffic volumes for each vehicle class. As a result of this, for the relatively low volumes of truck traffic observed in real life, the optimal congestion tolls for trucks could indeed be either lower or about the same as for passenger cars. This stand in sharp contrast with what is implied in the use of PCEs, i.e., that the contribution to congestion are constant. This latter assumption leads to optimal truck congestion tolls that are always proportional to the PCE values.The comparison of the toll ratios (truck tolls divided by passenger car tolls) for both observed and optimal conditions suggests that the tolls for small trucks are about the right level, maybe a slightly lower than optimal. However, the analysis of the toll ratio for large trucks seems to indicate a significant overcharge. The estimates show that the average observed toll ratio for large trucks is even higher than the maximum optimal toll ratio found in the numerical experiments. This suggests that the tolls for large trucks are set on the basis of revenue generation principles while the passenger car tolls are being set based on a mild form of welfare maximization. This leads to a suboptimal cross-subsidization of passenger car traffic in detriment of an important sector of the economy.     

基于乘客寻路行为的城市轨道交通车站导向标识序化设置研究

为实现轨道交通车站内客流快速疏散,避免因乘客滞留造成站内乘客出行效率低以及大客流压力导致的安全隐患等问题,本文对目前国内导向标识的设置原则及功能进行描述,依托大数据等信息化技术分析行人寻路行为机理及出行特征与导向标识序化设置间的关系,研究导向标识的序化设置,依据行人在不同交通设施的步行速度及信息处理时间,并提出在站内停顿点数量较多的通道、楼梯口及闸机处设置导向标识的位置,进而对导向标识的设置进行人性化和合理化的优化设置,对轨道车站内停顿点位置进行导向标识的合理布设,以快速引导行人进行出行决策,减少停顿点数量。     

On including travel time reliability of road traffic in appraisal

In many countries, decision-making on proposals for national or regional infrastructure projects in passenger and freight transport includes carrying out a cost–benefit analysis for these projects. Reductions in travel times are usually a key benefit. However, if a project also reduces the variability of travel time, travellers, freight operators and shippers will enjoy additional benefits, the ‘reliability benefits’. Until now, these benefits are usually not included in the cost–benefit analysis. To include reliability of travel or transport time in the cost–benefit analysis of infrastructure projects not only monetary values of reliability, but also reliability forecasting models are needed. As a result of an extensive feasibility study carried out for the German Federal Ministry of Transport, Building and Urban Development this paper aims to provide a literature overview and outcomes of an expert panel on how best to calculate and monetise reliability benefits, synthesised into recommendations for implementing travel time reliability into existing transport models in the short, medium, and long term. The paper focuses on road transport, which has also been the topic for most of the available literature on modelling and valuing transport time reliability.     

基于广西旅游业的道路客运发展探析

文章针对广西道路旅客运输的现状及广西道路客运企业发展旅游业的优越条件,以＂运游结合＂为切入点,介绍以快捷优质的客运服务带动＂慢旅游＂道路客运企业发展旅游业的新模式,对采取＂运游结合＂经营模式,提高服务质量,发展＂慢旅游＂提出了相关的建议。     

Long-term trends in domestic US passenger travel: the past 110 years and the next 90

Based upon a long-term historical data set of US passenger travel, a model is estimated to project aggregate transportation trends through 2100. One of the two model components projects total mobility (passenger-km traveled) per capita based on per person GDP and the expected utility of travel mode choices (logsum). The second model component has the functional form of a logit model, which assigns the projected travel demand to competing transportation modes. An iterative procedure ensures the average amount of travel time per person to remain at a pre-specified level through modifying the estimated value of time. The outputs from this model can be used as a first-order estimate of a future benchmark against which the effectiveness of various transportation policy measures or the impact of autonomous behavioral change can be assessed.     

GHG-emission models for assessing the eco-friendliness of road and rail freight transports

Intermodal rail/road transportation is an instrument of green logistics, which may help reducing transport related greenhouse gas (GHG) emissions. In order to assess the environmental impact of road and rail transports, researchers have formulated very detailed microscopic models, which determine vehicle emissions precisely based on a vast number of parameters. They also developed macroscopic models, which estimate emissions more roughly from few parameters that are considered most influential. One of the goals of this paper is to develop mesoscopic models that combine the preciseness of micro-models while requiring only little more information than macro-models. We propose emission models designed for transport planning purposes which are simple to calibrate by transport managers. Despite their compactness, our models are able to reflect the influence of various traffic conditions on a transport’s total emissions. Furthermore, contrasting most papers considering either the road or the rail mode, we provide models on a common basis for both modes of transportation. We validate our models using popular micro- and macroscopic models and we apply them to artificial and real world transport scenarios to identify under which circumstances intermodal transports actually effect lower emissions. We find that travel speed and country-specific energy emission factors influence the eco-friendliness of intermodal transports most severely. Hence, the particular route chosen for a transnational intermodal transport is an important but so far neglected option for eco-friendly transportation.     

Delay-based passenger car equivalents for trucks at signalized intersections

This paper presents a new methodology for computing passenger car equivalents at signalized intersections that is based on the delay concept. Unlike the commonly used headway-based methods that consider only the excess headway consumed by trucks, the delay-based approach fully considers the additional delay heavy vehicles cause on traffic stream. Delay-based passenger car equivalents are not constant, but depend on traffic volume, truck type and truck percentage. The field data indicated that the passenger car equivalents increase as the traffic volume and the percentage of heavy vehicles increase. The field data were used to calibrate TRAF-NETSIM simulation model that was used to cover a broad range of traffic conditions. Mathematical models to estimate the equivalencies were developed. The passenger car equivalent for single unit trucks vary from 1.00 to 1.37, and for combination trucks 1.00–2.18 depending on traffic volume and truck percentage. The passenger car equivalents are highly correlated with traffic volume and, to some degree, with percentage of heavy vehicles. Although the PCE of 1.5 recommended in the 1985 HCM seems to be more reasonable than the 2.0 recommended in the 1994 and 1997 HCM, both overestimate the impact of single unit trucks. For combination trucks, the 1997 HCM overestimates the capacity reduction effects of the trucks in most cases.     

Modelling the impact of weather conditions on active transportation travel behaviour

Three weather sensitive models are used to explore the relationship between weather and home-based work trips within the City of Toronto, focusing on active modes of transportation. The data are restricted to non-captive commuters who have the option of selecting among five basic modes of auto driver, auto passenger, transit, bike and walk. Daily trip rates in various weather conditions are assessed. Overall, the results confirm that impact of weather on active modes of transportation is significant enough to deserve attention at the research, data collection and planning levels.     

Crowding in public transport systems: Effects on users,operation and implications for the estimation of demand

The effects of high passenger density at bus stops, at rail stations, inside buses and trains are diverse. This paper examines the multiple dimensions of passenger crowding related to public transport demand, supply and operations, including effects on operating speed, waiting time, travel time reliability, passengers’ wellbeing, valuation of waiting and in-vehicle time savings, route and bus choice, and optimal levels of frequency, vehicle size and fare. Secondly, crowding externalities are estimated for rail and bus services in Sydney, in order to show the impact of crowding on the estimated value of in-vehicle time savings and demand prediction. Using Multinomial Logit (MNL) and Error Components (EC) models, we show that alternative assumptions concerning the threshold load factor that triggers a crowding externality effect do have an influence on the value of travel time (VTTS) for low occupancy levels (all passengers sitting); however, for high occupancy levels, alternative crowding models estimate similar VTTS. Importantly, if demand for a public transport service is estimated without explicit consideration of crowding as a source of disutility for passengers, demand will be overestimated if the service is designed to have a number of standees beyond a threshold, as analytically shown using a MNL choice model. More research is needed to explore if these findings hold with more complex choice models and in other contexts.     

Impact of heavy vehicles on surrounding traffic characteristics

This work examines the impact of heavy vehicle movements on measured traffic characteristics in detail. Although the number of heavy vehicles within the traffic stream is only a small percentage, their impact is prominent. Heavy vehicles impose physical and psychological effects on surrounding traffic flow because of their length and size (physical) and acceleration/deceleration (operational) characteristics. The objective of this work is to investigate the differences in traffic characteristics in the vicinity of heavy vehicles and passenger cars. The analysis focuses on heavy traffic conditions (level of service E) using a trajectory data of highway I‐80 in California. The results show that larger front and rear space gaps exist for heavy vehicles compared with passenger cars. This may be because of the limitations in manoeuvrability of heavy vehicles and the safety concerns of the rear vehicle drivers, respectively. In addition, heavy vehicle drivers mainly keep a constant speed and do not change their speed frequently. This work also examines the impact of heavy vehicles on their surrounding traffic in terms of average travel time and number of lane changing manoeuvres using Advanced Interactive Microscopic Simulator for Urban and Non‐Urban Networks (AIMSUN) microscopic traffic simulation package. According to the results, the average travel time increases when proportion of heavy vehicles rises in each lane. To reflect the impact of heavy vehicles on average travel time, a term related to heavy vehicle percentage is introduced into two different travel time equations, Bureau of Public Roads and Akçelik's travel time equations. The results show that using an exclusive term for heavy vehicles can better estimate the travel times for more than 10%. Finally, number of passenger car lane changing manoeuvres per lane will be more frequent when more heavy vehicles exist in that lane. The influence of heavy vehicles on the number of passenger car lane changing is intensified in higher traffic densities and higher percentage of heavy vehicles. Large numbers of lane changing manoeuvres can increase the number of traffic accidents and potentially reduce traffic safety. The results show an increase of 5% in the likelihood of accidents, when percentage of heavy vehicles increases to 30% of total traffic. Copyright © 2014 John Wiley & Sons, Ltd.     

Short-term prediction of border crossing time and traffic volume for commercial trucks: A case study for the Ambassador Bridge

Short-term forecasting of traffic characteristics, such as traffic flow, speed, travel time, and queue length, has gained considerable attention from transportation researchers and practitioners over past three decades. While past studies primarily focused on traffic characteristics on freeways or urban arterials this study places particular emphasis on modeling the crossing time over one of the busiest US–Canada bridges, the Ambassador Bridge. Using a month-long volume data from Remote Traffic Microwave Sensors and a yearlong Global Positioning System data for crossing time two sets of ANN models are designed, trained, and validated to perform short-term predictions of (1) the volume of trucks crossing the Ambassador Bridge and (2) the time it takes for the trucks to cross the bridge from one side to the other. The prediction of crossing time is contingent on truck volume on the bridge and therefore separate ANN models were trained to predict the volume. A multilayer feedforward neural network with backpropagation approach was used to train the ANN models. Predicted crossing times from the ANNs have a high correlation with the observed values. Evaluation indicators further confirmed the high forecasting capability of the trained ANN models. The ANN models from this study could be used for short-term forecasting of crossing time that would support operations of ITS technologies.     

Assessing the financial and social costs of public transport in differing operating environments and with endogenous demand

This paper uses a previously developed spreadsheet cost model which simulates public transport modes operated on a 12-km route to analyse the total costs of different passenger demand levels. The previous cost model was a very powerful tool to estimate the social and operator costs for different public transport technologies. However, as the model is strategic, some basic assumptions were made which are relaxed in this paper. First, the speed-flow equation in the original spreadsheet model assumes that speed decreases according to the ratio of the current frequency and the lane capacity which is based on the safety headway without taking into account passenger boardings. However, this may vary in different operating environments. Therefore, the speed-flow equation is improved by moving from a linear equation to a piecewise equation that considers the features of different operating environments. Second, the model assumes that supply is sufficient to meet demand. However, when the level of demand is high for the lower-capacity public transport technologies, passengers may find the incoming vehicle full and therefore, they have to wait more than one service interval. This paper applies queuing theory to investigate the probability of having to wait longer than the expected service headways which will affect the average passenger waiting time. The extra waiting time for each passenger is calculated and applied in the spreadsheet cost model. Third, the original model assumed that demand was externally fixed (exogenous). To evaluate the differences after applying these equations, endogenous demand rather than exogenous demand will be investigated by using the elasticities for passenger waiting time and journey time.     

Exploring passenger anxiety associated with train travel

Although people are often encouraged to use public transportation, the riding experience is not always comfortable. This study uses service items to measure passenger anxieties by applying a conceptual model based on the railway passenger service chain perspective. Passenger anxieties associated with train travel are measured using a modern psychometric method, the Rasch model. This study surveys 412 train passengers. Analytical results indicate that the following service items cause passenger anxiety during trains travel: crowding, delays, accessibility to a railway station, searching for the right train on a platform, and transferring trains. Empirical results obtained using the Rasch approach can be used to derive an effective strategy to reduce train passenger anxiety. This empirical study also demonstrates that anxiety differs based on passenger sex, age, riding frequency, and trip type. This information will also prove useful for transportation planners and policy-makers when considering the special travel needs of certain groups to create a user-friendly railway travel environment that promotes public use.     

Structure and dynamics of non-suburban passenger travel demand in Indian railways

In this paper we derive long run structural relationships for all the three classes, viz. upper, second and ordinary second class, of non-suburban long distance passenger transport demand for Indian railways using annual time series data for 1970–1995. We employ some of the recent developments in multivariate dynamic econometric time series modeling including estimation of long-run structural cointegrating relationships, short-run dynamics and measurement of the effects of shocks and their persistence on evolution of the dynamic passenger transport demand system. The models are estimated using a cointegrating vector autoregressive (VAR) modeling framework, which allows for endogeneity of regressors. The demand systems are found to be stable for all the classes in the long run and they converge to equilibrium in a period of around 2–4 years after a typical system-wide shock. Any disequilibrium in the short-run is corrected in the long-run with adjustments in passenger transport demand and the price variable, i.e. real rate charged per passenger kilometer. Results show that travel demand in all classes would rise with income, although the rise is less than proportionate in the case of ordinary class. High price elasticity in long-run and short-run impulse responses indicate that passenger fare hike could lead to substantial decline in travel demand leading to decline in revenue earnings of the railways. This revised version was published online in June 2006 with corrections to the Cover Date.     

Environmental analyses of land transportation systems in The Netherlands

Environmental analyses of the impact of transportation systems on the environment from the cradle to the grave are rare. This article makes a comparison of various Dutch passenger transportation systems by studying their complete life-cycle energy use. Moreover, systems are compared according to their use of space, costs and travel time. Although the results indicate that no one transportation system out performs others in all of the characteristics, in a multi-criteria analysis of four aspects, the train and bicycle emerge as superior options. This holds regardless of the travel distance considered. Interestingly, the train and bicycle are complementary systems, that together operate within a comprehensive distance range.     

Survey and empirical evaluation of nonhomogeneous arrival process models with taxi data

Arrival processes are important inputs to many transportation system functions, such as vehicle prepositioning, taxi dispatch, bus holding strategies, and dynamic pricing. We conduct a comprehensive survey of the literature which shows that many transport systems employ basic homogeneous arrival process models or static nonhomogeneous processes. We conduct an empirical experiment to compare five state of the art arrival process short term prediction models using a common transportation system data set: New York taxi passenger pickups in 2013. Pickup data is split between 672 observations for model estimation and 96 observations for validation. From our experiment, we obtain evidence to support a recent model called FM‐IntGARCH, which is able to combine the benefits of both time series models and discrete count processes. Using a set of seven performance metrics from the literature, FM‐IntGARCH is shown to outperform the offline models—seasonal factor method, piecewise linear model—as well as the online models—ARIMA, Gaussian Cox process. Implications for operating data‐driven “smart” transit systems and urban informatics are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Estimating link travel time functions for heterogeneous traffic flows on freeways

Oversized vehicles, such as trucks, significantly contribute to traffic delays on freeways. Heterogeneous traffic populations, that is, those consisting of multiple vehicles types, can exhibit more complicated travel behaviors in the operating speed and performance, depending on the traffic volume as well as the proportions of vehicle types. In order to estimate the component travel time functions for heterogeneous traffic flows on a freeway, this study develops a microscopic traffic‐simulation based four‐step method. A piecewise continuous function is proposed for each vehicle type and its parameters are estimated using the traffic data generated by a microscopic traffic simulation model. The illustrated experiments based on VISSIM model indicate that (i) in addition to traffic volume, traffic composition has significant influence on the travel time of vehicles and (ii) the respective estimations for travel time of heterogeneous flows could greatly improve their estimation accuracy. Copyright © 2016 John Wiley & Sons, Ltd.     

An aggregate demand model for intercity passenger travel in Sri Lanka

Inspite of the inherent weaknesses in aggregate demand models, they continue to be used in everyday applications, especially in developing countries. The largely data intensive disaggregate model preclude its application in many cases. This paper attempts the formulation and calibration of an aggregate total demand model for estimating inter-district passenger travel by public transport in Sri Lanka. In its process, an investigation is made of the common problems in the aggregate approach while examining possible remedial measures to improve the accuracy and (hence) the usability of the aggregate model. It is argued that commonly used variables and functional forms are inappropriate for making accurate estimates in developing countries. Consequently, the model calibration is shown to incorporate variables representing urbanisation, under-development, transfers, a mode-abstract cost function and intrinsic features. The necessity for functional form for each variable to be based on behavioral assumptions that are tested using the Box-Cox transformation for ensuring the best fit of the data is also observed. Although, the model form was calibrated for Sri Lanka, the model is generalised in order for its applications to other countries as well as, both, inter-district and intercity travel demand estimation.