共查询到19条相似文献,搜索用时 187 毫秒
1.
2.
本文分析了国内外物理法化学战剂监测仪器技术水平和发展趋势,系统介绍了离子迁移谱(IMS)检测技术的原理和发展,提出化学战剂检测仪器研制的关键技术和整机设计初步构想。 相似文献
3.
4.
海上的波浪观测资料统计表明,海上纯风浪和纯涌浪的出现机会比较少,大部分以混合浪形式出现,其频谱结构多为双峰甚至多峰。研究双峰谱波浪的模型表述和数值模拟技术,对三种典型的双峰谱海浪进行了数值模拟,仿真结果表明了双峰谱海浪数值模拟的有效性。 相似文献
5.
6.
7.
基于谱的海浪模拟与谱估计 总被引:1,自引:0,他引:1
针对掠海飞行器系统仿真的需要,研究了海浪仿真方法。选取P—M谱作为海浪谱,通过海况确定波谱参数,在波谱仿真带宽内采用频率等分法对其进行分割,根据Longuest—Higgins海浪模拟模型进行仿真,得出了海浪时域波形。并采用Welch法进行波谱估计,从波谱能量度量,仿真精确度达到了99.22%。 相似文献
8.
详细论述一种舰船非线性隔振装置物理和数学模型的建立过程,选用数值方法中的四阶变步长龙格库塔法对数学模型进行仿真计算,利用Mathematica软件实现算法;对解的谱特性做了仿真研究,并分析了谱特性.大量的谱分析表明,随着非线性作用的增强,依次出现奇数阶超谐波分岔,对称破缺分岔,次谐波分岔,次谐波分量也会发生超谐波分岔和次谐波分岔. 相似文献
9.
10.
11.
针对舰用空压机控制电路设计过程,提出基于LabVIEW软件平台的电路检测方法。为实现信号采集功能,设计数字信号输入、输出电路。该信号交互电路以电气元件为基本单元,通过对数字信号的放大、滤波,实现数字信号输人输出功能。该方法克服了传统方法对空压机控制电路全系统功能测试复杂的缺点,在实际生产活动中,可以更方便、快捷地对舰用空压机控制电路功能进行测试,从而锁定全系统电路出现故障的电路模块。经试验测试,该电路采集数字信号准确、快捷,测试程序可以与外部信号交互以实现全功能仿真测试,并且可替代部分实际电路进行功能测试,测试成果可用于研制实际电路模块及全系统的模拟调试。 相似文献
12.
介绍了某航空器液位加注过程中液位检测系统的软件设计。检测到的数据通过串口传至PC机,本系统对实时数据进行处理,将数据曲线在PC机界面上实时显示,并保存至数据库。文章重点介绍了实时数据处理软件滤波、参数显示等技术关键。 相似文献
13.
14.
15.
16.
桩基础能有效减少建筑物的沉降,提高建筑的安全性,因此桩基础在各类建筑中起着重要的作用,但是由于施工原因,可能导致桩出现缺陷,所以对桩缺陷的检测是必不可少的环节。针对传统的静压荷载试验,缺陷桩在被破坏的过程中位移计会发生变化,很难准确地测出缺陷的位置和形态。且其他一些缺陷桩检测的方法费用高,无法精确确定缺陷形态。本文提出一种新的缺陷桩检测方法——VIC-3D的数字散斑技术,对缺陷桩的缺陷位置及形态进行检测,了解缺陷部位的破坏过程。数字散斑相关方法是现代散斑光学技术与数字图像结合对缺陷桩进行全场三维变形测量,通过分析应变云图,可准确确定缺陷存在位置及形态以及其破坏过程。 相似文献
17.
18.
19.
Yutaka Masuyama Yusuke Tahara Toichi Fukasawa Naotoshi Maeda 《Journal of Marine Science and Technology》2009,14(2):137-160
A database of full-scale three-dimensional sail shapes is presented with the aerodynamic coefficients for the upwind condition
of International Measurement System (IMS) type sails. Three-dimensional shape data are used for the input of numerical calculations
and the results are compared with the measured sail performance. The sail shapes and performance were measured using sail
dynamometer boat Fujin. This is a boat of 10.3-m length overall in which load cells and CCD cameras were installed to simultaneously measure the
sail forces and shapes. At the same time, the sailing conditions of the boat, e.g., boat speed, heel angle, wind speed, and
wind angle, were measured. The sail configurations tested were: mainsail with 130% jib, mainsail with 75% jib, and mainsail
alone. Sail shapes were measured at several vertical positions for the shape parameters defined by: chord length, maximum
draft, maximum draft position, entry angle at the luff, and exit angle at the leech, all of which finally yield three-dimensional
coordinates of the sail geometry. The tabulated shape data, along with aerodynamic coefficients, are presented in this article.
In addition, numerical flow simulations were performed for the measured sail shapes and the sailing conditions to investigate
the capability and limitations of the methods through detailed comparison with the measurements. Two numerical methods were
used: a vortex lattice method (VLM) and a Reynolds-averaged Navier–Stokes (RANS)-based computational fluid dynamics method.
The sail shape database, in association with the numerical results, provides a good benchmark for the sail performance analysis
of the upwind condition of IMS type sails. 相似文献