共查询到19条相似文献,搜索用时 562 毫秒
1.
《航海》2015,(6)
在中国南海深海远洋的油气开发中大量采用了浮式生产储油船(FPSO)。比如"南海开拓"号、"南海睦宁"号、"南海胜利"号、"南海发现"号、"南海盛开"号、"海洋石油111"、"海洋石油115"、"海洋石油116"等都是典型的南海在役的FPSO。所有上述的FPSO都采用了内转塔式的单点系泊系统。典型的内转塔系泊系统由系泊锚点,锚腿和内转塔式浮筒三部分结构组成。目前南海FPSO系泊锚腿数量有6条和9条两种。锚腿的形式通常是钢缆和锚链的混合形式。在经过多年的运营之后,锚腿上往往会发生钢缆断丝,配重链或者配重块脱落等现象,锚腿的强度已经不再满足设计要求,所以需要进行锚腿钢缆和锚链的更换(维修)。本文以2014年文昌"南海奋进"FPSO单点系泊系统维修项目为对象,介绍单点系泊系统锚腿更换(维修)的基本方法,重点介绍工程中上钢缆和上锚链的回接技术。该种方法经过实践证明安全可靠高效,对以后类似的工程具有极好的借鉴意义。 相似文献
2.
3.
4.
5.
6.
中国船舶及海洋工程设计研究院 《船舶》2015,(4):135-136
<正>"海洋石油118"号FPSO是由中国船舶及海洋工程设计研究院(MARIC)、海洋石油工程股份有限公司设计,大连船舶重工集团有限公司建造的浮式生产储卸油装置,采用内转塔单点系泊系统,可抵御500年一遇台风环境,创国内FPSO设计之最。 相似文献
7.
利用水动力分析软件AQWA研究了内转塔式单点系泊参数对海上浮式生产储油船FPSO(floating production,storage and affcoading system)系统动力效应的影响特性,定量分析了内转塔位置、系泊缆材料分布、系泊缆预张力、系泊缆数量、系泊缆布置形式等参数对FPSO系统动力效应的影响,对每个系泊参数采取多个特征量进行比较分析,计算结果表明:转塔位置距船艏柱25%Lpp时风标效应及定位效果最好,多成分系泊缆材料分布采取下端钢链9%、聚酯缆90%、上端钢链1%时,系泊缆数量取9根且为3组×3根/组布置时定位效果最好,缆绳受力最小.以FPSO水平偏移量与系泊缆的安全系数为目标,提出了一套系泊系统的优选方案,计算结果表明系泊性能优良,与初步设计方案相比有了显著地提高.文中的计算及分析结果对内转塔式FPSO系泊系统的设计具有一定指导意义. 相似文献
8.
9.
《中国舰船研究》2015,(4)
内转塔式单点系泊系统在海洋石油装备中得到广泛应用。为研究该类型单点系泊系统的刚度特性,以我国南海一艘内转塔式单点系泊浮式生产储油设备(FPSO)的系泊系统为研究对象,采用浮体系泊分析软件Ariane分别建立单根系缆和系泊系统的静力分析模型,基于线弹性悬链线理论计算单根系缆和系泊系统的刚度,并重点针对吃水、系缆轴向拉伸刚度、系缆配重、系缆长度等参数进行系泊刚度敏感性分析,研究不同参数变化对系泊刚度的影响。结果表明:系泊刚度对系缆长度变化十分敏感;吃水和系缆长度主要通过影响系缆预张力来影响系泊刚度;系缆轴向拉伸刚度主要影响大位移条件下的系泊刚度;配重只影响一定位移范围内的系泊刚度。最后,给出了单点系泊系统设计的建议。 相似文献
10.
11.
海洋强国战略驱动下,深海油田的勘探与开发需要FPSO具备更强的系泊能力,其中转塔式单点系泊系统能够更好地保证作业安全。通过专利分析的方法,聚焦技术角度,梳理归纳了全球FPSO转塔领域的技术发展脉络。研究发现,目前转塔领域技术发展具有较强的阶段性。内转塔技术关注点主要为:转塔与锚泊、转塔与立管、转塔与浮筒、转塔与船体;外转塔的技术关注点主要为:外转塔的结构、安全性监测与防护。企业今后在内转塔方面应重点关注转塔结构和立管、锚链、浮筒、轴承之间的相关交叉技术,外转塔方面应更多关注高效作业的外转塔结构及其安全性。 相似文献
12.
随着FPSO在海洋石油开发中的广泛应用,以及其系泊技术逐步趋向成熟,各种系泊方式的应用和研究也相对比较深入。对不同系泊方式进行全面风险分析,相互比较,对于以后选择系泊系统形式和避免现有系泊系统的一些风险是非常重要。基于上述考虑,进行散射系泊方式与转塔式系泊方式的风险对比,乃是极其必要的。 相似文献
13.
14.
15.
16.
17.
18.
《舰船科学技术》2016,(Z1)
The frequent change in ice drift direction poses a significant challenge for turret moored ship in ice. Variability in ice drift is mainly caused by the winds and currents. To solve this problem, a new method with numerical simulation based on heading control is applied to reduce the risk of operation of The Arctic Tandem Offloading Terminal(ATOT),which includes an offloading icebreaker(OIB) moored to a submerged turret and a shuttle tanker moored at the stern of the OIB in this paper. An icebreaking tanker, MT Uikku, was modeled in a simulation program. Then the level ice load on the tanker was calculated with different ice thicknesses and drift speeds, after which a heading controller assisted with mooring system is used to simulate the horizontal motion of the tanker under the ice action. 相似文献
19.
In this article, we analyze the linear stability of tandem offloading systems in wind, current, and waves. The wind and current forces are evaluated with the help of published experimental data, while the hydrodynamic coefficients and wave drift forces are rigorously estimated by using a three-dimensional singularity distribution method based on potential theory. The bow hawser and mooring lines are described quasistatically by elastic catenary equations. In order to examine the linear static and dynamic stability of the system, the equations for surge, sway, and yaw are linearized. The effect of design parameters such as turret position, mooring stiffness, and hawser length and stiffness on stability is investigated based on linearized model. The stability analysis clarifies the mechanism of the limit cycle for tandem offloading systems, which is known as fishtailing motion. The theoretical results of the shape and amplitude of the limit cycle are found to be in good agreement with those of simulations and experiments. 相似文献