Sound wall barriers: Near roadway dispersion under neutrally stratified boundary layer

With the passage of California Senate Bill 375, which motivates infill development near transit hubs, there is the potential to increase vehicle congestion in residential communities and increase in human exposure to toxic mobile source pollutants. Among all the mitigation strategies that protect near roadway residents from health-affecting vehicular emissions (e.g. separating sensitive receptors from high traffic roadways), this paper discusses the impact of sound wall barriers (SBs) in reducing the air pollution exposure of nearby residents. To date, there have been some studies done to understand the impact of these structures on dispersion of vehicular emissions; however, no definitive conclusion has been drawn yet. The main objective of this paper is to provide more information and details on flow and dispersion affected by barriers through a systematic laboratory simulation of plume dispersion using a water channel. Three sets of experiments were conducted: (1) plume visualizations, (2) plume concentration measurements, and (3) flow velocity measurements. Results from this study shows that the deployment of sound barriers induces a recirculating flow over the roadway which transports the surface released emissions to the upwind side of the roadway, and then shifts the plume upward through an induced updraft motion. Plume visualizations clearly demonstrate that the presence of SBs induce significant vertical mixing and updraft motion on the roadway which increases the initial plume dilution and plume height and consequently results in reduced downwind ground level concentrations. Although different SB configurations result in different localized flow patterns, the dispersion pattern does not change significantly after several SB heights downwind of the roadway.     

Rural environment stakeholders and policy making: Willingness to pay to reduce road transportation pollution impact in the Western Pyrenees

In spite of the strategic national and regional development importance of transportation infrastructures, road transportation is one of the major sources of externalities worldwide. Using data collected from 900 residents living in 14 rural towns near the roads crossing the Spanish Pyrenees, we model citizens’ willingness-to-pay (WTP) to reduce noise and air pollution. We collect the data adopting a contingent valuation method (CVM) design and we analyze the data employing a Zero-Inflated Ordered Probit (ZIOP) model, which allows us to account for an excessive number of zero observations. Our results are in contrast with previous studies’ results with regard to environmental attitudes and socio-economic profiles of residents. Our findings indicate that the stakeholders living near major roads have higher incentives to offset environmental costs. Also, younger, better educated, and more environmentally-aware citizens are willing to pay more to reduce externalities, as they are influenced by their values and environmentally friendly sub-culture, possibly fostered during the past 30 years of green movement worldwide campaigning.     

Effect of road width and traffic volume on vehicular interactions in heterogeneous traffic

Highway traffic flow phenomena involve several complex and stochastic variables with high interdependencies. The variations in roadway, traffic and environmental factors influence the traffic flow quality significantly. Capacity analysis of road sections under different traffic and geometric conditions need to quantify the vehicles of widely varying characteristics to a common and universally acceptable unit. Passenger car unit (PCU) is the universally adopted unit of traffic volume, keeping the passenger car as the ‘standard vehicle’ with reference to its static and dynamic characteristics; other vehicles are expressed to its equivalent number in terms of PCUs. The studies carried out in this aspect represent the dynamic nature of impedance caused by a vehicle while moving through a traffic stream. The PCU values recommended by the Highway Capacity Manual are widely applied in many countries; however, their applicability is highly under debate because of the variations in prevailing local traffic conditions. There are several factors that influence the PCU values such as traffic, roadway, vehicle, environmental and control conditions, etc. Apart from vehicular characteristics, the other two major factors that influence the PCU of vehicles are the following: (i) road width and (ii) traffic volume. In this study, estimation of PCU values for the different types of vehicles of a highly heterogeneous traffic on 7.5‐ and 11.0‐m‐wide roads, using micro‐simulation technique, has been dealt with. It has been found that the PCU value of a vehicle type varies significantly with variation in road width and traffic volume. The results of the study indicate that the PCU values are significantly influenced by the said two factors. Copyright © 2012 John Wiley & Sons, Ltd.     

Linking an activity-based travel demand model with traffic emission and dispersion models: Transport’s contribution to air pollution in Toronto

This paper describes the development of an integrated approach for assessing ambient air quality and population exposure as a result of road passenger transportation in large urban areas. A microsimulation activity-based travel demand model for the Greater Toronto Area – the Travel Activity Scheduler for Household Agents – is extended with capabilities for modelling and mapping of traffic emissions and atmospheric dispersion. Hourly link-based emissions and zone-based soak emissions were estimated. In addition, hourly roadway emissions were dispersed at a high spatial resolution and the resulting ambient air concentrations were linked with individual time-activity patterns derived from the model to assess person-level daily exposure. The method results in an explicit representation of the temporal and spatial variation in emissions, ambient air quality, and population exposure.     

The influence of workplace environment on lung function of shopkeepers working near National Highway in Jalgaon: A note

The inferior ambient air quality was observed near highway passing through Jalgaon urban center. Among the pollutants critical level of particulates are observed at the roadside during May 2003 to April 2004. The shopkeepers working at the highway sides are at high risk of exposure to the air pollution caused by heavy highway traffic. The lung function test of the shopkeepers shows significant decrease in forced vital capacity, forced expiratory volume in one second and peak expiratory flow rate. The regular periodic health checkup and use of nose mask will protect the health of shopkeepers working near National Highway passing through Jalgaon urban center.     

Acceleration noise and level of service of urban roads - A case study

Capacity measurement of roads under mixed traffic conditions as prevailing in India is ambiguous as it varies with time, composition of traffic and roadway encroachments. High incidence of slow moving vehicles and tricycles adds to the problem. Volume - capacity ratio appears to be an inadequate measure of defining level of service under mixed traffic situations. An attempt is made in this paper to explore the possibility of presenting unconventional parameters like standard deviation of speed, co-efficient of variation of speed and acceleration noise as possible measures of level of service. Tentative ranges of acceleration noise are proposed in association with flow and speed to explain level of service of urban roads catering to mixed traffic. The results are based on a study conducted in Madras, a major metropolitan city of India.     

Temporal and spatial variation in allocating annual traffic activity across an urban region and implications for air quality assessments

Patterns of traffic activity, including changes in the volume and speed of vehicles, vary over time and across urban areas and can substantially affect vehicle emissions of air pollutants. Time-resolved activity at the street scale typically is derived using temporal allocation factors (TAFs) that allow the development of emissions inventories needed to predict concentrations of traffic-related air pollutants. This study examines the spatial and temporal variation of TAFs, and characterizes prediction errors resulting from their use. Methods are presented to estimate TAFs and their spatial and temporal variability and used to analyze total, commercial and non-commercial traffic in the Detroit, Michigan, U.S. metropolitan area. The variability of total volume estimates, quantified by the coefficient of variation (COV) representing the percentage departure from expected hourly volume, was 21%, 33%, 24% and 33% for weekdays, Saturdays, Sundays and holidays, respectively. Prediction errors mostly resulted from hour-to-hour variability on weekdays and Saturdays, and from day-to-day variability on Sundays and holidays. Spatial variability was limited across the study roads, most of which were large freeways. Commercial traffic had different temporal patterns and greater variability than non-commercial vehicle traffic, e.g., the weekday variability of hourly commercial volume was 28%. The results indicate that TAFs for a metropolitan region can provide reasonably accurate estimates of hourly vehicle volume on major roads. While vehicle volume is only one of many factors that govern on-road emission rates, air quality analyses would be strengthened by incorporating information regarding the uncertainty and variability of traffic activity.     

Roadway and traffic characteristics for bicycling

The promotion of bicycle transportation includes the provision of suitable infrastructure for cyclists. In order to determine if a road is suitable for bicycling or not, and what improvements need to be made to increase the level of service for bicycles on specific situations, it is important to know how cyclists perceive the characteristics that define the roadway environment. The present paper describes research developed to define which roadway and traffic characteristics are prioritized by users and potential users in the evaluation of quality of roads for bicycling in urban areas of Brazilian medium-sized cities. A focus group discussion identified 14 attributes representing characteristics that describe the quality of roads for bicycling in Brazilian cities. In addition, an attitude survey was applied with individuals to assess their perception on the attributes, along with the importance given to each one of them. The results were analyzed through the Method of Successive Intervals Analysis, which allows the transformation of categorical data into an interval scale. The analysis suggests that both the roadway and traffic characteristics related to segments and those related to intersections are important to the survey respondents. The five most important attributes, in their opinion, are: (1) lane width; (2) motor vehicle speed; (3) visibility at intersections; (4) presence of intersections; and (5) street trees (shading). Therefore, the research suggests that to promote bicycle use in Brazilian medium-sized cities, these attributes must be prioritized.     

Vehicular pollution prediction modelling: a review of highway dispersion models

Air quality modelling plays an important role in formulating air pollution control and management strategies by providing guidelines for better and more efficient air quality planning. Several line source models, mostly Gaussian‐based, have been suggested to predict pollutant concentrations near highways/roads. These models, despite several assumptions and limitations, are used throughout the world, including in India, to carry out air pollution prediction analysis due to vehicular traffic near roads/highways. These models are being continuously upgraded and modified based on field experiments, and numerical and physical modelling results. An effort has been made in the present paper to review briefly the philosophy and basic features of most of the commonly used highway dispersion models. The paper also discusses various theories and techniques that led to the development and modification of these models along with the statistical analysis tools to evaluate the performance of these models. An attempt has also been made to summarize briefly the various line source models currently used in India and to highlight the difficulties being faced while using them in an Indian context.     

Determinants of air cargo traffic in California

Studies on the economic impacts of air cargo traffic have been gaining traction in recent years. The slowed growth of air cargo traffic at California’s airports, however, has raised pressing questions about the determinants of air cargo traffic. Specifically, it would be useful to know how California’s air cargo traffic is affected by urban economic characteristics. Accordingly, this study estimates the socioeconomic determinants of air cargo traffic across cities in California. We construct a 7-year panel (2003–2009) using quarterly employment, wage, population, and traffic data for metro areas in the state. Our results reveal that the concentrations of both service and manufacturing employment impact the volume of outbound air cargo. Total air cargo traffic is found to grow faster than population, while the corresponding domestic traffic grows less than proportionally to city size. Wages play a significant role in determining both total and domestic air cargo movement. We provide point estimates for traffic diversion between cities, showing that 80% of air cargo traffic is diverted away from a small city located within 100 miles of a large one. Using socioeconomic and demographic forecasts prepared for California’s Department of Transportation, we also forecast metro-level total and domestic air cargo tonnage for the years 2010–2040. Our forecasts for this period indicate that California’s total (domestic) air cargo traffic will increase at an average rate of 5.9% (4.4%) per year.     

Reducing emissions at land border crossings through queue reduction and expedited security processing

Vehicle border crossings between Mexico and the United States generate significant amounts of air pollution, which can pose health threats to personnel at the ports of entry (POEs) as well as drivers, pedestrians, and local inhabitants. Although these health risks could be substantial, there is little previous work quantifying detailed emission profiles at POEs. Using the Mariposa POE in Nogales, Arizona as a case study, light-duty and heavy-duty vehicle emissions were analyzed with the objective of identifying effective emission reduction strategies such as inspection streamlining, physical infrastructure improvements, and fuel switching. Historical traffic information as well as field data were used to establish a simulation model of vehicle movement in VISSIM. Four simulation scenarios with varied congestion levels were considered to represent real-world seasonal changes in traffic volume. Four additional simulations captured varying levels of expedited processing procedures. The VISSIM output was analyzed using the EPA’s MOVES emission simulation software for conventional air pollutants. For the highest congestion scenario, which includes a 200% increase in vehicle volume, total emissions increase by around 460% for PM_2.5 and NO_x, and 540% for CO, SO₂, GHGs, and NMHC over uncongested conditions for a two-hour period. Expedited processing and queue reduction can reduce emissions in this highest congestion scenario by as much as 16% for PM_2.5, 18% for NO_x, 20% for NMHC, 7% for SO₂ and 15% for GHGs and CO. Other potential mitigation strategies examined include fleet upgrades, fuel switching, and fuel upgrades. Adoption of some or all of these changes would not only reduce emissions at the Mariposa POE, but would have air-quality benefits for nearby populations in both the US and Mexico. Fleet-level changes could have far-reaching improvements in air quality on both sides of the border.     

Effect of roadway network aggregation levels on modeling of traffic-induced emission inventories in Beirut

Traffic-induced emissions pose a serious threat to air quality in heavily congested urban centers. While air quality can be characterized through field measurements and continuous monitoring, forecasting future conditions depends largely on estimating vehicle-emission factors coupled with mathematical modeling. Traffic and environmental planners have relied on overall average network speed in conjunction with speed-based emission factor models to estimate traffic emissions. This paper investigates the effect of three levels of roadway network aggregation, macro-scale (overall network basis), meso-scale (roadway functional class basis) and micro-scale (link-by-link basis) on emission inventories. A traffic model and an emission factor model were integrated to determine total emissions in the future Beirut Central District area for these three modeling approaches.     

Exploring suitable traffic conditions for intermittent bus lanes

As one of the most promising bus priority techniques, the innovative intermittent bus lane (IBL) strategy has drawn more attention in the past few years. In this paper, some improvements on the operation of the IBL strategy are proposed, and two cellular automaton models for a roadway section with two lanes, one with no bus priority and the other with an intermittent bus lane, are built to study the characteristics of urban traffic flow. Computer simulations and analytical models are developed to conduct quantitative research on the influence of IBL on the traffic density distribution, traffic velocity, and traffic capacity of the roadway section. By comparing the average paces in the two cases, this paper proposes a methodology to determine suitable traffic conditions for the IBL strategy implementation. The results indicate that for the designed scenarios, the IBL strategy is effective only when the traffic density is in the range of 25 to 74 pcu/km, which suggests that level of service C is the inflection point for implementing the IBL strategy. Copyright © 2014 John Wiley & Sons, Ltd.     

Roadway determinants of bicyclist exposure to volatile organic compounds and carbon monoxide

Few studies have quantified relationships between bicyclist exposure to air pollution and roadway and traffic variables. As a result, transportation professionals are unable to easily estimate exposure differences among bicycle routes for network planning, design, and analysis. This paper estimates the effects of roadway and travel characteristics on bicyclist exposure concentrations, controlling for meteorology and background conditions. Concentrations of volatile organic compounds (VOC) and carbon monoxide (CO) are modeled using high-resolution data collected on-road. Results indicate that average daily traffic (ADT) provides a parsimonious way to characterize the impact of roadway characteristics on bicyclists’ exposure. VOC and CO exposure increase by approximately 2% per 1000 ADT, robust to different regression model specifications. Exposure on off-street facilities is higher than at a park, but lower than on-street riding – with the exception of a path through an industrial corridor with significantly higher exposure. VOC exposure is 20% higher near intersections. Traffic, roadway, and travel variables have more explanatory power in the VOC models than the CO model. The quantifications in this paper enable calculation of expected exposure differences among travel paths for planning and routing applications. The findings also have policy and design implications to reduce bicyclists’ exposure. Separation between bicyclists and motor vehicle traffic is a necessary but not sufficient condition to reduce exposure concentrations; off-street paths are not always low-exposure facilities.     

Traffic flooding the low countries: How the Dutch cope with motorway congestion

Motorway congestion is a common characteristic of the larger conurbations all over the world. Using the example of the Randstad region in The Netherlands, the causes and conditions for the growing congestion on main roads are presented and explained. From an international comparison it appears that the Randstad region is characterized by a relatively high density and high-access quality of its motorway network, giving rise to an extremely high level of usage. The Dutch policy of coping with the consequent congestion problems at the network design level is outlined, followed by a presentation of the dynamic traffic management approaches to these problems. Special attention is given to the so-called target group policy that aims at prioritizing specific user groups such as freight traffic and trucks. Finally, attention is given to the Dutch attempts to introduce congestion pricing as a means of tackling congestion.     

Characteristics of truck traffic in Singapore

This paper presents the results of a project conducted to study the characteristics of truck traffic in Singapore. Detailed traffic surveys recording counts of vehicles by axle-configuration were performed at 219 sites over a period of nearly two years. The surveys covered 5 different road classes, namely expressways, arterials, collectors, industrial roads and local roads. It was found that the time distribution of truck travel were not the same among the five road classes. The peaking characteristics of truck traffic were less pronounced compared to passenger car traffic. The peak hour truck volume varied from 67.0% to 9.7% of the daily truck traffic as compared to 13.8% for passenger car traffic. The lane distribution pattern of truck traffic was studied in detail by road class, and was found to be a function of total directional traffic volume, total directional truck volume and the number of traffic lanes. Composition analysis was also carried out to study the lane use characteristics of single- and multiple-unit trucks.     

Determinants of the willingness-to-pay for reducing the environmental impacts of road transportation

This paper examines the willingness-to-pay of people living in a number of villages in Navarre, in the Spanish Pyrenees to reduce noise and air pollution. Several models are used for estimation based on contingent valuation, noting that those living near roads are willing to pay more to reduce air and noise pollution. In addition, younger people, the better educated, and the more environmentally aware individuals are also willing to pay more to reduce those externalities.     

Child pedestrian fatalities: The size of the problem and some suggested countermeasures

The child pedestrian death rates, per 100,000 population, for the USA and 22 European countries are compared. The safety measures used in some of these countries, for the two key areas of danger for children, the school journey and the residential environment, are outlined. Problems that might prevent the introduction of these countermeasures in some other countries are discussed. It is recommended that: 1) there should be special low speed limits on the roads outside all schools. On minor roads traffic calming measures would be suitable, on main roads new speed limits could be introduced and enforced by police surveillance using video camera techniques. 2) In suitable residential areas children should be enabled to play out in safety on the streets near their homes. In some countries the most acceptable way of achieving this might be by a change in the law whereby children would have priority in these designated Home Zones.     

Assessment of air quality near traffic intersections in Bangalore city using air quality indices

Air quality indices are used for local and regional air quality management in many metro cities of the world. In the present study, air quality indices have been calculated using the US Environmental Protection Agency procedure to assess the status of ambient air quality near busy traffic intersections in Bangalore, India. The measured 24 h average criteria pollutants such as sulfur dioxide, oxides of nitrogen, respirable suspended particulate matter and suspended particulate matter for the period from 1997 to 2005 at three air quality monitoring stations are used for the development of AQIs. The result indicated that the air pollution at all the three air quality monitoring stations can be characterized as ‘good’ and ‘moderate’ for SO₂ and NO_x concentrations for all days from 1997 to 2004. Analysis of air quality indices values for both forms of suspended matter concentrations during 1999–2005 indicates 91% and 94% of the times days are in category ‘good’ and ‘moderate’. The yearly average air quality indices values of respirable suspended particulate matter and suspended particulate matter concentrations indicated decreasing trend and are coming under the category of ‘good’ and ‘moderate’ form the category of ‘poor’ and ‘very poor’.