The estimation of a time-dependent OD trip table with vehicle trajectory samples

Abstract

In this paper we discuss a dynamic origin–destination (OD) estimation problem that has been used for identifying time-dependent travel demand on a road network. Even though a dynamic OD table is an indispensable data input for executing a dynamic traffic assignment, it is difficult to construct using the conventional OD construction method such as the four-step model. For this reason, a direct estimation method based on field traffic data such as link traffic counts has been used. However, the method does not account for a logical relationship between a travel demand pattern and socioeconomic attributes. In addition, the OD estimation method cannot guarantee the reliability of estimated results since the OD estimation problem has a property named the ‘underdetermined problem.’ In order to overcome such a problem, the method developed in this paper makes use of vehicle trajectory samples with link traffic counts. The new method is applied to numerical examples and shows promising capability for identifying a temporal and spatial travel demand pattern.     

Modeling origin-destination uncertainty using network sensor and survey data and new approaches to robust control

This study develops new methods for network assessment and control by taking explicit account of demand variability and uncertainty using partial sensor and survey data while imposing equilibrium conditions during the data collection phase. The methods consist of rules for generating possible origin–destination (OD) matrices and the calculation of average and quantile network costs. The assessment methodology leads to improved decision-making in transport planning and operations and is used to develop management and control strategies that result in more robust network performance. Specific contributions in this work consist of: (a) Characterization of OD demand variability, specifically with or without equilibrium assumptions during data collection; (b) exhibiting the highly disconnected nature of OD space demonstrating that many current approaches to the problem of optimal control may be computationally intractable; (c) development of feasible Monte Carlo procedures for the generation of possible OD matrices used in an assessment of network performance; and (d) calculation of robust network controls, with state-of-the-art cost estimation, for the following strategies: Bayes, p-quantile and NBNQ (near-Bayes near-Quantile). All strategies involve the simultaneous calculation of controls and equilibrium conditions. A numerical example for a moderate sized network is presented where it is shown that robust controls can provide approx. 20% cost reduction.     

Estimating multi-year 24/7 origin-destination demand using high-granular multi-source traffic data

Dynamic origin-destination (OD) demand is central to transportation system modeling and analysis. The dynamic OD demand estimation problem (DODE) has been studied for decades, most of which solve the DODE problem on a typical day or several typical hours. There is a lack of methods that estimate high-resolution dynamic OD demand for a sequence of many consecutive days over several years (referred to as 24/7 OD in this research). Having multi-year 24/7 OD demand would allow a better understanding of characteristics of dynamic OD demands and their evolution/trends over the past few years, a critical input for modeling transportation system evolution and reliability. This paper presents a data-driven framework that estimates day-to-day dynamic OD using high-granular traffic counts and speed data collected over many years. The proposed framework statistically clusters daily traffic data into typical traffic patterns using t-Distributed Stochastic Neighbor Embedding (t-SNE) and k-means methods. A GPU-based stochastic projected gradient descent method is proposed to efficiently solve the multi-year 24/7 DODE problem. It is demonstrated that the new method efficiently estimates the 5-min dynamic OD demand for every single day from 2014 to 2016 on I-5 and SR-99 in the Sacramento region. The resultant multi-year 24/7 dynamic OD demand reveals the daily, weekly, monthly, seasonal and yearly change in travel demand in a region, implying intriguing demand characteristics over the years.     

On activity-based network design problems

This paper examines network design where OD demand is not known a priori, but is the subject of responses in household or user itinerary choices to infrastructure improvements. Using simple examples, we show that falsely assuming that household itineraries are not elastic can result in a lack in understanding of certain phenomena; e.g., increasing traffic even without increasing economic activity due to relaxing of space–time prism constraints, or worsening of utility despite infrastructure investments in cases where household objectives may conflict. An activity-based network design problem is proposed using the location routing problem (LRP) as inspiration. The bilevel formulation includes an upper level network design and shortest path problem while the lower level includes a set of disaggregate household itinerary optimization problems, posed as household activity pattern problem (HAPP) (or in the case with location choice, as generalized HAPP) models. As a bilevel problem with an NP-hard lower level problem, there is no algorithm for solving the model exactly. Simple numerical examples show optimality gaps of as much as 5% for a decomposition heuristic algorithm derived from the LRP. A large numerical case study based on Southern California data and setting suggest that even if infrastructure investments do not result in major changes in link investment decisions compared to a conventional model, the results provide much higher resolution temporal OD information to a decision maker. Whereas a conventional model would output the best set of links to invest given an assumed OD matrix, the proposed model can output the same best set of links, the same daily OD matrix, and a detailed temporal distribution of activity participation and travel from which changes in peak period OD patterns can be observed.     

Cellpath: Fusion of cellular and traffic sensor data for route flow estimation via convex optimization

A new convex optimization framework is developed for the route flow estimation problem from the fusion of vehicle count and cellular network data. The issue of highly underdetermined link flow based methods in transportation networks is investigated, then solved using the proposed concept of cellpaths for cellular network data. With this data-driven approach, our proposed approach is versatile: it is compatible with other data sources, and it is model agnostic and thus compatible with user equilibrium, system-optimum, Stackelberg concepts, and other models. Using a dimensionality reduction scheme, we design a projected gradient algorithm suitable for the proposed route flow estimation problem. The algorithm solves a block isotonic regression problem in the projection step in linear time. The accuracy, computational efficiency, and versatility of the proposed approach are validated on the I-210 corridor near Los Angeles, where we achieve 90% route flow accuracy with 1033 traffic sensors and 1000 cellular towers covering a large network of highways and arterials with more than 20,000 links. In contrast to long-term land use planning applications, we demonstrate the first system to our knowledge that can produce route-level flow estimates suitable for short time horizon prediction and control applications in traffic management. Our system is open source and available for validation and extension.     

The treatment of uncertainty in the dynamic origin–destination estimation problem using a fuzzy approach

Regardless of existing types of transportation and traffic model and their applications, the essential input to these models is travel demand, which is usually described using origin–destination (OD) matrices. Due to the high cost and time required for the direct development of such matrices, they are sometimes estimated indirectly from traffic measurements recorded from the transportation network. Based on an assumed demand profile, OD estimation problems can be categorized into static or dynamic groups. Dynamic OD demand provides valuable information on the within-day fluctuation of traffic, which can be employed to analyse congestion dissipation. In addition, OD estimates are essential inputs to dynamic traffic assignment (DTA) models. This study presents a fuzzy approach to dynamic OD estimation problems. The problems are approached using a two-level model in which demand is estimated in the upper level and the lower level performs DTA via traffic simulation. Using fuzzy rules and the fuzzy C-Mean clustering approach, the proposed method treats uncertainty in historical OD demand and observed link counts. The approach employs expert knowledge to model fitted link counts and to set boundaries for the optimization problem by defining functions in the fuzzification process. The same operation is performed on the simulation outputs, and the entire process enables different types of optimization algorithm to be employed. The Box-complex method is utilized as an optimization algorithm in the implementation of the approach. Empirical case studies are performed on two networks to evaluate the validity and accuracy of the approach. The study results for a synthetic network and a real network demonstrate the robust performance of the proposed method even when using low-quality historical demand data.     

Feasibility of estimating travel demand using geolocations of social media data

Transportation - Travel demand estimation, as represented by an origin–destination (OD) matrix, is essential for urban planning and management. Compared to data typically used in travel...     

A traffic flow simulator for network reliability assessment

This paper investigates the transportation network reliability based on the information provided by detectors installed on some links. A traffic flow simulator (TFS) model is formulated for assessing the network reliability (in terms of travel time reliability), in which the variation of perceived travel time error and the fluctuations of origin-destination (OD) demand are explicitly considered. On the basis of prior OD demand and partial updated detector data, the TFS can estimate the link flows for the whole network together with link/path travel times, and their variance and covariance. The travel time reliability by OD pair can also be assessed and the OD matrix can be updated simultaneously. A Monte Carlo based algorithm is developed to solve the TFS model. The application of the proposed TFS model is illustrated by a numerical example.     

Location configuration design for Dynamic Message Signs under stochastic incident and ATIS scenarios

This paper proposes a methodology for deploying permanent Dynamic Message Signs (DMS) in a vehicular traffic network. Of particular interest is the planning problem to optimize the number of DMS to deploy in conjunction with Advanced Traveler Information Systems (ATIS), operating and maintenance cost of DMS, and incident-related user cost under random traffic incident situations. The optimal DMS location design problem discussed herein is formulated as a two-stage stochastic program with recourse (SPR). A Tabu search algorithm combined with dynamic traffic simulation and assignment approaches are employed to solve this problem. A case study performed on the Fort-Worth, Texas network highlights the effectiveness of the proposed framework and illustrates the affect factors such as demand, network structure, DMS response rate, and incident characteristics have on the solution. The numerical results suggest that designing and deploying DMS and ATIS jointly is more cost-effective and efficient than the sequential build-out of the two from the system management perspective.     

Stability of transportation networks under adaptive routing policies

Growing concerns regarding urban congestion, and the recent explosion of mobile devices able to provide real-time information to traffic users have motivated increasing reliance on real-time route guidance for the online management of traffic networks. However, while the theory of traffic equilibria is very well-known, fewer results exist on the stability of such equilibria, especially in the context of adaptive routing policy. In this work, we consider the problem of characterizing the stability properties of traffic equilibria in the context of online adaptive route choice induced by GPS-based decision making. We first extend the recent framework of “Markovian Traffic Equilibria” (MTE), in which users update their route choice at each intersection of the road network based on traffic conditions, to the case of non-equilibrium conditions, while preserving consistency with known existence and uniqueness results on MTE. We then exhibit sufficient conditions on the network topology and the latency functions for those MTEs to be stable in the sense of Lyapunov for a single destination problem. For various more restricted classes of network topologies motivated by the observed properties of travel patterns in the Singapore network, under certain assumptions we prove local exponential stability of the MTE, and derive analytical results on the sensitivity of the characteristic time of convergence to network and traffic parameters. The results proposed in this work are illustrated and validated on synthetic toy problems as well as on the Singapore road network with real demand and traffic data.     

An artificial neural network approach for evaluating transportation network improvements

As demand increases over time, new links or improvements in existing links may be considered for increasing a network's capacity. The selection and timing of improvement projects is an especially challenging problem when the benefits or costs of those projects are interdependent. Most existing models neglect the interdependence of projects and their impacts during intermediate periods of a planning horizon, thus failing to identify the optimal improvement program. A multiperiod network design model is proposed to select the best combination of improvement projects and schedules. This model requires the evaluation of numerous network improvement alternatives in several time periods. To facilitate efficient solution methods for the network design model, an artificial neural network approach is proposed for estimating total travel times corresponding to various project selection and scheduling decisions. Efficient procedures for preparing an appropriate training data set and an artificial neural network for this application are discussed. The Calvert County highway system in southern Maryland is used to illustrate these procedures and the resulting performance.     

An empirical study of simulation-based dynamic traffic assignment procedures

Abstract

Under Intelligent Transportation Systems (ITS), real-time operations of traffic management measures depend on long-term planning results, such as the origin–destination (OD) trip distribution; however, results from current planning procedures are unable to provide fundamental data for dynamic analysis. In order to capture dynamic traffic characteristics, transportation planning models should play an important role to integrate basic data with real-time traffic management and control. In this paper, a heuristic algorithm is proposed to establish the linkage between daily OD trips and dynamic traffic assignment (DTA) procedures; thus results from transportation planning projects, in terms of daily OD trips, can be extended to estimate time-dependent OD trips. Field data from Taiwan are collected and applied in the calibration and validation processes. Dynamic Network Assignment-Simulation Model for Advanced Road Telematics (DYNASMART-P), a simulation-based DTA model, is applied to generate time-dependent flows. The results from the validation process show high agreement between actual flows from vehicle detectors (VDs) and simulated flows from DYNAMSART-P.     

An RFID-based inventory management framework for emergency relief operations

In the aftermath of super storm Sandy, a large region from North Carolina to Maine endured food shortages, power outages, and long lines at gas stations forced to ration fuel due to low supply and high demand. These issues were largely the result of the affected transportation network’s inability to effectively cope with random and highly dynamic changes, and a lack of available resources and suppliers who were capable of enacting adequate emergency response measures. These problems experienced during super storm Sandy further underscored the need for a robust emergency inventory management system, where planning policies can be integrated with real-time on-line inventory management strategies to keep track of fluctuations of vital commodities such as food, water, medicine, fuel and power supplies. Motivated by this important problem, this paper investigates a comprehensive feedback-based emergency management framework for disasters such as super storm Sandy that provides integration with an emerging intelligent transportation systems technology, namely Radio Frequency Identification Devices (RFID). Within this framework, the offline-planning problem is solved by the stochastic humanitarian inventory management approach; and the online modeling strategy includes the application of a continuous time model predictive control technique. After introducing the mathematical background, the proposed framework is discussed using case studies built based on super storm Sandy in order to understand the efficiency and practicality of this RFID-based methodology. Results suggest that the methodology can properly account for and react to the rapidly changing needs for vital supplies that occur during the emergency relief operations. Based on this approach, planners and decision makers can be aware of the time delay that can happen due to disaster-related disruptions and thus maintain a safe level of buffer for vital supplies.     

Evaluation of an existing bus network using a transit network optimisation model: a case study of the Hiroshima City Bus network

This study evaluates an existing bus network from the perspectives of passengers, operators, and overall system efficiency using the output of a previously developed transportation network optimisation model. This model is formulated as a bi-level optimisation problem with a transit assignment model as the lower problem. The upper problem is also formulated as bi-level optimisation problem to minimise costs for both passengers and operators, making it possible to evaluate the effects of reducing operator cost against passenger cost. A case study based on demand data for Hiroshima City confirms that the current bus network is close to the Pareto front, if the total costs to both passengers and operators are adopted as objective functions. However, the sensitivity analysis with regard to the OD pattern fluctuation indicates that passenger and operator costs in the current network are not always close to the Pareto front. Finally, the results suggests that, regardless of OD pattern fluctuation, reducing operator costs will increase passenger cost and increase inequity in service levels among passengers.     

Towards a generic benchmarking platform for origin–destination flows estimation/updating algorithms: Design,demonstration and validation

Estimation/updating of Origin–Destination (OD) flows and other traffic state parameters is a classical, widely adopted procedure in transport engineering, both in off-line and in on-line contexts. Notwithstanding numerous approaches proposed in the literature, there is still room for considerable improvements, also leveraging the unprecedented opportunity offered by information and communication technologies and big data. A key issue relates to the unobservability of OD flows in real networks – except from closed highway systems – thus leading to inherent difficulties in measuring performance of OD flows estimation/updating methods and algorithms. Starting from these premises, the paper proposes a common evaluation and benchmarking framework, providing a synthetic test bed, which enables implementation and comparison of OD estimation/updating algorithms and methodologies under “standardized” conditions. The framework, implemented in a platform available to interested parties upon request, has been flexibly designed and allows comparing a variety of approaches under various settings and conditions. Specifically, the structure and the key features of the framework are presented, along with a detailed experimental design for the application of different dynamic OD flow estimation algorithms. By way of example, applications to both off-line/planning and on-line algorithms are presented, together with a demonstration of the extensibility of the presented framework to accommodate additional data sources.     

Path flow estimator for planning applications in small communities

This paper presents an alternative planning framework to model and forecast network traffic for planning applications in small communities, where limited resources debilitate the development and applications of the conventional four-step travel demand forecasting model. The core idea is to use the Path Flow Estimator (PFE) to estimate current and forecast future traffic demand while taking into account of various field and planning data as modeling constraints. Specifically, two versions of PFE are developed: a base year PFE for estimating the current network traffic conditions using field data and planning data, if available, and a future year PFE for predicting future network traffic conditions using forecast planning data and the estimated base year origin–destination trip table as constraints. In the absence of travel survey data, the proposed method uses similar data (traffic counts and land use data) as a four-step model for model development and calibration. Since the Institute of Transportation Engineers (ITE) trip generation rates and Highway Capacity Manual (HCM) are both utilized in the modeling process, the analysis scope and results are consistent with those of common traffic impact studies and other short-range, localized transportation improvement programs. Solution algorithms are also developed to solve the two PFE models and integrated into a GIS-based software called Visual PFE. For proof of concept, two case studies in northern California are performed to demonstrate how the tool can be used in practice. The first case study is a small community of St. Helena, where the city’s planning department has neither an existing travel demand model nor the budget for developing a full four-step model. The second case study is in the city of Eureka, where there is a four-step model developed for the Humboldt County that can be used for comparison. The results show that the proposed approach is applicable for small communities with limited resources.     

Estimation of mean and covariance of peak hour origin–destination demands from day-to-day traffic counts

This paper proposes a generalized model to estimate the peak hour origin–destination (OD) traffic demand variation from day-to-day hourly traffic counts throughout the whole year. Different from the conventional OD estimation methods, the proposed modeling approach aims to estimate not only the mean but also the variation (in terms of covariance matrix) of the OD demands during the same peak hour periods due to day-to-day fluctuation over the whole year. For this purpose, this paper fully considers the first- and second-order statistical properties of the day-to-day hourly traffic count data so as to capture the stochastic characteristics of the OD demands. The proposed model is formulated as a bi-level optimization problem. In the upper-level problem, a weighted least squares method is used to estimate the mean and covariance matrix of the OD demands. In the lower-level problem, a reliability-based traffic assignment model is adopted to take account of travelers’ risk-taking path choice behaviors under OD demand variation. A heuristic iterative estimation-assignment algorithm is proposed for solving the bi-level optimization problem. Numerical examples are presented to illustrate the applications of the proposed model for assessment of network performance over the whole year.     

Robust identification of air traffic flow patterns in Metroplex terminal areas under demand uncertainty

Multi-Airport Systems (MAS), or Metroplexes, serve air traffic demand in cities with two or more airports. Due to the spatial proximity and operational interdependency of the airports, Metroplex airspaces are characterized by high complexity, and current system structures fail to provide satisfactory utilization of the available airspace resources. In order to support system-level design and management towards increased operational efficiency in such systems, an accurate depiction of major demand patterns is a prerequisite. This paper proposes a framework for the robust identification of significant air traffic flow patterns in Metroplex systems, which is aligned with the dynamic route service policy for the effective management of Metroplex operations. We first characterize deterministic demand through a spatio-temporal clustering algorithm that takes into account changes in the traffic flows over the planning horizon. Then, in order to handle uncertainties in the demand, a Distributionally Robust Optimization (DRO) approach is proposed, which takes into account demand variations and prediction errors in a robust way to ensure the reliability of the demand identification. The DRO-based approach is applied on pre-tactical (i.e. one-day planning) as well as operational levels (i.e. 2-h rolling horizon). The framework is applied to Time Based Flow Management (TBFM) data from the New York Metroplex. The framework and results are validated by Subject Matter Experts (SMEs).     

Network-based real option models

Building on earlier work to incorporate real option methodologies into network modeling, two models are proposed. The first is the network option design problem, which maximizes the expanded net present value of a network investment as a function of network design variables with the option to defer the committed design investment. The problem is shown to be a generalized version of the network design problem and the multi-period network design problem. A heuristic based on radial basis functions is used to solve the problem for continuous link expansion with congestion effects. The second model is a link investment deferral option set, which decomposes the network investment deferral option into individual, interacting link or project investments. This model is a project selection problem under uncertainty, where each link or project can be deferred such that the expanded net present value is maximized. The option is defined in such a way that a lower bound can be solved using an exact method based on multi-option least squares Monte Carlo simulation. Numerical tests are conducted with the classical Sioux Falls network and compared to earlier published results.     

Long-term planning for ring-radial urban rail transit networks

Extensive work exists on regular rail network planning. However, few studies exist on the planning and design of ring-radial rail transit systems. With more ring transit lines being planned and built in Asia, Europe and the America's, a detailed study on ring transit lines is timely. An analytical model to find the optimal number of radial lines in a city for any demand distribution is first introduced. Secondly, passenger route choice for different rail networks is analyzed, for a many-to-many Origin-Destination (OD) demand distribution, based on a total travel time cost per passenger basis. The routes considered are: (1) radial lines only; (2) ring line only or radial lines and ring line combined; or (3) direct access to a destination without using the rail system. Mathematica and Matlab are used to code the route choice model. A cost-benefit optimization model to identify the feasibility and optimality of a ring line is proposed. Unlike simulations and agent-based models, this model is shown to be easily transferable to many ring-radial transit networks. The City of Calgary is used as an example to illustrate the applicability of each model. The existing urban rail network and trip distribution are major influencing factors in judging the feasibility and optimal location of the ring line. This study shows the potential net benefit of introducing a ring line by assessing changes in passengers’ costs. The changes in passenger cost parameters, such as ride cost and access cost, are shown to greatly influence the feasibility of a ring line.