共查询到20条相似文献,搜索用时 125 毫秒
1.
对不确定性汽车故障进行了分析,运用模糊数学理论建立了故障模糊矩阵,并对故障现象作出了深入的刻划,给出了一个理想故障模式,在此基础上,用模式识别方法对故障进行了诊断。 相似文献
2.
液压转向系统冷启动沉故障在北方冬季是比较常见的一个故障,论文针对故障产生的机理进行了深入分析,并对产生故障的常见原因及改进方法进行了简单介绍,最后对如何确定故障源从测试方面提供了方法。 相似文献
3.
对发动机点火系统的各种波形 ,包括标准波形、故障波形等进行了详细分析 ,阐明了由发动机故障分析仪采集到点火波形后 ,如何进行发动机故障部位及故障程度的诊断 相似文献
4.
5.
阐述了利用示波器对柴油发动机喷油系进行故障检测的基本原理,介绍了检测方法,并对几种典型的故障波形进行了故障诊断。 相似文献
6.
利用故障树分析法对CAN总线控制的中央门锁故障进行诊断,建立了故障树,采用Fussed法求最小割集来进行故障定性分析。 相似文献
7.
8.
为切实保证汽车发动机安全平稳运行,最大限度地满足人们基本的出行安全要求,促进我国汽车故障检测领域的全面健康发展,对汽车发动机的故障特征与检测技术进行了分析与研究。首先对汽车发动机进行综述,其次对汽车发动机检测技术进行分析,并对汽车发动机故障特征进行解析,最后对汽车发动机故障检测技术的类型进行分析,并通过案例进行了研究。 相似文献
9.
分别对电力线路接地故障、短路故障、雷击故障以及超负荷故障的现象以及发生的主要原因进行了分析。结合电力线路故障检修的实际经验,分别提出了对应的检修技术方法,对提高电力线路的故障处理水平,保证电力线路稳定运行具有重要作用。 相似文献
10.
别克轿车发动机在使用过程中若出现故障,应首先进行故障诊断并提取故障码,对有故障代码的故障可按故障代码表指示的故障部位进行检查与诊断,对无故障代码但有故障症状的故障,可按故障症状进行诊断。该发动机常见的故障症状为发动机起动困难、怠速不稳、喘振、断火或缺火、回火、爆震、功率不足及燃油经济性不良等。阐述了以上故障症状与故障诊断。 相似文献
11.
12.
13.
Masuru Sugai Hiroyuki Yamaguchi Masanori Miyashita Takaji Umeno Katsuhiro Asano 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1999,32(4):299-312
In this paper, we propose a new control strategy for an antilock braking system (ABS) to maintain the braking force at maximum. The popularization of the ABS that prevents the wheels from locking has resulted in an improvement of the vehicle stability and shortening of the braking distance. Further improvement is anticipated if the maximization of the braking force is realized. We found an interesting phenomenon in which the characteristics of the resonance system composed of the vehicle body and the wheel and road surface reflects the slip condition of the road surface. Using this phenomenon, we realized a control method for maintaining the maximum value of the braking force. 相似文献
14.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4-5):299-312
In this paper, we propose a new control strategy for an antilock braking system (ABS) to maintain the braking force at maximum. The popularization of the ABS that prevents the wheels from locking has resulted in an improvement of the vehicle stability and shortening of the braking distance. Further improvement is anticipated if the maximization of the braking force is realized. We found an interesting phenomenon in which the characteristics of the resonance system composed of the vehicle body and the wheel and road surface reflects the slip condition of the road surface. Using this phenomenon, we realized a control method for maintaining the maximum value of the braking force. 相似文献
15.
16.
山区公路填方路基不均匀沉降特征及其表现形式研究 总被引:1,自引:1,他引:0
填方路基的不均匀沉降不但会导致路基本身损坏,还将导致路面结构损坏。通过调查分析和研究,总结路基不均匀沉降特征及其表现形式,使之对此有更明确和更科学的认识。 相似文献
17.
冷再生沥青混合料在常温下摊铺和碾压,空隙率较大,性能方面不能达到热拌沥青混合料(HMA)的标准,一般被用在路面结构中的基层或下面层中,其上还须加铺一定厚度的HMA以满足道路使用的要求。在冷再生层上摊铺HMA时,HMA高达150~170℃的高温,会将冷再生层加热,加之施工机械和车辆荷载等作用,致使冷再生层会被进一步压实,称之为冷再生层的“第2次压实”过程。对现场冷再生层钻芯取样后发现,摊铺HMA前后的冷再生芯样的空隙率相差可达3%。现有冷再生混合料设计方法对这一现象并未考虑,导致冷再生层在实际施工过程中出现了严重的压密性车辙。提出在进行冷再生混合料设计时,应该考虑不同施工季节以及第2次压密过程的影响,并对现有试验方法进行了必要的改进。 相似文献
18.
19.