Valuing crowding in public transport: Implications for cost-benefit analysis

This paper investigates the valuation of crowding in public transport trips and its implications in demand estimation and cost-benefit analysis. We use a choice-based stated preference survey where crowding levels are represented by means of specially designed pictures, and use these data to estimate flexible discrete choice models. We assume that the disutility associated with travelling under crowded conditions is proportional to travel time. Our results are consistent with and extend previous findings in the literature: passenger density has a significant effect on the utility of travelling by public transport; in fact, the marginal disutility of travel time in a crowded vehicle (6 standing-passengers/m²) is 2.5 times higher than in a vehicle with available seats. We also compare the effects of different policies for improving bus operations, and the effect of adding crowding valuation in cost-benefit analysis. In doing that, we endogenise the crowding level as the result of the equilibrium between demand and supplied bus capacity. Our results indicate that important benefits may be accrued from policies designed to reduce crowding, and that ignoring crowding effects significantly overestimate the bus travel demand the benefits associated with pure travel time reductions.     

Evaluating critical lines and stations considering the impact of the consequence using transit assignment model ‐case study of London's underground network

As the problem of full transit vehicles is encountered daily by passengers in most of the big cities, previous research evaluated the consequence of overcrowding in terms of on‐board crowding and passengers not being able to board with full vehicles. The impact of overcrowding in the real world is, however, not necessarily proportional to these numbers. This paper attempts to specify the critical lines and stations of a network by considering the number of passengers failing to board and attempting to evaluate its impact on service quality and safety risks. The hypothesis is that larger stations with wider platforms can often cope better with overcrowding than smaller stations. Therefore a station size dependent satisfaction function is proposed, which takes values from 0 to 1. The method is applied to London's underground network with a number of scenarios which show critical stations in the network if delays occur.     

Design of public transit network in urban area with elastic demand

This research focuses on an efficient design of transit network in urban areas. The system developed is used to create, analyze and optimize routes and frequencies of transit system in the network level. The analysis is based on elastic demand, so the shift of demand between modes in network due to different service level is of prime consideration. The developed system creates all feasible routes connecting all pairs of terminals in the network. Out of this vast pool of routes, a set of optimal routes is generated for a certain predetermined number that maintains connectivity of significant demand. Based on these generated routes, the system fulfils transportation demand by assigning demand that considers path and route choices for non-transit users and transit users. Together with the assignment of demand, transit frequencies are optimized and the related fleet-size is calculated. Having an optimal setting of solution, the system is continued by reconnecting the routes to find some other better solutions in the periphery of the optimal setting. A set of mathematical programming modules is developed. Real data from Sioux Falls city network is used to evaluate the performance of the model and compare with other heuristic methods.     

Crowding in public transport systems: Effects on users,operation and implications for the estimation of demand

The effects of high passenger density at bus stops, at rail stations, inside buses and trains are diverse. This paper examines the multiple dimensions of passenger crowding related to public transport demand, supply and operations, including effects on operating speed, waiting time, travel time reliability, passengers’ wellbeing, valuation of waiting and in-vehicle time savings, route and bus choice, and optimal levels of frequency, vehicle size and fare. Secondly, crowding externalities are estimated for rail and bus services in Sydney, in order to show the impact of crowding on the estimated value of in-vehicle time savings and demand prediction. Using Multinomial Logit (MNL) and Error Components (EC) models, we show that alternative assumptions concerning the threshold load factor that triggers a crowding externality effect do have an influence on the value of travel time (VTTS) for low occupancy levels (all passengers sitting); however, for high occupancy levels, alternative crowding models estimate similar VTTS. Importantly, if demand for a public transport service is estimated without explicit consideration of crowding as a source of disutility for passengers, demand will be overestimated if the service is designed to have a number of standees beyond a threshold, as analytically shown using a MNL choice model. More research is needed to explore if these findings hold with more complex choice models and in other contexts.     

Does crowding affect the path choice of metro passengers?

This paper investigates crowding effect on the path choice of metro passengers. We show people reroute not only to avoid the delay from crowding but also to evade crowding itself. More specifically, a logit model fits best when it uses the transit delay from crowding as well as the passenger load of a connection in addition to the conventional explanatory variables. Also, we demonstrate that crowding decreases the overall welfare of metro passengers. The model is tested on the real path choice data acquired by the recent algorithm by Hong et al. (2015) known to detect the real path choice from Smart Card data in more than 90% of the cases.     

Performance indicators for public transit connectivity in multi-modal transportation networks

Connectivity plays a crucial role as agencies at the federal and state level focus on expanding the public transit system to meet the demands of a multimodal transportation system. Transit agencies have a need to explore mechanisms to improve connectivity by improving transit service. This requires a systemic approach to develop measures that can prioritize the allocation of funding to locations that provide greater connectivity, or in some cases direct funding towards underperforming areas. The concept of connectivity is well documented in social network literature and to some extent, transportation engineering literature. However, connectivity measures have limited capability to analyze multi-modal public transportation systems which are much more complex in nature than highway networks.In this paper, we propose measures to determine connectivity from a graph theoretical approach for all levels of transit service coverage integrating routes, schedules, socio-economic, demographic and spatial activity patterns. The objective of using connectivity as an indicator is to quantify and evaluate transit service in terms of prioritizing transit locations for funding; providing service delivery strategies, especially for areas with large multi-jurisdictional, multi-modal transit networks; providing an indicator of multi-level transit capacity for planning purposes; assessing the effectiveness and efficiency for node/stop prioritization; and making a user friendly tool to determine locations with highest connectivity while choosing transit as a mode of travel. An example problem shows how the graph theoretical approach can be used as a tool to incorporate transit specific variables in the indicator formulations and compares the advantage of the proposed approach compared to its previous counterparts. Then the proposed framework is applied to the comprehensive transit network in the Washington–Baltimore region. The proposed analysis offers reliable indicators that can be used as tools for determining the transit connectivity of a multimodal transportation network.     

Impact of ITS measures on public transport: A Case study

Intelligent Transport Systems (ITS) have a wide range of applications. They range from the more traditional signal coordination system to concepts such as smart cars and smart roads. This paper describes transit‐based ITS measures in Singapore. The island‐state has plans to double the current 90 km rail network over the next ten years and has also implemented or committed to implement many ITS initiatives that impact upon the public transport systems. The aim of these investments is to achieve a high transit modal share using a comprehensive transit network. ITS measures that can promote this aim include: automatic vehicle location systems for buses and taxis, integrated transit fare systems using contactless smart cards, rail information systems, multi‐modal travel guides on Internet and electronic road pricing. The potential impacts of these measures are delay reduction, more comfort, productivity gain and better network accessibility. ITS measures do not necessarily add physical capacity to a public transport system but are excellent supporting measures to encourage the modal shift to transit, particularly if a quality transit system is already in place.     

Mitigation of disruptions in public transit by Bee Colony Optimization

Dispatchers in many public transit companies face the daily problem of assigning available buses to bus routes under conditions of bus shortages. In addition to this, weather conditions, crew absenteeism, traffic accidents, traffic congestion and other factors lead to disturbances of the planned schedule. We propose the Bee Colony Optimization (BCO) algorithm for mitigation of bus schedule disturbances. The developed model takes care of interests of the transit operator and passengers. The model reassigns available buses to bus routes and, if it is allowed, the model simultaneously changes the transportation network topology (it shortens some of the planned bus routes) and reassigns available buses to a new set of bus routes. The model is tested on the network of Rivera (Uruguay). Results obtained show that the proposed algorithm can significantly mitigate disruptions.     

Impact assessment of the Internet of Things on feeder transit performance

ABSTRACT

Efficient planning for demand responsive transit (DRT) can contribute to fulfilling the first/last mile transport needs for users of a major transit line. With the advancement in communication technologies, the internet is expected to assist this growing need of providing first/last mile connectivity. This is proposed to be achieved through a network created by Internet of Things (IoT). This paper evaluates the effect of implementation of IoT on service quality (or disutility) of DRT for two scenarios – with enabled-IoT (e-IoT) and with disabled-IoT (d-IoT). Data from five different DRT-like systems known as Call-n-Ride (CnR) routes operating in Denver, Colorado, are used for evaluation purposes. These CnR routes are Meridian, Interlocken, South Inverness, Broomfield and Louisville. Results show that, in general, all CnR routes would experience more than a 58 percent decrease in disutility if their operations were based on ‘with e-IoT’ operations. Interlocken would record the largest percentage decrease (74 percent) in disutility if its route service switched from the ‘with d-IoT’ to the ‘with e-IoT’ scenario.     

Modelling public transport on‐board congestion: comparing schedule‐based and agent‐based assignment approaches and their implications

Transit systems are subject to congestion that influences system performance and level of service. The evaluation of measures to relieve congestion requires models that can capture their network effects and passengers' adaptation. In particular, on‐board congestion leads to an increase of crowding discomfort and denied boarding and a decrease in service reliability. This study performs a systematic comparison of alternative approaches to modelling on‐board congestion in transit networks. In particular, the congestion‐related functionalities of a schedule‐based model and an agent‐based transit assignment model are investigated, by comparing VISUM and BusMezzo, respectively. The theoretical background, modelling principles and implementation details of the alternative models are examined and demonstrated by testing various operational scenarios for an example network. The results suggest that differences in modelling passenger arrival process, choice‐set generation and route choice model yield systematically different passenger loads. The schedule‐based model is insensitive to a uniform increase in demand or decrease in capacity when caused by either vehicle capacity or service frequency reduction. In contrast, nominal travel times increase in the agent‐based model as demand increases or capacity decreases. The marginal increase in travel time increases as the network becomes more saturated. Whilst none of the existing models capture the full range of congestion effects and related behavioural responses, existing models can support different planning decisions. Copyright © 2016 John Wiley & Sons, Ltd.     

On seat capacity in traffic assignment to a transit network

Seating or standing make distinct on‐board states to a transit rider, yielding distinct discomfort costs, with potential influence on the passenger route choice onto the transit network. The paper provides a transit assignment model that captures the seating capacity and its occupancy along any transit route. The main assumptions pertain to: the seat capacity by service route, selfish user behaviour, a seat allocation process with priority rules among the riders, according to their prior state either on‐board or at boarding. To each transit leg from access to egress station is associated a set of ‘service modes’, among which the riders are assigned in a probabilistic way, conditionally on their priority status and the ratio between the available capacity and the flow of them. Thus the leg cost is a random variable, with mean value to be included in the trip disutility. Computationally efficient algorithms are provided for, respectively, loading the leg flows and evaluating the leg costs along a transit line. At the network level, a hyperpath formulation is provided for supply‐demand equilibrium, together with a property of existence and an method of successive averages equilibration algorithm. It is shown that multiple equilibria may arise. Copyright © 2010 John Wiley & Sons, Ltd.     

A dynamic stochastic model for evaluating congestion and crowding effects in transit systems

One of the most common motivations for public transport investments is to reduce congestion and increase capacity. Public transport congestion leads to crowding discomfort, denied boardings and lower service reliability. However, transit assignment models and appraisal methodologies usually do not account for the dynamics of public transport congestion and crowding and thus potentially underestimate the related benefits.This study develops a method to capture the benefits of increased capacity by using a dynamic and stochastic transit assignment model. Using an agent-based public transport simulation model, we dynamically model the evolution of network reliability and on-board crowding. The model is embedded in a comprehensive framework for project appraisal.A case study of a metro extension that partially replaces an overloaded bus network in Stockholm demonstrates that congestion effects may account for a substantial share of the expected benefits. A cost-benefit analysis based on a conventional static model will miss more than a third of the benefits. This suggests that failure to represent dynamic congestion effects may substantially underestimate the benefits of projects, especially if they are primarily intended to increase capacity rather than to reduce travel times.     

Estimation of origin‐destination matrices for a multimodal public transit network

This paper presents a procedure for the estimation of origin‐destination (O‐D) matrices for a multimodal public transit network. The system consists of a number of favored public transit modes that are obtained from a modal split process in a traditional four‐step transportation model. The demand of each favored mode is assigned to the multimodal network, which is comprised of a set of connected links of different public transit modes. An entropy maximization procedure is proposed to simultaneously estimate the O‐D demand matrices of all favored modes, which are consistent with target data sets such as the boarding counts and line segment flows that are observed directly in the network. A case study of the Hong Kong multimodal transit network is used to demonstrate the effectiveness of the proposed methodology.     

An integrated Bayesian approach for passenger flow assignment in metro networks

This paper proposes an integrated Bayesian statistical inference framework to characterize passenger flow assignment model in a complex metro network. In doing so, we combine network cost attribute estimation and passenger route choice modeling using Bayesian inference. We build the posterior density by taking the likelihood of observing passenger travel times provided by smart card data and our prior knowledge about the studied metro network. Given the high-dimensional nature of parameters in this framework, we apply the variable-at-a-time Metropolis sampling algorithm to estimate the mean and Bayesian confidence interval for each parameter in turn. As a numerical example, this integrated approach is applied on the metro network in Singapore. Our result shows that link travel time exhibits a considerable coefficient of variation about 0.17, suggesting that travel time reliability is of high importance to metro operation. The estimation of route choice parameters conforms with previous survey-based studies, showing that the disutility of transfer time is about twice of that of in-vehicle travel time in Singapore metro system.     

Policy analysis of third party electronic coupons for public transit fares

Mobile technologies are generating new business models for urban transport systems, as is evident from recent startups cropping up from the private sector. Public transport systems can make more use of mobile technologies than just for measuring system performance, improving boarding times, or for analyzing travel patterns. A new transaction model is proposed for public transport systems where travelers are allowed to pre-book their fares and trade that demand information to private firms. In this public-private partnership model, fare revenue management is outsourced to third party private firms such as big box retail or large planned events (such as sports stadiums and theme parks), who can issue electronic coupons to travelers to subsidize their fares. This e-coupon pricing model is analyzed using marginal cost theory for the transit service and shown to be quite effective for monopolistic coupon rights, particularly for demand responsive transit systems that feature high cost fares, non-commute travel purposes, and a closed access system with existing pre-booking requirements. However, oligopolistic scenarios analyzed using game theory and network economics suggest that public transport agencies need to take extreme care in planning and implementing such a policy. Otherwise, they risk pushing an equivalent tax on private firms or disrupting the urban economy and real estate values while increasing ridership.     

Network equilibrium for congested multi‐mode networks with elastic demand

This paper proposes an elastic demand network equilibrium model for networks with transit and walking modes. In Hong Kong, the multi‐mode transit system services over 90% of the total journeys and the demand on it is continuously increasing. Transit and walking modes are related to each other as transit passengers have to walk to and from transit stops. In this paper, the multi‐mode elastic‐demand network equilibrium problem is formulated as a variational inequality problem where the combined mode and route choices are modeled in a hierarchical logit structures and the total travel demand for each origin‐destination pair is explicitly given by an elastic demand function. In addition, the capacity constraint for transit vehicles and the effects of bi‐directional flows on walkways are considered in the proposed model. All these congestion effects are taken into account for modeling the travel choices. A solution algorithm is developed to solve the multi‐mode elastic‐demand network equilibrium model. It is based on a Block Gauss‐Seidel decomposition approach coupled with the method of successive averages. A numerical example is used to illustrate the application of the proposed model and solution algorithm.     

Transit-network design methodology for actual-size road networks

The main purpose of this study is to design a transit network of routes for handling actual-size road networks. This transit-network design problem is known to be complex and cumbersome. Thus, a heuristic methodology is proposed, taking into account the major concerns of transit authorities such as budget constraints, level-of-service standards and the attractiveness of the transit routes. In addition, this approach considers other important aspects of the problem including categorization of stops, multiclass of transit vehicles, hierarchy planning, system capacity (which has been largely ignored in past studies) and the integration between route-design and frequency-setting analyses. The process developed starts with the construction of a set of potential stops using a clustering concept. Then, by the use of Newton gravity theory and a special shortest-path procedure, a set of candidate routes is formed, categorized by hierarchy (mass, feeder, local routes). In the last step of the process a metaheuristic search engine is launched over the candidate routes, incorporating budgetary constraints, until a good solution is found. The algorithm was tested on the actual-size transit network of the city of Winnipeg; the results show that under the same conditions (budget and constraints) the proposed set of routes resulted in a reduction of 14% of total travel time compared to the existing transit network. In addition the methodology developed is compared favorably with other studies using the transit network of Mandl benchmark. The generality of the methodology was tested on the recent real dataset (pertaining to the year 2010) of the larger city of Chicago, in which a more efficient and optimized scheme was proposed for the existing rail system.     

Including passengers’ response to crowding in the Dutch national train passenger assignment model

Transit passengers’ response to crowded conditions has been studied empirically, yet is limitedly included in transport models currently used in the design of policy and infrastructure investments. This has consequences for the practical applicability of these models in studies on, for instance, timetabling, train capacity management strategies, project appraisal, and passenger satisfaction. Here we propose four methods to include the effect of crowding, based on existing studies on passengers’ perception and response as well as often-used crowding indicators. These four alternative methods are implemented in the train passenger assignment procedure of the Dutch national transport model, and evaluated with respect to their impacts on the model results for the Dutch railway network. The four methods relate to four different ways in which an additive trip penalty and/or time-multiplier can be incorporated in the train utility function for different travel purposes, to capture the disutility of crowding as measured by the load factor. The analyses of the test case favor the hybrid method using both a boarding penalty (capturing seat availability upon boarding) and a time-multiplier (capturing physical comfort and safety throughout the trip). This method produces consistent results, while the additional computational effort that it imposes is acceptable. Further empirical underpinning is needed to conclusively show which of these methods best captures passengers’ response behavior quantitatively (for different travel purposes and conditions).     

Accounting for travel time variability in the optimal pricing of cars and buses

A number of studies have shown that in addition to travel time and cost as the common influences on mode, route and departure time choices, travel time variability plays an increasingly important role, especially in the presence of traffic congestion on roads and crowding on public transport. The dominant focus of modelling and implementation of optimal pricing that incorporates trip time variability has been in the context of road pricing for cars. The main objective of this paper is to introduce a non-trivial extension to the existing literature on optimal pricing in a multimodal setting, building in the role of travel time variability as a source of disutility for car and bus users. We estimate the effect of variability in travel time and bus headway on optimal prices (i.e., tolls for cars and fares for buses) and optimal bus capacity (i.e., frequencies and size) accounting for crowding on buses, under a social welfare maximisation framework. Travel time variability is included by adopting the well-known mean–variance model, using an empirical relationship between the mean and standard deviation of travel times. We illustrate our model with an application to a highly congested corridor with cars, buses and walking as travel alternatives in Sydney, Australia. There are three main findings that have immediate policy implications: (i) including travel time variability results in higher optimal car tolls and substantial increases in toll revenue, while optimal bus fares remain almost unchanged; (ii) when bus headways are variable, the inclusion of travel time variability as a source of disutility for users yields higher optimal bus frequencies; and (iii) including both travel time variability and crowding discomfort leads to higher optimal bus sizes.     

The allocation of buses in heavily utilized networks with overlapping routes

Many transit systems outside North America are characterized by networks with extensively overlapping routes and buses frequently operating at, or close to, capacity. This paper addresses the problem of allocating a fleet of buses between routes in this type of system; a problem that must be solved recurrently by transit planners. A formulation of the problem is developed which recognizes passenger route choice behavior, and seeks to minimize a function of passenger wait time and bus crowding subject to constraints on the number of buses available and the provision of enough capacity on each route to carry all passengers who would select it. An algorithm is developed based on the decomposition of the problem into base allocation and surplus allocation components. The base allocation identifies a feasible solution using an (approx.) minimum number of buses. The surplus allocation is illustrated for the simple objective of minimizing the maximum crowding level on any route. The bus allocation procedure developed in this paper has been applied to part of the Cairo bus system in a completely manual procedure, and is proposed to be the central element of a short-range bus service planning process for that city.