Traffic Noise in Europe: A Comparison of Calculation Methods,Noise Indices and Noise Standards for Road and Railroad Traffic in Europe

The demand for inland freight transport in Europe is mainly met by road transport, leading to unsustainable impacts such as air pollution, greenhouse gas emissions and congestion. Since rail transport has lower externalities than road transport, a modal shift from road to rail is an accepted policy goal for achieving a more sustainable and competitive transport system. However, intermodal road–rail transport is mainly competitive for long-distance transport, and as a consequence, the potential for modal shift is limited. The cost efficiency of road–rail intermodal transport is particularly sensitive to pre- and post-haulage (PPH) costs, since this activity typically has a larger cost compared with its share of the total distance in the transport chain. For intermodal transportation over shorter distances, for example, below 300 km and where there are substantial PPH activities at both ends of the chain, the competitiveness of the intermodal transport system compared with that of direct road is low. Improving the efficiency of PPH activities is, therefore, of utmost importance for the competitiveness of the intermodal transport system. This paper looks into the issue of improving the cost efficiency of an intermodal transport chain by implementing an innovative and flexible legal framework regarding the PPH activities in the chain. By extending the legal framework with exemptions for longer vehicles in PPH, the cost efficiency could be greatly improved. The purpose of such a framework is to allow and enable, for PPH exclusively, the use of 2?×?40 foot or even two semi-trailers using only one vehicle in the context of the Swedish regulatory framework. This paper develops a strategic calculation model for assessing and investigating the consequences of such a framework and investigates the framework's potential in terms of cost efficiency. The model in combination with a sensitivity analysis of input variables gives a comprehensive understanding of the effects of PPH under different circumstances. From the results, it is evident that there are substantial positive effects associated with a PPH framework of longer vehicles. Results indicate that a typical shipper may experience cost reductions of about 5–10% of the total costs of the intermodal transport chain. In summary, a more innovative and flexible legal framework regarding vehicle length in the PPH links can contribute to a greater modal shift, improved cost efficiency and more environmentally friendly transportation systems.     

A dynamic marketing model for hybrid electric vehicles: A case study of Taiwan

This study uses an integrated model utilizing a small-world network and choice-based conjoint adoption model to examine the dynamics of consumer choice and diffusion in the hybrid electric vehicles market. It specifically compares the effectiveness of hybrid diffusion through the traditional word of mouth and via social media. The results show that without the advantage of increased gasoline prices, the growth of the hybrid vehicles market is insignificant, and that the Internet has a significant influence on the word of mouth effect in the purchasing process. Hybrid electric vehicles market shares decrease dramatically as a result of negative word of mouth communication via social media. The use of a higher fuel taxes is more effective than providing a subsidy for disposing of old vehicles and purchasing a hybrid.     

Development a new power management strategy for power split hybrid electric vehicles

Reduction of greenhouse gas emission and fuel consumption as one of the main goals of automotive industry leading to the development hybrid vehicles. The objective of this paper is to investigate the energy management system and control strategies effect on fuel consumption, air pollution and performance of hybrid vehicles in various driving cycles. In order to simulate the hybrid vehicle, the combined feedback–feedforward architecture of the power-split hybrid electric vehicle based on Toyota Prius configuration is modeled, together with necessary dynamic features of subsystem or components in ADVISOR. Multi input fuzzy logic controller developed for energy management controller to improve the fuel economy of a power-split hybrid electric vehicle with contrast to conventional Toyota Prius Hybrid rule-based controller. Then, effects of battery’s initial state of charge, driving cycles and road grade investigated on hybrid vehicle performance to evaluate fuel consumption and pollution emissions. The simulation results represent the effectiveness and applicability of the proposed control strategy. Also, results indicate that proposed controller is reduced fuel consumption in real and modal driving cycles about 21% and 6% respectively.     

A decision analysis framework for intermodal transport: Comparing fuel price increases and the internalisation of external costs

This paper presents the impact of fuel price increases on the market area of intermodal transport terminals. Aim of this research is to determine whether an increase in fuel prices is sufficient enough to raise the market area of intermodal transport to the same degree that would be accomplished by stimulating intermodal transport through policy instruments. Therefore, several fuel price scenarios are analysed in order to verify the impact of different fuel price evolutions on the market area of unimodal road transport compared to intermodal transport in Belgium. The LAMBIT-model (Location Analysis for Belgian Intermodal Terminals), which is a GIS-based model (Macharis and Pekin, 2008), is used to analyse the different fuel price increases and enables a visualisation of the impact on the market area. The LAMBIT model incorporates the different network layers for each transport mode by setting up a GIS network that includes four different layers: the road network, the rail network, the inland waterways network and the final haulage network. The geographic locations of the intermodal terminals and the port of Antwerp are added as nodes in the network and the Belgian municipality centres are defined and connected to the different network layers. Based on the different fuel price scenarios representing respectively a fuel price increase with 10% (low price case), 50% (business as usual case) and 90% (high price case), the results of the LAMBIT model show that the market areas rise in favour of intermodal barge/road and intermodal rail/road. Depending on the scenario, the degree of modal shift however differs. Additionally, in order to compare policy measures with the effect of a fuel price increase, the internalisation of the external costs is analysed with the LAMBIT model. For some years, the European Commission is supporting the idea that transportation costs should reflect the true impacts on environment and society, and is relentlessly pushing towards the so called ‘internalisation of external costs’ as a policy instrument in order to establish fair and efficient pricing of different transport modes. This requires monetarizing the external effects of transport and adding them to the already internalized costs in order to give the correct price signals. Results of this comparative analysis performed with the LAMBIT model are also presented in this paper.     

Fuel economy improvements for urban driving: Hybrid vs. intelligent vehicles

The quest for more fuel-efficient vehicles is being driven by the increasing price of oil. Hybrid electric powertrains have established a presence in the marketplace primarily based on the promise of fuel savings through the use of an electric motor in place of the internal combustion engine during different stages of driving. However, these fuel savings associated with hybrid vehicle operation come at the tradeoff of a significantly increased initial vehicle cost due to the increased complexity of the powertrain. On the other hand, telematics-enabled vehicles may use a relatively cheap sensor network to develop information about the traffic environment in which they are operating, and subsequently adjust their drive cycle to improve fuel economy based on this information – thereby representing ‘intelligent’ use of existing powertrain technology to reduce fuel consumption. In this paper, hybrid and intelligent technologies using different amounts of traffic flow information are compared in terms of fuel economy over common urban drive cycles. In order to develop a fair comparison between the technologies, an optimal (for urban driving) hybrid vehicle that matches the performance characteristics of the baseline intelligent vehicle is used. The fuel economy of the optimal hybrid is found to have an average of 20% improvement relative to the baseline vehicle across three different urban drive cycles. Feedforward information about traffic flow supplied by telematics capability is then used to develop alternative driving cycles firstly under the assumption there are no constraints on the intelligent vehicle’s path, and then taking into account in the presence of ‘un-intelligent’ vehicles on the road. It is observed that with telematic capability, the fuel economy improvements equal that achievable with a hybrid configuration with as little as 7 s traffic look-ahead capability, and can be as great as 33% improvement relative to the un-intelligent baseline drivetrain. As a final investigation, the two technologies are combined and the potential for using feedforward information from a sensor network with a hybrid drivetrain is discussed.     

Extracting driving characteristics from heavy goods vehicle tachograph charts

European Union regulations require haulage companies of member states like the UK to keep records of their drivers’ hours of work. All heavy goods vehicles (HGV's) over 7.5 tonnes are fitted with tachographs which record a driver's operating activities (periods of driving, other work and rest). These records are etched onto a laminated chart by various styli, one of which records the vehicle's speed. This paper describes the development and testing of a new technique for extracting individual driving characteristics from the speed trace of an HGV tachograph chart to calculate four parameters: distance travelled, average speed, time travelled and speed variability.

The average speed, time travelled and speed variability were analysed statistically using one‐way analysis of variance tests. Speed variability was found to be particularly useful for identifying differences between individual driver's behaviour. Once differences in behaviours can be identified it may be possible to link certain driving habits to factors such as component wear, accident rates and excessive fuel usage.     

Symbolism in California’s early market for hybrid electric vehicles

This study explores the symbolic meanings being created, appropriated, and communicated by the owners of hybrid electric vehicles. As symbolic meanings are shown to be important to hybrid electric vehicle purchase and use, understanding the meanings, as well as their construction and communication, is essential for policy makers and others hoping to promote these new types of vehicles. Hybrid electric vehicles embody combinations of meanings that were previously unavailable from automobiles. Market observers who fail to recognize this struggle to explain why some people buy hybrid electric vehicles. They may characterize buyers as naı¨ve about calculating payback on fuel economy, or dismiss owners as image-seeking environmentalists. This research belies such simplistic explanations. Through the telling and analysis of buyers’ own stories, this study takes a robust approach to understanding the creation and spread of new symbolic meanings in the automotive market. Data were collected in ethnographic interviews with hybrid electric vehicle owners in the California, and analyzed using methods based on semiotic theory. In particular, the study explores how widely recognized social meanings (denotations) are connected to more personal meanings (connotations) and the effect that both types of meanings have on vehicle purchase and use.     

Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.     

Transport bottlenecks and Tanzania's economic problems

Abstract

The paper discusses Tanzania's transport problems in the context of the prevailing acute economic crisis. It looks at the development of the transport system, especially the rail and road network, from the German days to the new Chinese‐built Tanzania‐Zambia Railway. The East‐West orientation of the major parallel rail lines and roads reflects the dependency of the economy on export‐import trade. A major challenge to the transport system is the haulage of agricultural products, mainly for export but also for the internal market, not to mention the haulage of imported commodities.

The provision and utilization of transport services is discussed in the context of the historical, and institutional setting of the road haulage industry, particularly its public and private sector configurations. Due to scarcity of foreign exchange, both sectors, especially the private, are starved of vehicles and spare parts.

The operation of ocean and lake shipping services and Air Tanzania are discussed. It is recommended that the latter should concentrate on essential domestic services plus some limited regional services. External financing of transport projects and its implications are also considered.

It is concluded that despite the break‐up of the East African transport system, the Tanzanian transport system, although shaky, has avoided major breakdowns and in some cases, especially in trade, has provided the foundation for at least medium‐term improvements. More attention is recommended to organizational problems of track use by freight and passenger carriers and to making the best use of existing facilities.     

Measuring the performance of intermodal freight terminals

As the interface point between road and rail, intermodal freight terminals (IFTs) are critical elements in the total freight distribution chain. This paper addresses the twin objectives of reducing freight transport costs and improving customer service by putting forward a number of indicators designed to measure the performance of IFTs. Each of the three major performance areas, namely customer service, operational efficiency and terminal productivity are discussed in detail.

A methodology is put forward which enables operating strategies to be evaluated. Computer simulation is used in order to arrive at strategies which reduce operating and capital costs and satisfy customer service requirements. The simulation model outputs include performance measures related to customer service such as mean waiting times required for loading and unloading of containers, as well as productivity measures of terminal operations such as lifting equipment utilisation.     

Microscopic simulation of transit operations: policy studies with the MISTRANSIT application programming interface

Abstract

Microscopic traffic simulators are the most advanced tools for representing the movement of vehicles on a transport network. However, the energy spent in traffic microsimulation has been mainly oriented to cars. Little interest has been devoted to more sophisticated models for simulating transit systems. Commercial software has some options to incorporate the operation of transit vehicles, but they are insufficient to properly consider a real public transport system. This paper develops an Application Programming Interface, called MIcroscopic Simulation of TRANSIT (MISTRANSIT), using the commercial microsimulator PARAllel MICroscopic Simulation. MISTRANSIT makes advances in three ways: public transport vehicles can have new characteristics; passengers are incorporated and traced as individual objects; and specific models represent the interaction between passengers and vehicles at stops. This paper presents the modelling approach as well as various experiments to illustrate the feasibility of MISTRANSIT for studying policy operations of transit systems.     

Consumer preferences for electric vehicles: a literature review

Widespread adoption of electric vehicles (EVs) may contribute to the alleviation of problems such as environmental pollution, global warming and oil dependency. However, the current market penetration of EV is relatively low in spite of many governments implementing strong promotion policies. This paper presents a comprehensive review of studies on consumer preferences for EV, aiming to better inform policy-makers and give direction to further research. First, we compare the economic and psychological approach towards this topic, followed by a conceptual framework of EV preferences which is then implemented to organise our review. We also briefly review the modelling techniques applied in the selected studies. Estimates of consumer preferences for financial, technical, infrastructure and policy attributes are then reviewed. A categorisation of influential factors for consumer preferences into groups such as socio-economic variables, psychological factors, mobility condition, social influence, etc. is then made and their effects are elaborated. Finally, we discuss a research agenda to improve EV consumer preference studies and give recommendations for further research.

Abbreviations: AFV: alternative fuel vehicle; BEV: battery electric vehicle; CVs: conventional vehicles; EVs: electric vehicles; FCV: fuel cell vehicle; HCM: hybrid choice model; HEV: hybrid electric vehicle (non plug-in); HOV: high occupancy vehicle; MNL: MultiNomial logit; MXL: MiXed logit model; PHEV: plug-in hybrid electric vehicle; RP: revealed preference; SP: stated preference.     

Intermodal freight transport planning – A receding horizon control approach

This paper investigates intermodal freight transport planning problems among deep-sea terminals and inland terminals in hinterland haulage for a horizontally fully integrated intermodal freight transport operator at the tactical container flow level. An intermodal freight transport network (IFTN) model is first developed to capture the key characteristics of intermodal freight transport such as the modality change phenomena at intermodal terminals, physical capacity constraints of the network, time-dependent transport times on freeways, and time schedules for trains and barges. After that, the intermodal freight transport planning problem is formulated as an optimal intermodal container flow control problem from a system and control perspective with the use of the proposed IFTN model. To deal with the dynamic transport demands and dynamic traffic conditions in the IFTN, a receding horizon intermodal container flow control (RIFC) approach is proposed to control and to reassign intermodal container flows in a receding horizon way. This container flow control approach involves solving linear programming problems and is suited for transport planning on large-sized networks. Both an all-or-nothing approach and the proposed RIFC approach are evaluated through simulation studies. Simulation results show the potential of the proposed RIFC approach.     

Some thoughts on competitive tendering in local bus operations

Abstract

This article is derived from a report by Metra Consulting Group for the Dutch Ministry of Public Health and the Environment. The aim of Metra's study was to identify ways of reducing the environmental nuisance of urban traffic without adding excessively to transport costs.

The main theme of the article is that the traditional idea of an inherent conflict between transport efficiency and the environment is mistaken. Both efficiency and the environment are threatened by the same thing: the excessive and indiscriminate use of vehicles. This comes about because of defects in the fiscal and regulatory framework within which people take transport decisions. Suitable reforms in this framework would simultaneously enhance the environment and improve access for all classes of road user.

In the development of this theme, particular attention is paid to transport activities which tend to be neglected by policy makers, such as walking, cycling and urban goods distribution; and to measures which are not always thought of as instruments of policy at all, such as locational policy and development control, vehicle design, and vehicle taxation, especially of goods vehicles.     

A vehicle manufacturer's view of the potential for electric automobiles

In the search for low pollution, low noise, multi‐fuel vehicles capable of adapting to almost any source of energy available, the electric vehicle continues to be suggested in a variety of forms. In the long‐term view, working on the hypothesis that either solar or nuclear energy can provide the only inexhaustible energy supplies, electric propulsion will undoubtedly have a significant role to perform, and it could provide a useful means of transport in the transition period out of the current dependency on crude oil.

There are, however, some grave question marks hanging over the viability of electric vehicles on a large scale both in terms of their energy efficiency and practicality. This paper describes the state of development and discusses the future prospects.     

Assessment of hybrid‐drive bus fuel savings for Brazilian urban transit

Buses are the main transit mode in Brazil, transporting more than 55 million passengers per day. Most of these vehicles run on diesel oil causing a dependence on oil, extensive greenhouse gas emissions and increasing air pollution in urban areas. In order to improve this situation, options for Brazilian cities include the use of alternative fuels and new propulsion technologies, such as hybrid vehicles. This paper proposes a procedure for evaluating the performance of a recently developed hybrid‐drive technology. A simple procedure is presented to compare hybrid‐drive buses with conventional diesel buses in urban operations, particularly with respect to fuel economy. Next the potential for reducing diesel oil consumption through the use of hybrid‐drive buses is assessed. Field tests carried out by the authors indicate that fuel consumption improvement through the use of hybrid‐drive buses would certainly exceed 20%, resulting in lower fuel costs and carbon dioxide (CO₂) emissions.     

Lead demand of future vehicle technologies

Changes in battery technology for hybrid or fuel cell vehicles will have significant impacts on US lead flows. Hybrid vehicles contain lead–acid batteries as auxiliary power sources although these lead–acid batteries may be replaced in the future. Given the importance of lead–acid battery recycling to US lead flows, changes in battery-related lead demand could alter the domestic production of lead and affect lead releases to the environment, particularly to air and land. We investigate lead demand for various prospective changes in the US automotive fleet. These include the complete replacement of lead–acid batteries from vehicles (such as next-generation hybrid electric vehicles or use of alternative batteries) or the introduction of micro-hybrid vehicles (lead battery pack vehicles). A dynamic model is described and used to examine the immediate and long-term lead flow patterns, and the associated lead emissions. We conclude that the adoption of non-lead–acid hybrid vehicles does not result in the lead market collapsing unless there is rapid introduction of these vehicles to the fleet, 50% by 2007. A 10% increase in micro-hybrid (battery pack) vehicles results in a predicted increase of 26 tons of lead emissions over the status quo or a 6% increase over 2004 Toxics Release Inventory releases from mining, primary smelting, and secondary smelting.     

A survey of Hungarian transport policy

Abstract

In its introductory part this article discusses the principles of the transport policy approved in 1968, followed by the reasons behind the advances on this policy approved in 1978.

It then goes on to review the Hungarian transport pattern and organization, including the roles played by the railways, the road transport companies, the state‐owned enterprises as well as cooperatives, urban transport, shipping, air transport, pipelines, and private transport.

In discussing the division of labour (or market sharing) in transport it concludes that passenger transport is increasing slowly, while the proportion of private transport is continuing to rise. A moderate increase is expected in goods transport with a decline in the share of the railways and a rise in that of the other transport branches. This division of labour is being influenced by economic, not administrative, means.

The main target of the advanced transport policy is to shape a transport system which corresponds to socioeconomic requirements. This means that goods transport capacities must be put to more efficient use, which involves improving development, organizational and planning operations. In passenger transport priority must go to public transport while the proportion of private transport must be defined in keeping with demand and economic possibilities.

In the development of the infrastructure and investments, the need to improve energy use and protect the environment must be stressed.

The rest of the article presents the detailed reasoning behind the measures already taken and scheduled to be taken to achieve these main targets.     

A comparison of technologies for carbon-neutral passenger transport

In this study, the use of energy carriers based on renewable energy sources in battery-powered electric vehicles (BPEVs), fuel-cell electric vehicles (FCEVs), hybrid electric vehicles (HEVs) and internal combustion engine vehicles (ICEVs) is compared regarding energy efficiency, emission and cost. There is the potential to double the primary energy compared with the current level by utilising vehicles with electric drivetrains. There is also major potential to increase the efficiency of conventional ICEVs. The energy and environmental cost of using a passenger car can be reduced by 50% solely by using improved ICEVs instead of ICEVs with current technical standard. All the studied vehicles with alternative powertrains (HEVs, FCEVs, and BPEVs) would have lower energy and environmental costs than the ICEV. The HEVs, FCEVs and BPEVs have, however, higher costs than the future methanol-fuelled ICEV, if the vehicle cost is added to the energy and environmental costs, even if significant cost reductions for key technologies such as fuel cells, batteries and fuel storages are assumed. The high-energy efficiency and low emissions of these vehicles cannot compensate for the high vehicle cost. The study indicates, however, that energy-efficiency improvements, combined with the use of renewable energy, would reduce the cost of CO₂ reduction by 40% compared with a strategy based on fuel substitution only.     

Emission rates of intermodal rail/road and road-only transportation in Europe: A comprehensive simulation study

Intermodal rail/road transportation combines advantages of both modes of transport and is often seen as an effective approach for reducing the environmental impact of freight transportation. This is because it is often expected that rail transportation emits less greenhouse gases than road transportation. However, the actual emissions of both modes of transport depend on various factors like vehicle type, traction type, fuel emission factors, payload utilization, slope profile or traffic conditions. Still, comprehensive experimental results for estimating emission rates from heavy and voluminous goods in large-scale transportation systems are hardly available so far. This study describes an intermodal rail/road network model that covers the majority of European countries. Using this network model, we estimate emission rates with a mesoscopic model within and between the considered countries by conducting a large-scale simulation of road-only transports and intermodal transports. We show that there are high variations of emission rates for both road-only transportation and intermodal rail/road transportation over the different transport relations in Europe. We found that intermodal routing is more eco-friendly than road-only routing for more than 90% of the simulated shipments. Again, this value varies strongly among country pairs.