Distributions of travel time variability on urban roads

Reliability is an important factor in route, mode and also departure time choice analysis and is a key performance indicator for transport systems. However, the current metrics used to measure travel time variability may be not sufficient to fully represent reliability. Better understanding of the distributions of travel times is needed for the development of improved metrics for reliability. A comprehensive data analysis involving the assessment of longitudinal travel time data for two urban arterial road corridors in Adelaide, Australia, demonstrates that the observed distributions are more complex than previously assumed. The data sets demonstrate strong positive skew, very long upper tails, and sometimes bimodality. This paper proposes the use of alternative statistical distributions for travel time variability, with the Burr Type XII distribution emerging as an appropriate model for both links and routes. This statistical distribution has some attractive properties that make it suitable for explicit definition of many travel time reliability metrics. Copyright © 2011 John Wiley & Sons, Ltd.     

Urban traffic state estimation: Fusing point and zone based data

Loop detectors are the oldest and widely used traffic data source. On urban arterials, they are mainly installed for signal control. Recently state-of-the art Bluetooth MAC Scanners (BMS) has significantly captured the interest of stakeholders for exploiting it for area-wide traffic monitoring. Loop detectors provide flow – a fundamental traffic parameter; whereas BMS provides individual vehicle travel time between BMS stations. Hence, these two data sources complement each other, and if integrated should increase the accuracy and reliability of the traffic state estimation.This paper proposed a model that integrates loops and BMS data for seamless travel time and density estimation for urban signalised network. The proposed model is validated using both real and simulated data and the results indicate that the accuracy of the proposed model is over 90%.     

Estimating freeway route travel time distributions with consideration to time‐of‐day,inclement weather,and traffic incidents

This paper develops an efficient probabilistic model for estimating route travel time variability, incorporating factors of time‐of‐day, inclement weather, and traffic incidents. Estimating the route travel time distribution from historical link travel time data is challenging owing to the interactions among upstream and downstream links. Upon creating conditional probability function for each link travel time, we applied Monte Carlo simulation to estimate the total travel time from origin to destination. A numerical example of three alternative routes in the City of Buffalo shows several implications. The study found that weather conditions, except for snow, incur minor impact on off‐peak and weekend travel time, whereas peak travel times suffer great variations under different weather conditions. On top of that, inclement weather exacerbates route travel time reliability, even when mean travel time increases moderately. The computation time of the proposed model is linearly correlated to the number of links in a route. Therefore, this model can be used to obtain all the origin to destination travel time distributions in an urban region. Further, this study also validates the well‐known near‐linear relation between the standard deviation of travel time per unit distance and the corresponding mean value under different weather conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

Estimating performance of traffic signals based on link travel times

Recent advances in communication and computing technology have made travel time measurements more available than ever before. In urban signalized arterials, travel times are strongly influenced by traffic signals. This study presents a novel method based on well‐known principles to estimate traffic signal performance (or more precisely their major “through” movements) based on travel time measurements. The travel times were collected between signals in the field by using point‐to‐point travel time measurement technologies. Closed‐circuit television cameras and signal databases were used to collect traffic demand and signal timings, respectively. Then, the volume/capacity ratio of major downstream signal movements was computed based on demand and signal timings. This volume/capacity ratio was then correlated with travel times on the relevant intersection approach. The best volume‐delay function was found, along with many other functions, to fit the field data. This volume‐delay function was then used to estimate volume/capacity ratios and, indirectly, a few other signal performance metrics. The method, called travel time‐based signal performance measurements, was automated and displayed on a Google Map. The findings show that the proposed method is accurate and robust enough to provide necessary information about signal performance. A newly developed volume‐delay function was found to work just slightly better than the Bureau of Public Roads curve. Several issues, which may reduce the accuracy of the proposed method, are identified, and their solutions are proposed for future research. Copyright © 2016 John Wiley & Sons, Ltd.     

A model and solution algorithm for dynamic deterministic user equilibrium assignment

Abstract

In this paper a route-based dynamic deterministic user equilibrium assignment model is presented. Some features of the linear travel time model are first investigated and then a divided linear travel time model is proposed for the estimation of link travel time: it addresses the limitations of the linear travel time model. For the application of the proposed model to general transportation networks, this paper provides thorough investigations on the computational issues in dynamic traffic assignment with many-to-many OD pairs and presents an efficient solution procedure. The numerical calculations demonstrate that the proposed model and solution algorithm produce satisfactory solutions for a network of substantial size with many-to-many OD pairs. Comparisons of assignment results are also made to show the impacts of incorporation of different link travel time models on the assignment results.     

On including travel time reliability of road traffic in appraisal

In many countries, decision-making on proposals for national or regional infrastructure projects in passenger and freight transport includes carrying out a cost–benefit analysis for these projects. Reductions in travel times are usually a key benefit. However, if a project also reduces the variability of travel time, travellers, freight operators and shippers will enjoy additional benefits, the ‘reliability benefits’. Until now, these benefits are usually not included in the cost–benefit analysis. To include reliability of travel or transport time in the cost–benefit analysis of infrastructure projects not only monetary values of reliability, but also reliability forecasting models are needed. As a result of an extensive feasibility study carried out for the German Federal Ministry of Transport, Building and Urban Development this paper aims to provide a literature overview and outcomes of an expert panel on how best to calculate and monetise reliability benefits, synthesised into recommendations for implementing travel time reliability into existing transport models in the short, medium, and long term. The paper focuses on road transport, which has also been the topic for most of the available literature on modelling and valuing transport time reliability.     

Probe vehicle based real-time traffic monitoring on urban roadways

Travel time estimation and prediction on urban arterials is an important component of Active Traffic and Demand Management Systems (ATDMS). This paper aims in using the information of GPS probes to augment less dynamic but available information describing arterial travel times. The direction followed in this paper chooses a cooperative approach in travel time estimation using static information describing arterial geometry and signal timing, semi-dynamic information of historical travel time distributions per time of day, and utilizes GPS probe information to augment and improve the latter. First, arterial travel times are classified by identifying different travel time states, then link travel time distributions are approximated using mixtures of normal distributions. If prior travel time data is available, travel time distributions can be estimated empirically. Otherwise, travel time distribution can be estimated based on signal timing and arterial geometry. Real-time GPS travel time data is then used to identify the current traffic condition based on Bayes Theorem. Moreover, these GPS data can also be used to update the parameters of the travel time distributions using a Bayesian update. The iterative update process makes the posterior distributions more and more accurate. Finally, two comprehensive case studies using the NGSIM Peachtree Street dataset, and GPS data of Washington Avenue in Minneapolis, were conducted. The first case study estimated prior travel time distributions based on signal timing and arterial geometry under different traffic conditions. Travel time data were classified and corresponding distributions were updated. In addition, results from the Bayesian update and EM algorithm were compared. The second case study first tested the methodologies based on real GPS data and showed the importance of sample size. In addition, a methodology was proposed to distinguish new traffic conditions in the second case study.     

Investigating the effect of travel time variability on drivers' route choice decisions in Shanghai,China

Abstract

This paper investigates the effect of travel time variability on drivers' route choice behavior in the context of Shanghai, China. A stated preference survey is conducted to collect drivers' hypothetical choice between two alternative routes with designated unequal travel time and travel time variability. A binary choice model is developed to quantify trade-offs between travel time and travel time variability across various types of drivers. In the model, travel time and travel time variability are, respectively, measured by expectation and standard deviation of random travel time. The model shows that travel time and travel time variability on a route exert similarly negative effects on drivers' route choice behavior. In particular, it is found that middle-age drivers are more sensitive to travel time variability and less likely to choose a route with travel time uncertainty than younger and elder drivers. In addition, it is shown that taxi drivers are more sensitive to travel time and more inclined to choose a route with less travel time. Drivers with rich driving experience are less likely to choose a route with travel time uncertainty.     

Comparative analysis of three user equilibrium models under stochastic demand

Recent empirical studies on the value of time and reliability reveal that travel time variability plays an important role on travelers' route choice decision process. It can be considered as a risk to travelers making a trip. Therefore, travelers are not only interested in saving their travel time but also in reducing their risk. Typically, risk can be represented by two different aspects: acceptable risk and unacceptable risk. Acceptable risk refers to the reliability aspect of acceptable travel time, which is defined as the average travel time plus the acceptable additional time (or buffer time) needed to ensure more frequent on‐time arrivals, while unacceptable risk refers to the unreliability aspect of unacceptable late arrivals (though infrequent) that have a travel time excessively higher than the acceptable travel time. Most research in the network equilibrium based approach to modeling travel time variability ignores the unreliability aspect of unacceptable late arrivals. This paper examines the effects of both reliability and unreliability aspects in a network equilibrium framework. Specifically, the traditional user equilibrium model, the demand driven travel time reliability‐based user equilibrium model, and the α‐reliable mean‐excess travel time user equilibrium model are considered in the investigation under an uncertain environment due to stochastic travel demand. Numerical results are presented to examine how these models handle risk under travel time variability.     

Space,money, life-stage,and the allocation of time

Demographic, socioeconomic, seasonal, and scheduling factors affect the allocation of time to various activities. This paper examines those variables through exploration of the 1990 Nationwide Personal Transportation Survey, which has been inverted to track activity duration. Two key issues are considered. First, how much can activity duration and frequency explain travel duration? The analysis shows activity duration has positive and significant effects on travel duration, supporting recent arguments in favor of activity based models. Second, which recent trend is the main culprit in the rise in travel: suburbanization, rising personal incomes, or female labor force participation? This paper examines the share of time within a 24-hour budget allocated to several primary activities: home, work, shop, and other. The data suggest that income and location have modest effects on time allocation compared with the loss of discretionary time due to working.

     

Statistical and activity-based modeling of university student travel behavior

Abstract

This paper conducts a statistical analysis of student travel behavior at Virginia Commonwealth University (VCU). The data source is the ‘University NHTS’ project launched by the Virginia Department of Transportation (VDOT) in 2009. Through this empirical study, it has been found that university student travel behavior is different from that of the general population; urban universities have lower percentages of nonmotorized trips than college-town universities; undergraduate students are likely to make more daily trips than graduate students – similarly, on-campus students make more frequent trips than off-campus students; the most frequent student activities are home and academic activities; and student group categories have virtually no impact on daily activity profiles, though activity types do have a dramatic impact on daily activity profiles. Based on these research findings, the paper makes a series of recommendations regarding trip generation, trip distribution, mode choice, and activity-based modeling.     

Travel time ratio: the key factor of spatial reach

An important aspect of reach and accessibility is the time people are willing to spend on reaching activity places. In this paper we see the issue of travel time in an alternative way. Instead of looking at travel time separated from time spent on activities, we examine the relation between travel time and stay time. We operationalize this relation with the concept “travel time ratio”. A hypothetical framework underlying these travel time ratios is displayed. We show that for similar types of activity places the value of travel time ratio are in accordance with each other. We find large differences between trips for mandatory activities and trips for discretionary activities. The results indicate the stability of the travel time ratios. Finally, some implications for future research and policy will be mentioned. This revised version was published online in June 2006 with corrections to the Cover Date.     

Estimation of value of travel time reliability

In mode choice decision, travelers consider not only travel time but also reliability of its modes. In this paper, reliability was expressed in terms of standard deviation and maximum delay that were measured based on triangular distribution. In order to estimate value of time and value of reliability, the Multinomial and Nested Logit models were used. The analysis results revealed that reliability is an important factor affecting mode choice decisions. Elasticity is used to estimate the impacts of the different policies and system improvements for water transportation mode. Among these policies, decision maker can assess and select the best alternative by doing the benefit and cost analysis based on a new market share, the value of time, and the value of reliability. Finally, a set of promising policies and system improvement of the water transportation were proposed.     

Evaluation of different contraflow strategies for hurricane evacuation in Charleston,South Carolina

Abstract

Limited specific evidence is available on the effectiveness of using contraflow as an evacuation traffic management tool. This study was conducted to determine the best combination of strategy options for evacuating Charleston, SC, along route I-26 during the event of a hurricane or other events. PARAMICS microscopic traffic simulator was used to evaluate the impact of each combination of evacuee response timing and traffic control strategy, such as contraflow, with respect to average vehicular travel time and evacuation duration. Analysis revealed the combination of management strategies that created the lowest evacuation durations and travel times for several types of anticipated evacuee responses. Furthermore, a proposed reconfiguration of the I-526/I-26 interchange for contraflow operations produced additional savings in travel times and evacuation durations. These findings support the use of all lanes for contraflow during all evacuations and provide justification to examine a possible reconfiguration of the I-526/I-26 interchange for use during evacuations.     

A multi‐class mean‐excess traffic equilibrium model with elastic demand

Recent empirical studies have revealed that travel time variability plays an important role in travelers' route choice decisions. To simultaneously account for both reliability and unreliability aspects of travel time variability, the concept of mean‐excess travel time (METT) was recently proposed as a new risk‐averse route choice criterion. In this paper, we extend the mean‐excess traffic equilibrium model to include heterogeneous risk‐aversion attitudes and elastic demand. Specifically, this model explicitly considers (1) multiple user classes with different risk‐aversions toward travel time variability when making route choice decisions under uncertainty and (2) the elasticity of travel demand as a function of METT when making travel choice decisions under uncertainty. This model is thus capable of modeling travelers' heterogeneous risk‐averse behaviors with both travel choice and route choice considerations. The proposed model is formulated as a variational inequality problem and solved via a route‐based algorithm using the modified alternating direction method. Numerical analyses are also provided to illustrate the features of the proposed model and the applicability of the solution algorithm. Copyright © 2012 John Wiley & Sons, Ltd.     

A study of traveler behavior under traffic information-provided conditions in the Beijing area

ABSTRACT

The quality of traffic information has become one of the most important factors that can affect the distribution of urban and highway traffic flow by changing the travel route, transportation mode, and travel time of travelers and trips. Past research has revealed traveler behavior when traffic information is provided. This paper summarizes the related study achievements from a survey conducted in the Beijing area with a specially designed questionnaire considering traffic conditions and the provision of traffic information services. With the survey data, a Logit model is estimated, and the results indicate that travel time can be considered the most significant factor that affects highway travel mode choice between private vehicles and public transit, whereas trip purpose is the least significant factor for private vehicle usage for both urban and highway travel.     

The design of environmentally aware travel diaries

Any policy addressing the concerns and trends associated with the impact of travel on the environment should be based on a solid understanding of the activities giving rise to them. While the measurement of the total environment loads by air or noise measurement stations is essential, it needs to be matched by the observation of the human behaviours creating them. This is especially true in the transport sector, which has been rightly or wrongly identified as having the potential to make a substantial contribution to the reduction of air and noise pollution. While the contribution of freight transport is of growing concern and importance, this paper focuses on the measurement of passenger transport throughout.

In the past transport planners have largely relied on the travel diary as their prime instrument to measure traveller behaviour. The travel diary is a survey instrument designed to record all movements during the course of one or more days including their relevant details. It is complemented by spearate household and personal forms for recording general information. In the following paper the term travel diary implies all three elements (the diary, the person form and the household form).

The remainder of the paper discusses to what extent and how the travel diary can be used to capture data for the assessment of policies directed at reducing the impact of transport on the social and natural environment. The requirements of a travel diary and the potential uses of new technologies in realising such a travel diary are then presented. A brief outlook on the possibilities of reasling such a diary concludes the paper.     

A solution algorithm for a dynamic deterministic user equilibrium assignment model with departure time choice

Abstract

A route-based combined model of dynamic deterministic route and departure time choice and a solution method for many origin and destination pairs is proposed. The divided linear travel time model is used to calculate the link travel time and to describe the propagation of flow over time. For the calculation of route travel times, the predictive ideal route travel time concept is adopted. Solving the combined model of dynamic deterministic route and departure time choice is shown to be equivalent to solving simultaneously a system of non-linear equations. A Newton-type iterative scheme is proposed to solve this problem. The performance of the proposed solution method is demonstrated using a version of the Sioux Falls network. This shows that the proposed solution method produces good equilibrium solutions with reasonable computational cost.     

Discussing the “positive utilities” of autonomous vehicles: will travellers really use their time productively?

ABSTRACT

Autonomous vehicles (AVs) are expected to reshape travel behaviour and demand in part by enabling productive uses of travel time—a primary component of the “positive utility of travel” concept—thus reducing subjective values of travel time savings (VOT). Many studies from industry and academia have assumed significant increases in travel time use and reductions in VOT for AVs. In this position paper, I argue that AVs’ VOT impacts may be more modest than anticipated and derive from a different source. Vehicle designs and operations may limit activity engagement during travel, with AV users feeling more like car passengers than train riders. Furthermore, shared AVs may attenuate travel time use benefits, and productivity gains could be limited to long-distance trips. Although AV riders will likely have greater activity participation during travel, many in-vehicle activities today may be more about coping with commuting burdens than productively using travel time. Instead, VOT reductions may be more likely to arise from a different “positive utility”—subjective well-being improvements through reduced stresses of driving or the ability to relax and mentally transition. Given high uncertainty, further empirical research on the experiential, time use, and VOT impacts of AVs is needed.     

Practical approach for travel time estimation from point traffic detector data

Accurate estimation of travel time is critical to the success of advanced traffic management systems and advanced traveler information systems. Travel time estimation also provides basic data support for travel time reliability research, which is being recognized as an important performance measure of the transportation system. This paper investigates a number of methods to address the three major issues associated with travel time estimation from point traffic detector data: data filling for missing or error data, speed transformation from time‐mean speed to space‐mean speed, and travel time estimation that converts the speeds recorded at detector locations to travel time along the highway segment. The case study results show that the spatial and temporal interpolation of missing data and the transformation to space‐mean speed improve the accuracy of the estimates of travel time. The results also indicate that the piecewise constant‐acceleration‐based method developed in this study and the average speed method produce better results than the other three methods proposed in previous studies. Copyright © 2011 John Wiley & Sons, Ltd.