Carbon emission from urban passenger transportation in Beijing

Urban passenger transport significantly contributes to global greenhouse gas emissions, especially in developing countries owing to the rapid motorization, thus making it an important target for carbon reduction. This article established a method to estimate and analyze carbon emission from urban passenger transport including cars, rail transit, taxis and buses. The scope of research was defined based on car registration area, transport types and modes, the stages of rail transit energy consumption. The data availability and gathering were fully illustrated. A city level emission model for the aforementioned four modes of passenger transport was formulated, and parameters including emission factor of electricity and fuel efficiency were tailored according to local situations such as energy structure and field survey. The results reveal that the emission from Beijing’s urban passenger transport in 2012 stood at 15 million tonnes of CO₂, of which 75.5% was from cars, whereas car trip sharing constitutes only 42.5% of the total residential trips. Bus travel, yielding 28.6 g CO₂, is the most efficient mode of transport under the current situations in terms of per passenger kilometer (PKM) emission, whereas car or taxi trips emit more than 5 times that of bus trips. Although a decrease trend appears, Beijing still has potential for further carbon reduction in passenger transport field in contrast to other cities in developed countries. Development of rail transit and further limitation on cars could assist in reducing 4.39 million tonnes CO₂ emission.     

An optimization model of energy and transportation systems: Assessing the high-speed rail impacts in the United States

This paper presents a long-term investment planning model that co-optimizes infrastructure investments and operations across transportation and electric infrastructure systems for meeting the energy and transportation needs in the United States. The developed passenger transportation model is integrated within the modeling framework of a National Long-term Energy and Transportation Planning (NETPLAN) software, and the model is applied to investigate the impact of high-speed rail (HSR) investments on interstate passenger transportation portfolio, fuel and electricity consumption, and 40-year cost and carbon dioxide (CO₂) emissions. The results show that there are feasible scenarios under which significant HSR penetration can be achieved, leading to reasonable decrease in national long-term CO₂ emissions and costs. At higher HSR penetration of approximately 30% relative to no HSR in the portfolio promises a 40-year cost savings of up to $0.63 T, gasoline and jet fuel consumption reduction of up to 34% for interstate passenger trips, CO₂ emissions reduction by about 0.8 billion short tons, and increased resilience against petroleum price shocks. Additionally, sensitivity studies with respect to light-duty vehicle mode share reveal that in order to realize such long-term cost and emission benefits, a change in the passenger mode choice is essential to ensure higher ridership for HSR.     

Relationship between proximity to transit and ridership for journey-to-work trips in Chicago

The use of privately owned vehicles (POVs) contributes significantly to US energy consumption (EC) and greenhouse gas emissions (GHGe). Strategies for reducing POV use include shifting trips to other modes, particularly public transit. Choices to use transit are based on characteristics of travelers, their trips, and the quality of competing transportation services. Here we focus on the proximity of rail stations to trip origins/destinations as a factor affecting mode choice for work trips. Using household travel survey data from Chicago, we evaluate the profile of journey-to-work (JTW) trips, assessing mode share and potential for more travelers to use rail. For work trips having the origin/destination as close as 1 mile from rail transit stations, POVs were still the dominant travel mode, capturing as much as 61%, followed by rail use at 14%. This high degree of POV use coupled with the proportion of JTW trips within close proximity to rail stations indicated that at least some of these trips may be candidates for shifting from POV to rail. For example, shifting all work trips with both the origin/destination within 1 mile of commuter rail stations would potentially reduce the energy associated with all work-related POV driving trips by a maximum of 24%. Based on the analysis of trips having the origin and destination closest to train stations, a complete shift in mode from POV to train could exceed CO₂ reduction goals targeted in the Chicago Climate Action Plan. This could occur with current settlement patterns and the use of existing infrastructure. However, changes in traveler behavior and possibly rail operation would be necessary, making policy to motivate this change essential.     

Regional climate impact of aerosols emitted by transportation modes and potential effects of policies on demand and emissions

The transportation system is one of the main sectors with significant climate impact. In the U.S. it is the second main emitter of carbon dioxide. Its impact in terms of emission of carbon dioxide is well recognized. But a number of aerosol species have a non-negligible impact. The radiative forcing due to these species needs to be quantified. A radiative transfer code is used. Remote sensing data is retrieved to characterize different regions. The radiative forcing efficiency for black carbon are 396 ± 200 W/m²/AOD for the ground mode and 531 ± 190 W/m²/AOD for the air transportation, under clear sky conditions. The radiative forcing due to contrail is 0.14 ± 0.06 W/m² per percent coverage. Based on the forcing from the different species emitted by each mode of transportation, policies may be envisioned. These policies may affect demand and emissions of different modes of transportation. Demand and fleet models are used to quantify these interdependencies. Depending on the fuel price of each mode, mode shifts and overall demand reduction occur, and more fuel efficient vehicles are introduced in the fleet at a faster rate. With the introduction of more fuel efficient vehicles, the effect of fuel price on demand is attenuated. An increase in fuel price of 50 cents per gallon, scaled based on the radiative forcing of each mode, results in up to 5% reduction in emissions and 6% reduction in radiative forcing. With technologies, significant reduction in climate impact may be achieved.     

Short trips: An opportunity for reducing mobile-source emissions?

This paper examines how conversion of automobile trips of less than 3 miles to other transportation modes reduces emissions. Short trips contribute disproportionately to emissions because of cold starts. An analysis is conducted of short-trip behavior across the US using the 1995 Nationwide Personal Transportation Survey. The data is used to develop likely scenarios of mode conversions for short trips, which are then applied to estimate emission savings using MOBILE6 cold start and running emission factors for volatile organic compounds, nitrogen oxides, carbon monoxide, and carbon dioxide. The results suggest that reducing short auto trips would modestly reduce mobile source air pollution, but emission reductions are high compared to most federally-funded surface transportation interventions aimed at improving air quality. Enhanced the community pedestrian environment to encourage short trip mode conversion also produces co-benefits such as increased physical activity and subsequent reductions in chronic diseases.     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

Comparing and presenting city-level transportation CO2 emissions using GIS

In 2011, the European Pollutant Release and Transfer Register (E-PRTR) inventory of diffuse emissions became available, providing data on a range of atmospheric emissions at a 5 km resolution across Europe. The data are produced from spatially disaggregated emissions totals for countries, and must be validated before being used at a sub-national level. The UK government maintains a 1 km resolution emissions inventory based on a bottom-up methodology by which a validation is possible. The UK National Atmospheric Emissions Inventory data are used to assess at what geographic scale the new E-PRTR data might be most useful. This paper compares the two data sets and estimates city-level transportation CO₂ emissions for 149 EU cities. We find that at a functional boundary level the two datasets match well.     

Integrated analysis of GHGs and public health damage mitigation for developing urban road transportation strategies

This study attempts to present an urban road transportation strategy focusing on the mitigation of both GHGs emission and public health damage, taking Xiamen City as a case study. We developed a Public Health and GHGs Emission model to estimate the impacts of direct energy-consumption-related GHGs emissions and public health damage in Xiamen’s road transportation strategies from 2008 to 2025, considering the environmental benefits and economic costs. Two scenarios were designed to describe future transportation strategies for Xiamen City, and mitigation potentials for both GHGs emission and public health costs were estimated from 2008 to 2025 under a series of options. The results show that enacting controls on private vehicles would be most effective to GHGs mitigation, while enacting controls on government and rental vehicles would contribute the most to NO₂ and PM2.5 reductions. Compared with the Business as Usual scenario, the Integrated scenario would achieve about a 68% energy consumption reduction and save 0.23 billion yuan (95% CI: 0.16, 0.32) in health costs in 2025. It is clear that integrated and advisable strategies need to mitigate the adverse impacts of urban road vehicles on GHGs emissions and public health and economic costs, particularly in regions of rapid urbanization.     

VISSIM/MOVES integration to investigate the effect of major key parameters on CO2 emissions

This paper looks at CO₂ emissions on limited access highways in a microscopic and stochastic environment using an optimal design approach. Estimating vehicle emissions based on second-by-second vehicle operation allows the integration of a microscopic traffic simulation model with the latest US Environmental Protection Agency’s mobile source emissions model to improve accuracy. A factorial experiment on a test bed prototype of the I-4 urban limited access highway corridor located in Orlando, Florida was conducted to identify the optimal settings for CO₂ emissions reduction and to develop a microscopic transportation emission prediction model. An exponentially decaying function towards a limiting value expressed in the freeway capacity is found to correlate with CO₂ emission rates. Moreover, speeds between 55 and 60 mph show emission rate reduction effect while maintaining up to 90% of the freeway’s capacity. The results show that speed has a significant impact on CO₂ emissions when detailed and microscopic analysis of vehicle operations of acceleration and deceleration are considered.     

Environmental benefits from improving transportation efficiency in wood procurement systems

Forest operations use fossil fuels, which should be considered when environmental impact in the wood procurement is of concern. Road freight transportation is the most common operation in timber transportation, and thus is an important source of greenhouse gas emissions. This study assesses the impact of the new larger and heavier vehicles (LHV) on environmental emissions using the synchronized calculation method. The maximum (theoretical) and operational effects of 76 t LHV with calculations made for three weight limits (60, 64 and 68 t) are compared in Finland. Based on Enterprise Resource Planning (ERP) data, environmental energy efficiency (measured in relation to the trip) increased 9.2%. The reduction in fuel consumption was 12.5%, though this is likely to under-estimate the long-term effects that will be achieved when forest operations are fully adjusted to the maximum weight limit. A comparison with the European countries and a preliminary sensitivity analysis of the system demonstrate that the technological development to improve the transporting efficiency is essential for realizing 76 t LHV utilization in Finland.     

Measuring foregone output under industry emission reduction target in the transportation sector

Numerous countries have implemented or are considering a range of policies to lower emissions from transportation. An analysis of the impacts of environmental regulation is a crucial issue, which has not been properly highlighted in the transportation literature, particularly in terms of the foregone output by such regulation. This study develops a novel DEA model that measures the foregone output when the industry emissions target is imposed. This model reflects the real regulatory process more appropriately than other models in that the authority in charge sets the emission reduction target first, and the transport operators respond to it. In addition, the model can test the industrywide impacts over a wide range of emission target values, which can help policy makers determine the optimal emission target. Finally, the proposed model was applied to the port industry in Korea. The results suggest that Korean ports can reduce their emissions by a maximum of 239,850 tons of CO₂, which accounts for 13% of the total emissions in 2010. The 13% reduction in emission, however, would result in $ 91,109,000 of foregone cargo traffic to the Korean economy. In addition, the foregone cargo traffic increases at much faster rate than the emission reduction rate. For example, the shadow price of emission differs by 2.25 times between the most moderate and strictest emission targets. This suggests that the government needs to impose moderate emission targets at the initial stages if it decides to minimize the regulatory impacts on the industry.     

CO2 emissions and expansion of railway,road, airline and in-land waterway networks over the 1985–2013 period in China: A time series analysis

China, the world’s largest CO₂ emitter, is continuing its long-term strategy to use transportation investments as a tool for development. With the expectation that transportation will contribute 30–40% of the total CO₂ emissions in China in the near future, there is an imminent need to identify how the development of different transportation modes may have different long-term effects on CO₂ emissions. Using time series data over the period of 1985–2013, this paper applies the combined autoregressive distributed lag (ARDL) and vector error correction model (VECM) approach to identify short- and long-run causal relationships between CO₂ emissions and mode-specific transportation development, including railway, road, airline, and inland waterway. We find that China’s domestic expansions of road, airline, and waterway infrastructure lead to long-run increases in CO₂ emissions. Among them, waterway has the strongest positive impact on CO₂ emissions, followed by road. Despite a short-run, positive impact on CO₂ emissions, railway expansion leads to long-run decreases in CO₂ emissions. The results are especially encouraging for the central government of China given its long-standing and on-going efforts to expand railway infrastructure at the national level. Looking forward, it is recommended that China continues its national investments in railway infrastructure to achieve both environment and economy goals.     

Isocyanic acid and ammonia in vehicle emissions

Vehicles are considered to be an important source of ammonia (NH₃) and isocyanic acid (HNCO). HNCO and NH₃ have been shown to be toxic compounds. Moreover, NH₃ is also a precursor in the formation of atmospheric secondary aerosols. For that reason, real-time vehicular emissions from a series of Euro 5 and Euro 6 light-duty vehicles, including spark ignition (gasoline and flex-fuel), compression ignition (diesel) and a plug-in electric hybrid, were investigated at 23 and −7 °C over the new World harmonized Light-duty vehicle Test Cycle (WLTC) in the Vehicle Emission Laboratory at the European Commission Joint Research Centre Ispra, Italy. The median HNCO emissions obtained for the studied fleet over the WLTC were 1.4 mg km⁻¹ at 23 °C and 6 mg km⁻¹ at −7 °C. The fleet median NH₃ emission factors were 10 mg km⁻¹ and 21 mg km⁻¹ at 23 and −7 °C, respectively. The obtained results show that even though three-way catalyst (TWC), selective catalytic reduction (SCR), and NOx storage catalyst (NSC) are effective systems to reduce NOx vehicular emissions, they also lead to considerable emissions of the byproducts NH₃ and/or HNCO. It is also shown that diesel light-duty vehicles equipped with SCR can present NH₃ emission factors as high as gasoline light-duty vehicles at both, 23 and −7 °C over the WLTC. Therefore, with the introduction in the market of this DeNOx technology, vehicular NH₃ emissions will increase further.     

Effects of battery chemistry and performance on the life cycle greenhouse gas intensity of electric mobility

Lithium traction batteries are a key enabling technology for plug-in electric vehicles (PEVs). Traction battery manufacture contributes to vehicle production emissions, and battery performance can have significant effects on life cycle greenhouse gas (GHG) emissions for PEVs. To assess emissions from PEVs, a life cycle perspective that accounts for vehicle production and operation is needed. However, the contribution of batteries to life cycle emissions hinge on a number of factors that are largely absent from previous analyses, notably the interaction of battery chemistry alternatives and the number of electric vehicle kilometers of travel (e-VKT) delivered by a battery. We compare life cycle GHG emissions from lithium-based traction batteries for vehicles using a probabilistic approach based on 24 hypothetical vehicles modeled on the current US market. We simulate life-cycle emissions for five commercial lithium chemistries. Examining these chemistries leads to estimates of emissions from battery production of 194–494 kg CO₂ equivalent (CO₂e) per kWh of battery capacity. Combined battery production and fuel cycle emissions intensity for plug-in hybrid electric vehicles is 226–386 g CO₂e/e-VKT, and for all-electric vehicles 148–254 g CO₂e/e-VKT. This compares to emissions for vehicle operation alone of 140–244 g CO₂e/e-VKT for grid-charged electric vehicles. Emissions estimates are highly dependent on the emissions intensity of the operating grid, but other upstream factors including material production emissions, and operating conditions including battery cycle life and climate, also affect life cycle GHG performance. Overall, we find battery production is 5–15% of vehicle operation GHG emissions on an e-VKT basis.     

The problem of cold starts: A closer look at mobile source emissions levels

While the phenomenon of excess vehicle emissions from cold-start conditions is well known, the magnitude and duration of this phenomenon is often unclear due to the complex chemical processes involved and uncertainty in the literature on this subject. This paper synthesizes key findings regarding the influence of ambient and engine temperatures on light-duty vehicle (LDV) emissions. Existing literature, as well as analytical tools like the U.S. Environmental Protection Agency’s Motor Vehicle Emission Simulator (MOVES), indicate that while total vehicle emissions have dropped significantly in recent years, those associated with cold starts can still constitute up to 80% for some pollutant species. Starting emissions are consistently found to make up a high proportion of total transportation-related methane (CH₄), nitrous oxide (N₂O), and volatile organic compounds (VOCs). After 3–4 min of vehicle operation, both the engine coolant and the catalytic converter have generally warmed, and emissions are significantly lower. This effect lasts roughly 45 min after the engine is shut off, though the cooling rate depends greatly on the emission species and ambient temperature. Electrically (pre-)heated catalysts, using the bigger batteries available on hybrid drivetrains and plug-in vehicles, may be the most cost-effective technology to bring down a sizable share of mobile source emissions. Trip chaining (to keep engines warm) and shifting to non-motorized modes for shorter trips, where the cold start can dominate emissions, are also valuable tactics.     

Electric vehicle parking in European and American context: Economic,energy and environmental analysis

The transportation sector faces increasing challenges related to energy consumption and local and global emissions profiles. Thus, alternative vehicle technologies and energy pathways are being considered in order to overturn this trend and electric mobility is considered one adequate possibility towards a more sustainable transportation sector.In this sense, this research work consisted on the development of a methodology to assess the economic feasibility of deploying EV charging stations (Park-EV) by quantifying the tradeoff between economic and energy/environmental impacts for EV parking spaces deployment. This methodology was applied to 4 different cities (Lisbon, Madrid, Minneapolis and Manhattan), by evaluating the influence of parking premium, infrastructure cost and occupancy rates on the investment Net Present Value (NPV). The main findings are that the maximization of the premium and the minimization of the equipment cost lead to higher NPV results. The NPV break-even for the cities considered is more “easily” reached for higher parking prices, namely in the case of Manhattan with the higher parking price profile. In terms of evaluating occupancy rates of the EV parking spaces, shifting from a low usage (LU) to a high usage (HU) scenario represented a reduction in the premium to obtain a NPV = 0 of approximately 14% for a 2500 € equipment cost, and, in the case of a zero equipment cost (e.g. financed by the city), a NPV = 0 was obtained with approximately a 2% reduction in the parking premium. Moreover, due to the use of electric mobility instead of the average conventional technologies, Well-to-Wheel (WTW) gains for Lisbon, Madrid, Minneapolis and Manhattan were estimated in 58%, 53%, 52% and 75% for energy consumption and 66%, 75%, 62% and 86% for CO₂ emissions, respectively.This research confirms that the success of deploying an EV charging stations infrastructure will be highly dependent on the price the user will have to pay, on the cost of the infrastructure deployed and on the adhesion of the EV users to this kind of infrastructure. These variables are not independent and, consequently, the coordination of public policies and private interest must be promoted in order to reach an optimal solution that does not result in prohibitive costs for the users.     

Vehicle restrictions and CO2 emissions in Beijing – A simple projection using available data

The Beijing Government launched a new policy on restricting vehicle ownership in late 2010 to regulate the faster motorization and the excessive vehicular carbon dioxide (CO₂) emissions. In this paper, we first analyzed this policy and its effect on private passenger vehicle population. The private passenger vehicle population in Beijing from 2011 to 2020 was predicted under three different scenarios: no constraint (NC), current constraint (CC) and tighter constraint (TC). Then the assessment of vehicular emissions reduction benefits was made on the basis of private passenger vehicle population, vehicle kilometers traveled and CO₂ emission factors. It was projected that the CO₂ emissions in 2020 will reach 23.90, 15.55 and 13.23 million tons under NC, CC and TC respectively. The policy is very effective in controlling the faster motorization and reducing CO₂ emissions.     

The travel and environmental implications of shared autonomous vehicles,using agent-based model scenarios

Carsharing programs that operate as short-term vehicle rentals (often for one-way trips before ending the rental) like Car2Go and ZipCar have quickly expanded, with the number of US users doubling every 1–2 years over the past decade. Such programs seek to shift personal transportation choices from an owned asset to a service used on demand. The advent of autonomous or fully self-driving vehicles will address many current carsharing barriers, including users’ travel to access available vehicles.This work describes the design of an agent-based model for shared autonomous vehicle (SAV) operations, the results of many case-study applications using this model, and the estimated environmental benefits of such settings, versus conventional vehicle ownership and use. The model operates by generating trips throughout a grid-based urban area, with each trip assigned an origin, destination and departure time, to mimic realistic travel profiles. A preliminary model run estimates the SAV fleet size required to reasonably service all trips, also using a variety of vehicle relocation strategies that seek to minimize future traveler wait times. Next, the model is run over one-hundred days, with driverless vehicles ferrying travelers from one destination to the next. During each 5-min interval, some unused SAVs relocate, attempting to shorten wait times for next-period travelers.Case studies vary trip generation rates, trip distribution patterns, network congestion levels, service area size, vehicle relocation strategies, and fleet size. Preliminary results indicate that each SAV can replace around eleven conventional vehicles, but adds up to 10% more travel distance than comparable non-SAV trips, resulting in overall beneficial emissions impacts, once fleet-efficiency changes and embodied versus in-use emissions are assessed.     

CO2 emissions efficiency and marginal abatement costs of the regional transportation sectors in China

Nowadays, evaluating CO₂ emissions efficiency and its marginal abatement cost in transportation sectors has been a hot topic. However, while evaluating the CO₂ marginal abatement cost using data envelopment analysis approach, the weak disposability of CO₂ may imply positive abatement cost, which undoubtedly violates our common sense. To obtain non-positive marginal abatement cost, CO₂ emissions should be treated as an input. To reconcile this contradiction, this paper intends to propose a global, directional distance function model based on previous study to investigate the productivity, economic efficiency, CO₂ emissions efficiency, and marginal abatement cost of the China’s regional transportation sectors during 2007–2012. The results show that: (1) the productivity, economic efficiency and CO₂ emissions efficiency of different regions differ widely. More specifically, the coastal areas of south China perform better than the other areas in terms of productivity, economic efficiency, and CO₂ emissions efficiency. (2) Generally, the economic efficiency is greater than CO₂ emissions efficiency, which is relatively low in most areas. (3) A negative correlation is found between CO₂ emissions efficiency and its marginal abatement cost. For a 1% increase in CO₂ emissions efficiency, the CO₂ marginal abatement cost declines by 102 Yuan (in 2004 constant price). The results imply that improving CO₂ emissions efficiency plays an important role in marginal abatement cost reduction, and it also provides us a new approach to reduce abatement cost besides the technical progress.     

Communicating transportation carbon dioxide emissions information: Does gender impact behavioral response?

General concern and knowledge on climate change have been increasingly studied over the past decades. Gender differences have been found for general environmental concern and knowledge, but mixed findings exist with respect to climate change. In transportation, research has examined potential relations between environmental attitudes and transportation behavior, with mixed findings as well. Recently, the use of carbon dioxide (CO₂) emissions information to influence choice has been tested with women being found more willing to pay to reduce their personal impacts, suggesting that women are either more willing to change or that their response to information on climate change is stronger. However, those studies used CO₂ mass and studies that examined understanding of CO₂ information as a mass have found that people struggle to understand it. If concern and knowledge about climate change differ amongst individuals, then, according to theories such as the Transtheoretical Model, the type of information used to motivate choices is likely important. Using a unique data set (n = 236) it is possible to take a first look at how gender might affect concern, knowledge, and action in terms of transportation and climate change. Further, it is also possible to examine behavioral responses to transportation climate change information. Finally, an empirical analysis is conducted of the effect of how the information is presented might differ by gender. Thus, this work aims to investigate whether gender differences might contribute to the explanation of individual behavioral responses (from concern to action) in a transportation climate change context.