浅谈12缆三维地球物理深水勘探船的舾装设计

介绍了12缆三维地球物理深水勘探船舾装设计的主要特点,分别阐述了常规舾装设备和物探专业设备的技术状态,常规设备主要着重于因作业要求带来的常规设备特殊性布置和物探设备的系统性配备和布置,主要着重于本船的实际作业特点。     

上海西亚电子控制设备有限公司

本公司是研发、生产各类起得机械安全保护装置的专业企业，公司设计生产的“西亚”牌起重机力矩限制器、超载限制器、防碰装置，高度测控仪，技术先进、设计新颖、结构合理、性能可靠。拥有专业生产和检测设备，生产工艺完备。企业具有相关资质并通过质量体系认证。能设计制造不同工况的区域防碰控制系统，为船厂定制船台液压小车称重无线检测系统及船台绞车称重控制系统。     

线性绞车电控系统开发与应用

基于广州打捞局120 000 kN抬浮力打捞工程船配套4 500 kN线性绞车的技术要求,提出线性绞车电控系统设计方案。从线性绞车在打捞工程船中的作业工况、电控系统的通讯架构、线性绞车单台控制及远程联动的自动控制、人机界面操作等方面进行研究,介绍线性绞车电控系统的设计思路,为线性绞车在打捞沉船工作中的正确运用提供了理论支撑和技术保障。     

深水起重铺管船A&R绞车系统设计研究

基于对深水起重铺管船作业系统设备的设计及应用研究,重点阐述AR绞车的系统组成、结构特点、设计选型及控制系统原理。通过详细分析系统中的牵引绞车、储缆绞车、导向滑轮、补偿装置及PLC控制系统,提出一整套设计思路与方法,解决工程师在系统设计中遇到的诸多问题。     

65t扩展器牵引绞车设计

扩展器牵引绞车是物探船上的重要设备之一,用来对扩展器进行牵引和回收,其机械系统要求体积小,重量轻,且具有载荷大、可靠性高的工作特性.文章针对65t扩展器牵引绞车,分析了其技术和结构原理,对其进行结构设计,并通过仿真分析,验证了绞车结构的合理性,为18缆物探船的设计提供了技术保障.     

某舰作战系统综合摇控设备的设计

综合摇控技术是现代舰载作战系统的一项重要技术，综合性强、设计面广。某舰现代化改装工程中作战系统配置了ＹＫ－１型综合摇控设备，介绍其设计思想、主要功能、设备组成、特点和综合摇控技术的发展．     

深水双卷筒救生液压绞车的研制

本文对所设计研制的水下救生潜器与被救艇的对接系统作了介绍。研究解决了对接系统中的关键设备，绞车与钩子的技术难点，并且对所研制的设备进行模拟实船试验的试验结果作了阐述。试验表明，绞车的主要技术性能已满足规定指标的要求，钢绳，电缆能同步，平行收放，不发生缠绕，排绳方案可行，所研制的对接系统安全，可靠。     

简析船舶进出坞及引船系统关键工艺技术

船坞引船系统主要设备选型、工艺布置、设备主要参数选取是影响船舶进出坞作业流程的重要因素,引船系统的选型及布置需要综合考虑设计船型、工程投资、船舶进出坞作业效率等多方面。本文阐述了引船系统主要机构组成,说明了不同等级船坞所适应的引船系统配置方案,并列举了相关实例。针对国外某船厂项目,对引船系统主要设备(绞车)的参数选取进行论述,提供绞车两种不同的布置型式,即绞车布置于轨道延长线和绞车布置于坞首中部两种设计方案,从多个角度对两种布置方案进行比选。最后对该项目整体进出坞流程及人员配备进行阐述。本文在一定程度上总结了船坞引船系统设计经验,为相关船厂项目设计工作提供一定的参考意义。     

地质绞车系统的在线监测与故障诊断报警技术

监测与故障诊断作为保障地质绞车系统安全运行的重要技术，其合理运用与发展对于减少地质绞车的故障的发生具有十分重要的意义。对目前国内外地质绞车系统监测与故障诊断技术的研究现状进行总结与分析，并通过介绍地质绞车主要故障及传统处理方法，提出对这些故障进行在线监测与诊断的报警技术，最后提出地质科考绞车系统在线检测与故障诊断技术的应用前景与发展趋势。     

基于CBM的船舶设备健康管理系统

结合分析基于CBM的船舶设备健康管理系统及其国内外研究现状,设计了系统实施流程、技术和功能架构；通过开展状态监控技术、综合诊断技术以及健康评估技术的研究,进行综合状态评估，实现船舶设备健康管理。最后,从数据采集、状态评估、性能预测和维修决策支持等方面对实现系统的关键技术进行论述。基于CBM的船舶设备健康管理系统实现了对船舶设备健康状态及趋势的实时知悉,并对使用、维修活动的决策提供了辅助支持功能,从而降低设备维修费用,提高船舶设备使用效能。     

33rd International Conference on Ocean,Offshore and Arctic Engineering （OMAE2014）

正San Francisco,California,June 8-13,2014.OMAE 2014 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to:·meet and present advances in technology and its scientific support;·to exchange ideas and experiences whilst promoting technological progress and its application in industry·to promote international cooperation in ocean,offshore and arctic engineering.In line with the tradition of excellence of previous OMAE conferences,more than 900 technical papers are planned for presentation.Outreach for Engineers Specialty Forum This Specialty Forum is designed for students and professionals who may not be familiar with the Ocean and Offshore industry,as well as those who have just recently specialized in this field.     

Errata

正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors.     

Journal of Marine Science and Application 2014 Sum. Contents

正~~     

第34届海洋、离岸及极地工程国际会议(英文)

正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support;     

联合作战计划和执行系统

全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划：时间不限的精密预案计划生成作战计划、方案计划或职能计划；时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础，加速应付危机的能力。     

Recent progress on wave induced loading measurements in warships

Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form.     

The 11th International Conference on Hydrodynamics (ICHD 2014)

正19–24 October 2014 SingaporeCONFERENCE THEMES The overall aim of the ICHD Conference is to provide a forum for participants from around the world to review,discuss and present the latest developments in the broad discipline of hydrodynamics and fluid mechanics.The first International Conference on Hydrodynamics(ICHD)was initiated in 1994 in Wuxi,China.Since then,9 more ICHD conferences were held subsequently in Hong Kong,Seoul,Yokohama,Tainan,Perth,Ischia,Nantes,Shanghai and St Petersburg.Evidently the ICHD conference has become an important event among academics,researchers,engineers and operators,working in the fields closely related to the science and technology of hydrodynamics.The 11th ICHD will be held in Singapore in 2014.     

第十二届深水操作会议和展览会(英文)

正November 4-6,2014Moody Gardens HotelConvention Center/Galveston,TX The Deepwater Operations Conference and Exhibition is celebrating its 12th anniversary this year.This growing event will continue the tradition of excellence in addressing operational challenges involved in developing deepwater resources.We will return to the Moody Gardens Hotel and Convention Center on November 5-7,2014 in Galveston,Texas.     

Eastbound or westbound ?

In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama？
The answer is China South Port Group （Hong Kong, Shenzhen and Guangzhou）.     

Impact of regulation on the performances of long-distance transport services: A comparison of the different approaches in Sweden and Norway

Despite the many socio-economic similarities between Sweden and Norway, differences in jurisdiction, organisation, cooperation, and financing of long-distance passenger train and coach services have led to the development of four distinctively different ways of serving the markets. This paper describes how the train and coach markets have developed in the two countries, with emphasis on regulatory and industrial structure and a couple of performance variables.Looking at passenger rail, both countries separated infrastructure from operation over a decade ago. However, while Norwegian rail is characterised by an almost monopoly supplier, rail services in Sweden are partly decentralised to the responsibility of county authorities and are widely subjected to competitive tendering. The rest of the network is about to be opened up for on-the-track competition. Swedish Rail (SJ) has spent the last decades consolidating its core business (passenger rail) and sold out its other businesses. In contrast, the Norwegian state rail (NSB) has expanded its business to become a major bus operator and property owner, with extensions also into the Swedish market.The coach industry was more recently deregulated in both countries. The Swedish coach market is dominated by privately owned companies operating services to and from Stockholm. In Norway, state-owned NSB is a major coach operator on medium distance routes, and is also the largest partner of Nor-Way Bussekspress which totally dominates long-distance coach services. Further, the Norwegian coach market is characterised by cross-ownership and cooperation which has enabled an extensive route network which covers most of Norway.We find distinct differences in achievements in the two modes and in the two countries. Swedish rail services have succeeded in winning market shares and in renewing and developing both infrastructure and service levels to a greater extent than the Norwegian model. On the other hand, the Norwegian coach market seems to be more developed and efficient compared to its Swedish counterpart.The paper concludes with a discussion on the possible links between the different approaches and the performance observed, with the aim to stimulate further and more detailed research on some important issues.