ABSTRACTS

The present international system, balanced and imbalanced
Under the background of the thorough development of world multi-polarization and economic globalization, the structural changes are continuous and the intemational pattem adjustment is profoundly. Balance is relative and imbalance is absolute. The current pattem of international imbalances show both the economic frictions between countries, territorial or resources disputes and security interests and turf wars, and the country＇s economic model, the competition between different value orientation and shock. Balanced and unbalanced situation of the international pattem is mainly reflected in four aspects： First, the overall world economy moves towards equilibrium but not synchronous development and asymmetric performance,     

Research on vibration and near-field soundradiation of ring-ribbed cylindrical shell coated deadening and decoupling materials

The research on structural vibration and sound radiation of underwater ring-ribbed cylindrical shell, which is coated with a kind of deadening and decoupling materials, becomes a focus in recent years. This paper analyzes the problem on two aspects: model experiment and numerical calculation. The model experiment is carried out including three cases firstly, in which the structural vibration response and radiating acoustic field are measured respectively, and the results gained in these three cases are analyzed to discuss the effect of reducing structural vibration and radiating noise of the deadening and decoupling materials. The coupling FEM/BEM and the SEA methods are both used in numerical calculation, i.e. the arithmetic of the coupling FEM/BEM method is adopted to calculate the low frequency characteristics and the SEA method is adopted to calculate the medium-high frequencies characteristics of the model. By comparing experimental results with numerical calculation results, it is proved that the algorithm adopted in this paper is reasonable.     

Calculation of the Added Mass of a Liquid Tank＇s Bulkheads

The added mass coefficient and the water level indexformulas for the same-phase and anti-phase vibration of rectangularliquid tanks＇ bulkheads were derived based on dry mode theory.Three fluid-structure interaction numerical methods including FluidFEM and Fluid BEM were used in this case. The comparison ofnumerical and theoretical results by the present method shows thatANSYS/FluidS0 is more credible, the NASTRAN/Virtual MassMethod is more suitable for engineering calculations and results ofthe same-phase vibration by the present method is more accurate.     

Research on integrated navigation method for AUV

The principles of the SINS/DVL integrated navigation system are introduced, and the compass status accuracy is compared. When the heading is changed, the dead reckoning algorithm using the heading information of the SINS （Strapdown inertial navigation systems） and DVL （doppler velocity log） is adopted to substitute the SINS/DVL integrated system. The simulation results show that the method can improve the accuracy of integrated navigation system when AUV （autonomous underwater vehicle） is in motion.     

Virtual prototype simulation on underwater hydraulic impingement shovel

The virtual prototype technology is applied to the design of the hydraulic impingement shovel, which is to increase the reliability of the design. The work principle of hydraulic impingement shovel is expatiated, and its dynamic equations are established. The 3D model of virtual prototype is built by PRO/E. Then the couple between the mechanical body of prototype and the hydraulic system is completed by virtue of ADAMS. Finally, the simulation is made on the virtual prototype. The simulation results show that the design of underwater hydraulic impingement shovel is rational. The virtual prototype technology could lay sound foundation of successful manufacturing of physical prototype for the first time and offer highly effective and feasible means for the design and production of underwater equipments.     

Asymmetric regular sampling SPWM method based on tangent-secant midpoint approximation applied to intermediate frequency inverter power supply北大核心CSCD

［Objective］In order to reduce the switching frequency of an intermediate frequency inverter power supply, ensure the quality of the output waveform and realize digitalization easily, a SPWM sampling method based on a tangent-secant midpoint approximation is proposed. ［Methods］It is proven by deduction that the quantitative relationship of the natural sampling method can be approximated, and a Matlab/Simulink simulation model is built. The algorithm is designed and applied to an intermediate frequency inverter device, and the correctness of the proposed method is verified in the two aspects of simulation and experiment. ［Results］The simulation results show that the total harmonic distortion (THD) of the output waveform based on the tangent-secant midpoint approximation method is 2.64%, lower than the 3.99% of the symmetrical regular sampling method. The waveform quality of the tangent-secant midpoint approximation method is obviously better than that of the symmetrical regular sampling method, as it not only reduces the switching frequency but also takes into account the requirements of THD. ［Conclusions］SPWM sampling based on tangent-secant midpoint approximation is applied to the intermediate frequency power supply and is able to effectively overcome the shortcomings of the low-quality output waveform and high switching frequency of the symmetrical regular sampling method. Both theoretical analysis and engineering practice verify the rationality and correctness of the proposed method, and it can be widely extended to the field of intermediate frequency power supply installation. © 2022 Journal of Clinical Hepatology. All rights reserved.     

34th International Conference on Ocean,Offshore and Arctic Engineering （OMAE2015）

OMAE2015 is the ideal forum for researchers, engineers, managers, technicians and students from the scientific and industrial communities from around the world to：
meet and present advances in technology and its scientific support;
to exchange ideas and experiences whilst promoting technological progress and its application in industry
to promote international cooperation in ocean, offshore and arctic engineering.     

Dynamic coupled analysis of the floating platform using the asynchronous coupling algorithm

This paper discusses the numerical modeling of the dynamic coupled analysis of the floating platform and mooring/risers using the asynchronous coupling algorithm with the purpose to improve the computational efficiency when multiple lines are connected to the platform. The numerical model of the platform motion simulation in wave is presented. Additionally, how the asynchronous coupling algorithm is implemented during the dynamic coupling analysis is introduced. Through a comparison of the numerical results of our developed model with commercial software for a SPAR platform, the developed numerical model is checked and validated.     

船首形状对自由液面水下航行体阻力影响的试验研究（英文）

In this paper, towing tank experiments are conducted to study the behavior of flow on a model of the underwater vehicle with various shapes of bows, i.e. tango and standard bows in free surface motion tests. The total resistances for different Froude numbers are considered experimentally. The towing tank is equipped with a trolley that can operate in through 0.05–6 m/s speed with ±0.02 m/s accuracy. Furthermore, the study is done on hydrodynamic coefficients i.e. total, residual and friction resistance coefficients, and the results are compared. Finally, the study on flow of wave fields around bows is done and wave filed around two bows are compared. The Froude number interval is between 0.099 and 0.349. Blockage fraction for the model is fixed to 0.005 3. The results showed that the residual resistance of the standard bow in 0.19 to 0.3 Froude number is more than the tango bow in surface motion which causes more total resistance for the submarine. Finally, details of wave generated by the bow are depicted and the effects of flow pattern on resistance drag are discussed.     

Numerical modeling of exhaust smoke dispersion for a generic frigate and comparisons with experiments

The exhaust smoke dispersion for a generic frigate is investigated numerically through the numerical solution of the governing fluid flow, energy, species and turbulence equations. The main objective of this work is to obtain the effects of the yaw angle velocity ratio and buoyancy on the dispersion of the exhaust smoke The numerical method is based on the fully conserved control-volume representation of the fully elliptic Navier-Stokes equations. Turbulence is modeled using a two-equation （k-ε） model The flow visualization tests using a 1/100 scale model of the frigate in the wind tunnel were also carried out to determine the exhaust plume path and to validatc the computational results. The results show that down wash phenomena occurs for the yaw angles between ψ=10° and 20°. The results with different exhaust gas temperatures show that the buoyancy effect increases with the increasing of the exhaust gas temperature. However, its effect on the plume rise is less significant in comparison with its momentum. A good agreement between the predictions and experiment results is obtained.     

Mathematical modelling of response amplitude operator for roll motion of a floating body: Analysis in frequency domain with numerical validation

This paper investigates mathematical modelling of response amplitude operator （RAO） or transfer function using the frequency-based analysis for uncoupled roll motion of a floating body under the influence of small amplitude regular waves. The hydrodynamic coefficients are computed using strip theory formulation by integrating over the length of the floating body. Considering sinusoidal wave with frequency （ω ） varying between 0.3 rad/s and 1.2 rad/s acts on beam to the floating body for zero forward speed, analytical expressions of RAO in frequency domain is obtained. Using the normalization procedure and frequency based analysis, group based classifications are obtained and accordingly governing equations are formulated for each case. After applying the fourth order Runge-Kutta method numerical solutions are obtained and relative importance of the hydrodynamic coefficients is analyzed. To illustrate the roll amplitude effects numerical experiments have been carried out for a Panamax container ship under the action of sinusoidal wave with a fixed wave height. The effect of viscous damping on RAO is evaluated and the model is validated using convergence, consistency and stability analysis. This modelling approach could be useful to model floating body dynamics for higher degrees of freedom and to validate the result.     

Bucket Group Effect of the Composite Multi-bucket Structure

As a novel type of foundation in beach and shallow sea,the bucket structure is especially suitable for complex conditionssuch as soft clay ground and the worse types of sea environments.In this paper, the bearing capacity of a multi-bucket structure isstudied by experiments with a single bucket and four-bucketfoundation in a saturated sand layer. Based on the experimentaldata and numerical analysis results, the bearing capacity behaviorand the bucket group effect are compared and analyzed.Furthermore, some influential factors, such as the soil type, theratio of length to diameter L/D, the ratio of the bucket spacing tothe bucket diameter S/D, and the bucket number are introduced andtheir effects on the multi-bucket structural capacity are investigatedThe vertical static capacity adjustment factor is introduced toevaluate the bucket group effects of the multi-bucket foundation.     

An integrated GPS/DR navigation system for AUV

GPS/Dead-reckoning navigation system for autonomous underwater vehicle （AUV） is introduced, which includes navigation overall architecture, hardware and software structure. Dead-reckoning theory is presented in details. And the strong tracking Kalman filter and Singer model are applied to handle the imprecise navigation mode, which can improve the navigation system＇s precision and reliability. Finally, the sea experiments which include autonomous search mission in an unknown area and long distance motion are conducted to demonstrate the reliability and feasibility of the navigation system.     

关于十五届ITTC有限风区海浪谱表达式的一个注记(英文)

This is based on the average JONSWAP spectrum as recommended by the6th ISSC,in which γ=3.3 and the parameters α,ω_m are expressed in termsof significant wave height((?)_W)_(1/3) and average period T_1.However,it is men-tioned in〔2〕that this expression of the spectrum is approximate with respect to     

驱逐舰烟气排放过程数值仿真及同模型试验比较研究(英文)

The exhaust smoke dispersion for a generic frigate is investigated numerically through the numerical solution of the governing fluid flow, energy, species and turbulence equations. The main objective of this work is to obtain the effects of the yaw angle, velocity ratio and buoyancy on the dispersion of the exhaust smoke. The numerical method is based on the fully conserved control-volume representation of the fully elliptic Navier-Stokes equations. Turbulence is modeled using a two-equation(k-ε) model. The flow visualization tests using a 1/100 scale model of the frigate in the wind tunnel were also carried out to determine the exhaust plume path and to validate the computational results. The results show that down wash phenomena occurs for the yaw angles between ψ =10° and 20°. The results with different exhaust gas temperatures show that the buoyancy effect increases with the increasing of the exhaust gas temperature. However, its effect on the plume rise is less significant in comparison with its momentum. A good agreement between the predictions and experiment results is obtained.     

Design of underwater robot lines based on a hybrid automatic optimization strategy

In this paper, a hybrid automatic optimization strategy is proposed for the design of underwater robot lines. Isight is introduced as an integration platform. The construction of this platform is based on the user programming and several commercial software including UG6.0, GAMBIT2.4.6 and FLUENT12.0. An intelligent parameter optimization method, the particle swarm optimization, is incorporated into the platform. To verify the strategy proposed, a simulation is conducted on the underwater robot model 5470, which originates from the DTRC SUBOFF project. With the automatic optimization platform, the minimal resistance is taken as the optimization goal;the wet surface area as the constraint condition; the length of the fore-body, maximum body radius and after-body＇s minimum radius as the design variables. With the CFD calculation, the RANS equations and the standard turbulence model are used for direct numerical simulation. By analyses of the simulation results, it is concluded that the platform is of high efficiency and feasibility. Through the platform, a variety of schemes for the design of the lines are generated and the optimal solution is achieved. The combination of the intelligent optimization algorithm and the numerical simulation ensures a global optimal solution and improves the efficiency of the searching solutions.     

Numerical investigation of mooring line damping and the drag coefficients of studless chain links

The chain/wire rope/chain combination is a commonchoice for mooring offshore floating platforms. However, data ofthe drag coefficients of chain links are rather limited, resulting inuncertainties with the calculations of the drag force, and hence thedamping of the mooring system. In this paper, the importance of theselection of the drag coefficient is first investigated. Thecomputational fluid dynamics （CFD） method is then used todetermine the drag coefficients of a studless chain under steadyflows. Numerical model validation is first completed by simulatinga smooth circular cylinder under steady flows. In particular, theperformance of different turbulence models is assessed through thecomparisons between the calculations and the experimental results.The large eddy simulation （LES） model is finally selected for thesimulation of steady flows past a chain. The effects of the Reynoldsnumber on the drag coefficient of a stud-less chain is also studied.The results show that the calculated drag coefficients of a stud-lesschain are fairly consistent with the available experimental data.     

A study on Implementation of Automatic Gatehouse System in Container Terminal

As we know,Gatehouse (Gate-In /Gate-Out) business is one of the most important sections in the operation of container terminal(CT).On one hand,Gate-In is the first checkpoint for all export container cargoes to CTs,where we should make clear the related responsibilities of container cargoes between shippers and CTs.On the other hand,Gate-Out is the last checkpoint for all import cargoes from CTs,where the relevant liabilities of container cargoes should be distinguished by CTs and consignees,too.The CT where I work now is in Europe and ourlabor costs are much higher than those in China.In this case,in January,2010,we began to study and designanautomatic gatehouse system(AGS) in order to lower relevant costs by accelerating the passage of containers through Gate-In and Gate-Out and reducing the number of container inspectorsas well.     

如何正确估量一艘集装箱班轮的箱位容量

What is ordinarily assumed is that the Ioadable TEUcapacity of a full container ship is a constant figure,which is close to the designed figure provided by the ship-yard where the ship had been designed/ built. But in factthe said figure is not a constant one and is variable in eachvoyage to each ship. If some carrier overestimated this figure,     

Distributed and Redundant Design of Ship Monitoring and Control Network

The world trend in ship automation is to integrate the monitoring, intelligent control and systematic management of the instruments and equipments both on bridge and in engine room. The paper presents a design scheme of the ship integrated monitoring and operating system based on two layers distributed and redundant computer network. The lower layer network is the field bus network connected mainly by CAN bus; the upper one is the PC local network in TCP/IP protocol, which consisted of a database server, monitoring and operating computers, industrial computers and a set of switches. Distributed schemes are fully applied to both software and hardware. This paper specifically describes the composition, software distribution and redundant technology of the upper local network and gives some important sample codes for the implement of the redundant and distributed design. The technologies here have been proved in the many applications and it may be applied to other industrial fields.