深水起重铺管船横摇运动性能分析(英文)

For a large floating vessel in waves,radiation damping is not an accurate prediction of the degree of roll unlike other degrees of freedom motion.Therefore,to get the knowledge of roll motion performance of deepwater pipelay crane vessels and to keep the vessel working safety,the paper presents the relationship between a series of dimensionless roll damping coefficients and the roll response amplitude operator(RAO).By using two kinds of empirical data,the roll damping is estimated in the calculation flow.After getting the roll damping coefficient from the model test,a prediction of roll motion in regular waves is evaluated.According to the wave condition in the working region,short term statistics of roll motion are presented under different wave parameters.Moreover,the relationship between the maximal roll response level to peak spectral wave period and the roll damping coefficient is investigated.Results may provide some reference to design and improve this kind of vessel.     

海上风电浮船分体安装运动响应数值仿真分析

本文采用数值仿真手段分析浮吊船的运动响应以确定采用浮吊船进行风电机组分体安装的可行性。利用基于边界元法的水动力学数值仿真的手段，计算强峰1800和苏连海起重08两艘起重船的浮体运动响应RAO。采用频域谱分析的方法，计算随机波条件下两船吊钩位置的垂荡运动响应谱，并通过波浪谱统计规律确定船舶的最大运动响应以及加速度响应，以确定风电机组分体安装的可行性。     

气动载荷对半潜式海上风机运动响应的影响分析

以DeepCwind海上风机为研究对象,利用有限元软件ANSYS AQWA进行风机频域水动力数值仿真分析,得到水动力参数以及幅频响应曲线,将得到的水动力参数导入到FAST软件中,对风机气动-水动-锚泊系统的时域耦合运动分析。在此基础上,讨论了气动载荷对于半潜式风机运动响应的影响。结果表明,气动载荷对于半潜式风机运动响应的影响较大且不可忽略,横摇,横荡以及首摇运动随着气动载荷的增大而增大,垂荡运动随着气动载荷的增大而减小,风作用在叶片上所产生的气动阻尼削弱了垂荡运动,增强了横荡、横摇和首摇运动。     

波浪作用下月池开口对钻井船水动力的影响

结合模型试验与频域数值计算结果,分析月池对船体水动力性能的影响,并对模型试验与数值计算的RAO、月池敞开和封闭的RAO、运动统计结果和附加质量系数进行对比。分析结果显示:月池开口会增大横摇和垂荡运动幅值,并且减小船体的横摇固有周期;当外部激励使月池发生共振时,月池内流体产生的附加质量会发生剧烈变化。因此,月池开口对船体水动力性能会产生一定负面影响,作业时,应当避免发生共振现象。     

多点系泊定位FDPSO船体水动力性能数值模拟和模型试验研究(英文)

由于中国南海海域海况十分恶劣,浮式钻井生产储油轮(FDPSO,Floating,Drilling,Production,Storage and Offloading vessel)定位方式的研究是海洋工程界值得关注的课题。文章采用数值模拟和模型试验的方法对多点系泊FDPSO水动力性能开展研究。数值模拟包括FDPSO船体频域水动力性能计算和船体/锚链时域耦合分析。船体频域水动力性能计算得到了水动力系数,波浪力和运动幅值响应算子;时域耦合数值分析得到了中国南海海域一年一遇海况和百年一遇海况下船体六自由度运动时历。模型试验在上海交通大学海洋工程深水池开展,包括静水衰减试验,白噪声试验和不规则波试验。对数值计算结果和模型试验结果进行了比较,验证了数值结果的准确性,并对多点系泊FDPSO在中国南海海域的水动力性能进行了研究。     

基于AQWA计算规则波中新型海工船的运动响应

本文应用三维势流理论的水动力软件AQWA分析一种新型工程船舶在波浪中的运动响应,新型船为改造的波兰中型集装箱船B-573,设计搭载Pram型艉和POD吊舱式推进系统的新型海工船.本文计算此船在规则波中不同浪向角条件下的六个自由度的频域和时域的运动响应,得到在不同浪向角下船体的响应振幅算子RAO,计算船舶顺浪下不同船速的垂荡RAO以及纵荡、垂荡和纵摇三个自由度的一阶、二阶波浪力,分析结果显示该新船型具有良好的耐波性.     

波能转换型浮式防波堤的水动力性能研究（英文）

The integration of wave energy converters(WECs) with floating breakwaters has become common recently due to the benefits of both cost-sharing and providing offshore power supply. In this study, based on viscous computational fluid dynamics(CFD) theory, we investigated the hydrodynamic performances of the floating box and Berkeley Wedge breakwaters, both of which can also serve as WECs. A numerical wave flume model is constructed using Star-CCM+software and applied to investigate the interaction between waves and wave energy converters while completing the verification of the convergence study of time and space steps. The effects of wave length on motion response and transmission coefficient of the floating box breakwater model are studied. Comparisons of our numerical results and published experimental data indicate that Star-CCM+ is very capable of accurately modeling the nonlinear wave interaction of floating structures, while the analytical potential theory overrates the results especially around the resonant frequency. Optimal damping can be readily predicted using potential flow theory and can then be verified by CFD numerical results. Next, we investigated the relationship between wave frequencies and various coefficients using the CFD model under optimal damping, including the motion response, transmission coefficient, reflection coefficient,dissipation coefficient, and wave energy conversion efficiency. We then compared the power generation efficiencies and wave dissipation performances of the floating box and Berkeley Wedge breakwaters. The results show that the power generation efficiency of the Berkeley Wedge breakwater is always much higher than that of the floating box breakwater. Besides, the wave dissipation performance of the Berkeley Wedge breakwater is much better than that of the floating box breakwater at lower frequency.     

新型捕能消波浮式防波堤数值模拟与试验研究

采用数值模拟和物理试验研究方法,研究了新型捕能消波浮式防波堤savonius型桨叶两种布置形式的捕能及消波性能。利用STAR-CCM+数值仿真软件,通过调用重叠网格、时间二阶离散、增加数值迭代的方法,建立了浮式防波堤三维水动力模型并进行数值模拟。研制了该防波堤物理试验系统,测试浮式防波堤捕能消波性能,综合分析数值模拟与物理试验的结果。结果表明,该新型浮式防波堤在桨叶转动频率与波浪频率相近时捕能功率最大,桨叶并列布置方式的消波性能比桨叶垂直布置方式更为优越。     

Dynamic interaction of parallel moving ships in close proximity

Nowadays,there are many studies conducted in the field of marine hydrodynamics which focus on two vessels traveling and floating in sufficiently close proximity to experience significant interactions.The hydrodynamic behavior of parallel moving ships in waves is an interesting and important topic of late.A numerical investigation has been carried out for the prediction of wave exciting forces and motion responses of parallel moving ships in regular waves.The numerical solution was based on 3D distribution technique and using the linear wave theory to determine the exciting forces and ship＇s motion.The speed effects have been considered in the Green function for more realistic results.The numerical computations of wave exciting forces and motion responses were carried out for a Mariner and Series 60 for the purpose of discovering different Froude numbers and different separation distances in head sea conditions.Based on the numerical computations,it was revealed that the sway,roll and yaw have a significant effect due to hydrodynamic interaction.     

复杂地形影响下的波浪与穿透水面的物体相互作用的数值研究（英文）

In this paper, wave-body interactions under the effects of complex topography are investigated numerically by a two-phase incompressible Reynolds-Averaged Navier-Stokes(RANS) solver in OpenFOAM. A submerged bottom-standing structure is distributed below the floating body, and the effects of the water depth and top width of the submerged structure on wave-body interactions are studied. The results show that the submerged structure can affect wave loads and roll motion. The vertical force can be amplified on the fixed body when the water depth of the submerged structure is smaller than half of the water depth of the body. The top width significantly affects the vertical force when the top width is smaller than the incident wave length and larger than the body width. For the free-rolling body, roll amplitude can be increased when the ratio of the incident wave length to the water depth of the submerged structure is large enough. On the resonance condition, roll amplitude is slightly reduced by the submerged structure. The effects of the top width on roll amplitude are remarkable when special conditions are fulfilled.     

Nonlinear hydrodynamic responses of submerged moving payload in vicinity of a crane barge in waves

The wave interaction with a submerged cylindrical payload subjected to constrained motions in presence of a nearby floating crane barge is investigated in the three-dimensional numerical wave tank using a fully nonlinear potential flow model in the time domain. Numerical simulations are carried out to investigate the hydrodynamic features of this submerged payload under pendulum motion in water waves as well as while it moves towards the sea bed at a constant vertical velocity. It is known that the presence of multiple side by side floating bodies in waves can create significant drift motion. In the present study the similar drift motion is observed for the side by side floating barge and submerged payload and it appears that the submerged payload under constrained motions may face a very large mean drift motion of nearly seven times that of the incident wave amplitude in the beam sea upstream condition. Emphasis is also given towards investigating and understanding the influences of natural frequency of the payload and shielding effect due to the presence of the floating barge. It is found that natural frequency coupled with shielding effect generates remarkable low frequency components in payload responses both in the head sea and the beam sea situations. The effect of different cable lengths, wave maker frequencies and downward moving velocities on payload responses under several geometric setups are studied and compared, and interesting features such as increased low frequency movement of the payload near the natural frequency region and existence of considerable low frequency motions even at a greater depth (while the payload is quite below the free surface) are observed.     

拖航状态的自升式平台桩腿强度分析

为实现拖航状态的自升式平台桩腿强度分析,借助DNV系列软件包,以频率响应分析的方法对自升式海洋平台拖航状态时的横摇和纵摇固有周期进行了计算;以频响分析中各相应固有周期的RAO值和相关规范规定的6度单幅横摇或纵摇值确定拖航的计算波高,并进行拖航状态时的准静态结构分析;最后采用API-AISC-WSD软件来完成桩腿自身结构的屈服和屈曲强度校核,从而为自升式平台确定恰当的桩腿系固和拖航方案提供依据。     

一种新型海洋能发电轮机水动力特性研究

摘 要：海洋发电轮机所处的海上作业环境恶劣，设备易发生故障且维修困难。基于三维势流理论，并结合ANSYS-AQWA软件，对风、浪、流荷载联合作用下的海洋能发电轮机的水动力特性进行研究，得出了发电轮机在工作工况及极限工况下的运动响应特性。结果表明，浮体运动响应幅值的最大值分别发生在遭遇艏斜浪和横浪时；其中极限工况下的运动响应幅值是工作工况下的3-10倍。该装置经过循环改型后水动力性能良好，能够满足实际的工程应用，本文提出的计算方法可以作为一种快速预报装置水动力特性的校核手段，满足工程设计阶段的需求。     

复杂形状海洋浮体水动力系数计算

网格划分是水动力计算的关键环节,文中针对复杂形状海洋浮体提出了一种湿表面网格划分方法.对于有复杂首尾结构的浮体,用型线重构的方式在首尾生成曲面构成所需要的截面线,将通用建模工具和NURBS曲线拟合相结合,生成相贯结构的相交线;然后,用分片法生成浮体湿表面及内自由面网格,并独立表达各自的速度势以处理不规则频率现象,进而进行水动力系数计算.计算结果表明,上述处理方式很适合复杂形状海洋浮体水动力系数的计算.     

深海系泊浮体物面非线性时域耦合动力分析

文章基于三维时域势流理论和弹性细长杆理论,研究并提出了深海系泊浮体物面非线性时域耦合动力分析方法。该方法采用时域物面非线性理论方法在瞬态位置直接时域模拟系泊浮体所需水动力,结合有限元方法计算系泊缆索的动力响应,利用异步耦合方法实现浮体和系泊缆索的时域耦合动力求解。既满足系泊浮体时域水动力耦合,又满足系泊浮体和系泊缆索动力耦合。通过对二阶非线性不规则波作用下深海系泊半潜式平台的时域耦合响应特性进行研究,将不同海况下物面非线性时域耦合静力响应和动力响应与间接时域耦合动力响应的三种方法计算结果进行比较。研究结果表明,系泊缆索动力响应明显,平台瞬态空间位置对垂荡低频运动影响较大,有必要在平台瞬时湿表面采用动力响应方法进行深海系泊浮体时域耦合响应分析。     

高速轻型穿浪双体船纵向运动改善措施研究

针对在改善高速轻型穿浪双体船(WPC)迎浪中波长与船长接近时纵向运动幅度较大的缺点,采用了理论计算与模型试验相结合的方法,对250 t级穿浪双体船开展了水翼改善纵向运动的理论和试验研究,分析了水翼形式、尺度和安装位置等对纵向运动的影响规律。数值计算和试验结果的比较表明,计及水翼—船体水动力干扰影响的切片理论可满足WPC加水翼后波浪中纵向运动计算的需要,但在纵向运动响应峰值处数值计算结果偏高。模型试验表明,250 t级WPC加装水翼后,迎浪纵摇和垂荡有义幅值可减少20%～30%。     

考虑浮体弹性变形的锚泊系统分析方法

传统的锚泊系统分析方法一般是假设结构物为刚性不可变形的,这种假设对于常规海洋结构物的锚泊系统分析,其精度是可以接受的,然而对于弹性体(比如超大型浮体)来说,这种浮体刚性的假设显然是不合理的.本文基于摄动理论,分别给出了锚泊浮体(同时包括弹性体和刚性体)和锚泊系统的一阶运动方程.分别用三维水弹性理论和Goodman-Iance法求解浮体的动力响应和锚泊线的运动,并给出了两者之间的协调关系.通过数值算例分析表明,对于超大型浮体,其弹性特性对锚泊系统特性的影响是不可忽略的.     

海洋浮式平台气隙的数值预报

以海洋浮式平台为研究对象,运用三维势流理论结合半经验Morison方程的方法计算了规则波下的水动力系数以及运动响应传递函数,并运用短期预报方法对平台气隙进行了分析。研究结果表明,其水动力性能与波浪频率密切相关,平台的气隙短期预报显示波浪在浮箱首尾部分负气隙严重,即有强烈的波浪砰击现象,平台结构设计时要充分考虑到该区域的波浪砰击载荷。     

基于切片理论的波浪载荷直接计算

提出了波浪载荷直接计算方法。该方法基于线性切片理论,在频域范围内进行。通过水动力分析得出波浪载荷的响应幅值算子,采用统计方法对波浪载荷进行长期预报,并将线性波浪载荷预报结果进行非线性修正,以模拟实际波浪载荷的非线性效应。最后以某一船型为例,结合IACS推荐的波浪谱和波浪散布图以及超越概率,采用该方法进行了计算并将计算结果与规范值进行了比较。     

Calibration of response amplitude operators based on measurements of vessel motions and directional wave spectra

A vessel's response to waves is dependent on a large number of parameters, some of which are both frequency and direction dependent. To predict vessel response, these parameters are used to construct response amplitude operators (RAOs) that act as transfer functions between the directional wave spectra and the motion spectra of the vessel. In particular situations, however, vessel motions predicted using RAOs calculated with general-purpose radiation-diffraction codes and measured wave spectra are found to deviate from measured vessel responses. To address this problem, a methodology for calibrating RAOs based on measurements of the directional wave spectra and vessel motions is proposed. Use is made of a vector fitting method through which the frequency dependent hydrodynamic properties of the vessel can be approximated by a ratio of two polynomials, thus greatly reducing the number of parameters that need to be calibrated. The reduced set of parameters is subsequently related to previously identified causes of RAO inaccuracy in order to arrive at optimization algorithms for identifying more accurate RAOs from the measurements. It is shown that the RAOs can be improved with accuracy in situations where the discrepancies are caused by imprecise estimates for the vessel's radii of gyration, center of gravity, or viscous damping. When the discrepancies in the RAOs are related to the potential mass, damping and wave forces, however, the problem becomes highly non-convex and it is not possible to find a unique RAO that satisfies the data.