共查询到20条相似文献,搜索用时 695 毫秒
1.
夹层板是一种比刚度大、比强度高的结构形式,根据文献将典型加筋板等效为最优夹层板,采用非线性数值方法,对爆炸冲击波作用下方形蜂窝夹层板及填充超弹性材料的方形蜂窝夹层板响应进行数值计算,分析填充超弹性材料夹层对夹层板各部位加速度、速度及位移响应的影响,对比不同爆距下夹层板响应,并分析填充超弹性材料对夹层板吸能的影响。从计算结果可知填充超弹性材料可有效减小爆炸载荷作用下夹层板的响应,减小夹层板面、背板间相对变形。 相似文献
2.
夹层板是一种比刚度大、比强度高的结构形式,根据文献将典型加筋板等效为最优夹层板,采用非线性数值方法,对爆炸冲击波作用下方形蜂窝夹层板及填充超弹性材料的方形蜂窝夹层板响应进行数值计算,分析填充超弹性材料夹层对夹层板各部位加速度、速度及位移响应的影响,对比不同爆距下夹层板响应,并分析填充超弹性材料对夹层板吸能的影响。从计算结果可知填充超弹性材料可有效减小爆炸载荷作用下夹层板的响应,减小夹层板面、背板间相对变形。 相似文献
3.
4.
5.
采用密度泛函理论(Density Functional Theory,DFT)中的B3LYP杂化密度泛函,在LANL2DZ赝势基组水平上对Os0n,±(n=2~5)团簇的几何构型、振动频率和稳定性进行了理论研究.结果表明,Os0n,±(n=2~5)团簇的稳定构型中三聚物是三角形结构,四聚物以正方形最为稳定,五聚物存在两个竞争的基态构型,Os5团簇的结合能最大,热力学稳定性最好. 相似文献
6.
本文研究船闸输水阀门由程序控制,按曲线方程开启,使输水流量从三角形分布变成梯形分布,由不稳定流变成较长时间的稳定流,能显著改善水流条件和停泊条件。 相似文献
7.
8.
9.
该文从相位角度出发,采用CFD的数值方法研究简谐激励下液体晃荡整体荷载与液舱运动的相位关系。首先,通过模型实验验证数值方法的可靠性,然后,以横荡激励下的二维矩形舱晃荡为例,研究不同载液率工况下,相位差和晃荡整体荷载幅值随激励频率的变化关系。结果表明:基于VOF法的数值模拟能较好地模拟液舱内液体晃荡;在自由面共振频率附近(0.8 f0~1.2 f0),相位差随激励频率增加而增大;频率比相同时,相位差随载液率的升高而增大;相位差90°时,相位差对应频率低于共振频率,且与晃荡荷载最大值对应频率基本相等。 相似文献
10.
11.
舱室内战斗部爆炸产生的冲击波是舱室结构板架承受的主要载荷之一,舱室内爆冲击波在舱室内部将发生多次反射,并在舱室内部形成持续时间较长的准静态压力,在此过程中舱室板架承受多次冲击波反射载荷。本文以舱室典型加筋板为对象进行夹层板概念设计,选取面板厚度、背板厚度、夹芯壁厚及夹芯间距4个参数作为试验参数,以抗爆综合评价指标最小为目标,采用正交试验优化设计方法得到该加筋板结构在舱室内爆冲击波载荷作用下最优抗爆性能的夹层板结构,并对比最优夹层板与普通加筋板在舱室内爆载荷作用下的响应特征。研究表明,经过优化设计后的夹层板具有更好抵抗冲击波载荷的能力,正交试验设计能较好适用于夹层板结构优化设计。 相似文献
12.
Stephen Fletcher Midori Kawabe Sonja Rewhorn Chun Knee Tan Andrew Emery Kazumi Wakita 《Coastal management》2013,41(2):154-169
This article reports on the Learning Exchange Programme (LEP) model of capacity building for Integrated Coastal Management (ICM) professionals. The LEP model of capacity building involves international group-based exchange visits during which a structured program of experiential learning events is undertaken to meet specific capacity gaps. An application of the LEP model in Japan and the United Kingdom is presented and evaluated, which shows that while refinements could be identified, a group-based, tailored exchange model focused on filling specific capacity gaps is an effective model of capacity building for ICM. 相似文献
13.
刘旭东 《江苏科技大学学报(社会科学版)》2006,20(2):42-46
为了进一步研究磁通受交流驱动的性质,对在二维周期性钉扎系统中的磁通格子在交、直流电驱动下的动力学性质和伏安特性作了数值模拟。结果表明,在直流伏安特性曲线上出现了相锁定台阶。结构因子的数值证明沿着该台阶的磁通格子存在运动序。相锁定与交流频率和交流振幅有关,与磁通间的互作用、与磁通密度和钉扎密度等都有关。 相似文献
14.
应用有限元方法通过求解原始变量的二维不可压粘性流体的N-S方程和管线振动方程,数值模拟了近底管线的绕流及漩涡脱落引起的管线振动,采用ALE方法解决因管线振动引起的动网格问题和流固耦合问题。数值模拟了雷诺数90相似文献
15.
针对目前的罗兰C接收机在抑制窄带干扰方面的缺陷,在NBI频率点检测技术的基础上,对零限幅陷波技术抑制NBI、修正的零限幅陷波技术抑制NBI、自适应干扰对消技术抑制NBI进行了分析和仿真,并对仿真结果进行了对比讨论。 相似文献
16.
在周期振子上等间距布置橡胶减振器吸振器,形成局域共振周期振子结构,揭示了周期结构中布拉格带隙和局域共振带隙以及两种带隙的共存。采用传递矩阵法推导了周期单元的导纳矩阵,为求解周期结构中波的传播系数和动态响应奠定了理论基础。数值讨论了周期振子结构参数对两种LR和Bragg带隙边界频率的影响。推导了在任意冲击载荷作用下,周期振子结构的动态响应特征。对周期振子隔振器的冲击性能的研究为周期振子结构在低频和高频振动控制领域的应用提供参考。 相似文献
17.
《船舶与海洋工程学报》2021,(2)
Sloshing is relevant in several applications like ship tanks,space and automotive industry and seiching in harbours.Due to the relationship between ship and sloshing motions and possibility of structural damage,it is important to represent this phenomenon accurately.This paper investigates sloshing at shallow liquid depths in a rectangular container using experiments and RANS simulations.Free and forced sloshing,with and without baffles,are studied at frequencies chosen specifically in proximity to the first mode natural frequency.The numerically calculated free surface elevation is in close agreement with observations from experiments.The upper limit of the resonance zone,sloshing under different filling depths and roll amplitudes and sloshing with one,two and four baffles are also investigated.The results show that the extent of the resonance zone is reduced for higher filling depth and roll amplitude.It is also found that the inclusion of baffles moves the frequency at which the maximum free surface elevation occurs,away from the fundamental frequency.Finally,a submerged baffle is found to dissipate more energy compared to a surface piercing baffle and that the effect of several submerged baffles is similar to that of a single submerged baffle. 相似文献
18.
Chang Doo Jang Tae Hoon Kim Dae Eun Ko Thomas Lamb Yun Sok Ha 《Journal of Marine Science and Technology》2005,10(4):211-216
In a shipyard, line heating and triangle heating are two major processes carried out by skilled workers to form curved plates
in various shapes under various heating conditions. There have been many studies on line heating, but triangle heating has
rarely been studied owing to its complicated heating process with irregular multiheating paths and highly concentrated heat
input. Triangle heating is the most labor-intensive job. Hence, it is essential for most shipyards to study the automation,
as well as the improvement, of the triangle heating process in order to increase hull-forming productivity. In this study,
a pioneering attempt to simulate triangle heating was made. A circular disk-spring model is proposed as an analysis model
for the elastoplastic procedure of triangle heating, and the inherent strain method is also used to analyze the deformation
of plates. The results of the simulation were compared with those of experiments and showed good agreement. It is shown that
the present approach and the model used in this study are effective and efficient for simulating triangle heating for the
steel plate forming process in shipbuilding. 相似文献
19.
对复合材料舵和传统钢质舵的振动特性进行试验研究和对比分析.通过设计相关试验模型,对复合材料舵和钢质舵的前三阶固有振动模态及10 Hz~1 kHz频段内结构的动态响应进行测试,并对试验结果进行对比分析.研究结果表明:复合材料舵与钢质舵的模态振型基本相同,但复合材料舵所对应的固有频率高于钢质舵;同时,在白噪声激励载荷作用下,10 Hz~1 kHz频段内,复合材料舵整体加速度总级较钢质舵降低可达15 dB,且复合材料舵在局部壳板振动抑制方面明显优于钢质舵.本文研究将为复合材料舵的优化设计和工程应用提供参考和指导. 相似文献
20.
蜂窝式夹芯层结构横向耐撞性能数值仿真研究 总被引:5,自引:0,他引:5
蜂窝式夹层板结构具有强度高、结构轻等优越的性能,其中夹芯层结构起关键作用。文中采用非线性有限元软件MSC/Dytran模拟仿真了蜂窝式夹芯层结构在横向冲击载荷作用下的渐进屈曲过程,分析了结构的耐撞性能,结构参数对耐撞性能的影响。研究分析表明:蜂窝式夹芯层结构在横向冲击载荷作用下具有稳定的压溃载荷、较长的有效行程,具有优良的吸能特性。结构密度是影响结构耐撞性能的关键因素;夹芯层高度对结构的耐撞性影响不大,增加结构夹芯层高度结构吸能增加。 相似文献