Passenger rail in North America in the light of developments in Western Europe and Japan

Because of different geo‐demographic and economic conditions, the impact of the new passenger modes (road and air) on rail travel was much larger in North America than in Europe. In 1960s and 1970s, as the railway share of intercity traffic in North America shrunk to a negligible one or two percent, the passenger trains were abandoned by private railway companies and taken over by state organizations, which have continued to operate traditional trains and generate mounting losses. On the technology side, no attempts have been made to improve competitiveness of trains vis‐a‐vis automobiles and airplanes.

In Europe and Japan, the railways responded to the challenge by (i) upgrading the performance (speed) and comfort of traditional trains operating on existing tracks and (ii) developing trains which could, on short and intermediate range distances, compete successfully, in terms of speed and economy, with the road and air modes. The Japanese (Shinkansen trains) and French (TGV trains) experience clearly shows that trains operating on dedicated lines at average speeds of 150 to 200 km/hr provide a superior transportation service and economy on high‐traffic intercity routes of up to about 500 km length. In this paper the factors responsible for the present status of passenger rail in North America are analysed, the current policies in the U.S. and Canada are evaluated in the light of experience to date and developments abroad, and suggestions for a long‐term passenger rail policy are made. This includes examination of (i) the viability of continued subsidization of traditional train services, (ii) the viability of operation of faster trains on existing tracks, (iii) the scope for introduction of modern, fast trains on dedicated lines in high‐density, intercity corridors, (iv) the application of fast trains as access to major airports and integration of airports with fast intercity lines, and (v) the impact of energy (oil) consumption in transportation.

     

Scheduling heterogeneous train traffic on double tracks with efficient dispatching rules

To further improve the utilization rate of railway tracks and reduce train delays, this paper focuses on developing a high-efficiency train routing and timetabling approach for double-track railway corridors in condition that trains are allowable to travel on reverse direction tracks. We first design an improved switchable policy which is rooted in the approaches by Mu and Dessouky (2013), with the analysis of possible delays caused by different path choices. Then, three novel integrated train routing and timetabling approaches are proposed on the basis of a discrete event model and different dispatching rules, including no switchable policy (No-SP), Mu and Dessouky (2013)’s switchable policy (Original-SP) and improved switchable policy (Improved-SP). To demonstrate the performance of the proposed approaches, the heterogeneous trains on Beijing–Shanghai high speed railway are scheduled by aforementioned approaches. The case studies indicate that in comparison to No-SP and Original-SP approaches, respectively, the Improved-SP approach can reduce the total delay of trains up to 44.44% and 73.53% within a short computational time. Moreover, all of the performance criteria of the Improved-SP approach are usually better than those of other two approaches.     

Real-time traffic network state estimation and prediction with decision support capabilities: Application to integrated corridor management

This paper presents a real-time traffic network state estimation and prediction system with built-in decision support capabilities for traffic network management. The system provides traffic network managers with the capabilities to estimate the current network conditions, predict congestion dynamics, and generate efficient traffic management schemes for recurrent and non-recurrent congestion situations. The system adopts a closed-loop rolling horizon framework in which network state estimation and prediction modules are integrated with a traffic network manager module to generate efficient proactive traffic management schemes. The traffic network manger adopts a meta-heuristic search mechanism to construct the schemes by integrating a wide variety of control strategies. The system is applied in the context of Integrated Corridor Management (ICM), which is envisioned to provide a system approach for managing congested urban corridors. A simulation-based case study is presented for the US-75 corridor in Dallas, Texas. The results show the ability of the system to improve the overall network performance during hypothetical incident scenarios.     

A comparison of modelled and real-life driving profiles for the simulation of railway vehicle operation

A key factor in determining the performance of a railway system is the speed profile of the trains within the network. There can be significant variation in this speed profile for identical trains on identical routes, depending on how the train is driven. A better understanding and control of speed profiles can therefore offer significant potential for improvements in the performance of railway systems. This paper develops a model to allow the variability of real-life driving profiles of railway vehicles to be quantitatively described and predicted, in order to better account for the effects on the speed profile of the train and hence the performance of the railway network as a whole. The model is validated against data from the Tyne and Wear Metro, and replicates the measured data to a good degree of accuracy.     

Development and calibration of a long-distance passenger traffic assignment model

This paper studies the assignment of long-distance passenger traffic on a highway corridor network. First, we propose a traditional model for the long-distance traffic assignment considering interactions with local commuter traffic. It addresses the effect of local networks on highway corridors. An iterative algorithm is developed to solve for the exact solution. Then, to address the potential computational issues that arise therein, a decomposition method is proposed by introducing a new concept of corridor elasticity. An assignment procedure for long-distance passenger traffic is developed accordingly. Numerical tests show that the proposed decomposition method makes significant improvements in computational performance at a small loss of optimality. This decomposition method well approximates the exact assignment from the traditional formulation, especially when the highway corridors are near-saturation. The proposed decomposition method appears practical for application.     

Closing the loop in real-time railway control: Framework design and impacts on operations

Railway traffic is heavily affected by disturbances and/or disruptions, which are often cause of delays and low performance of train services. The impact and the propagation of such delays can be mitigated by relying on automatic tools for rescheduling traffic in real-time. These tools predict future track conflict based on current train information and provide suitable control measures (e.g. reordering, retiming and/or rerouting) by using advanced mathematical models. A growing literature is available on these tools, but their effects on real operations are blurry and not yet well known, due to the very scarce implementation of such systems in practice.In this paper we widen the knowledge on how automatic real-time rescheduling tools can influence train performance when interfaced with railway operations. To this purpose we build up a novel traffic control framework that couples the state-of-the art automatic rescheduling tool ROMA, with the realistic railway traffic simulation environment EGTRAIN, used as a surrogate of the real field. At regular times ROMA is fed with current traffic information measured from the field (i.e. EGTRAIN) in order to predict possible conflicts and compute (sub) optimal control measures that minimize the max consecutive delay on the network. We test the impact of the traffic control framework based on different types of interaction (i.e. open loop, multiple open loop, closed loop) between the rescheduling tool and the simulation environment as well as different combinations of parameter values (such as the rescheduling interval and prediction horizon). The influence of different traffic prediction models (assuming e.g. aggressive versus conservative driving behaviour) is also investigated together with the effects on traffic due to control delays of the dispatcher in implementing the control measures computed by the rescheduling tool.Results obtained for the Dutch railway corridor Utrecht–Den Bosch show that a closed loop interaction outperforms both the multiple open loop and the open loop approaches, especially with large control delays and limited information on train entrance delays and dwell times. A slow rescheduling frequency and a large prediction horizon improve the quality of the control measure. A limited control delay and a conservative prediction of train speed help filtering out uncertain traffic dynamics thereby increasing the effectiveness of the implemented measures.     

Macroscopic multiple-station short-turning model in case of complete railway blockages

In case of railway disruptions, traffic controllers are responsible for dealing with disrupted traffic and reduce the negative impact for the rest of the network. In case of a complete blockage when no train can use an entire track, a common practice is to short-turn trains. Trains approaching the blockage cannot proceed according to their original plans and have to short-turn at a station close to the disruption on both sides. This paper presents a Mixed Integer Linear Program that computes the optimal station and times for short-turning the affected train services during the three phases of a disruption. The proposed solution approach takes into account the interaction of the traffic between both sides of the blockage before and after the disruption. The model is applied to a busy corridor of the Dutch railway network. The computation time meets the real-time solution requirement. The case study gives insight into the importance of the disruption period in computing the optimal solution. It is concluded that different optimal short-turning solutions may exist depending on the start time of the disruption and the disruption length. For periodic timetables, the optimal short-turning choices repeat due to the periodicity of the timetable. In addition, it is observed that a minor extension of the disruption length may result in less delay propagation at the cost of more cancellations.     

Stability of transportation networks under adaptive routing policies

Growing concerns regarding urban congestion, and the recent explosion of mobile devices able to provide real-time information to traffic users have motivated increasing reliance on real-time route guidance for the online management of traffic networks. However, while the theory of traffic equilibria is very well-known, fewer results exist on the stability of such equilibria, especially in the context of adaptive routing policy. In this work, we consider the problem of characterizing the stability properties of traffic equilibria in the context of online adaptive route choice induced by GPS-based decision making. We first extend the recent framework of “Markovian Traffic Equilibria” (MTE), in which users update their route choice at each intersection of the road network based on traffic conditions, to the case of non-equilibrium conditions, while preserving consistency with known existence and uniqueness results on MTE. We then exhibit sufficient conditions on the network topology and the latency functions for those MTEs to be stable in the sense of Lyapunov for a single destination problem. For various more restricted classes of network topologies motivated by the observed properties of travel patterns in the Singapore network, under certain assumptions we prove local exponential stability of the MTE, and derive analytical results on the sensitivity of the characteristic time of convergence to network and traffic parameters. The results proposed in this work are illustrated and validated on synthetic toy problems as well as on the Singapore road network with real demand and traffic data.     

Connectivity-based optimization of vehicle route and speed for improved fuel economy

Traditionally, vehicle route planning problem focuses on route optimization based on traffic data and surrounding environment. This paper proposes a novel extended vehicle route planning problem, called vehicle macroscopic motion planning (VMMP) problem, to optimize vehicle route and speed simultaneously using both traffic data and vehicle characteristics to improve fuel economy for a given expected trip time. The required traffic data and neighbouring vehicle dynamic parameters can be collected through the vehicle connectivity (e.g. vehicle-to-vehicle, vehicle-to-infrastructure, vehicle-to-cloud, etc.) developed rapidly in recent years. A genetic algorithm based co-optimization method, along with an adaptive real-time optimization strategy, is proposed to solve the proposed VMMP problem. It is able to provide the fuel economic route and reference speed for drivers or automated vehicles to improve the vehicle fuel economy. A co-simulation model, combining a traffic model based on SUMO (Simulation of Urban MObility) with a Simulink powertrain model, is developed to validate the proposed VMMP method. Four simulation studies, based on a real traffic network, are conducted for validating the proposed VMMP: (1) ideal traffic environment without traffic light and jam for studying the fuel economy improvement, (2) traffic environment with traffic light for validating the proposed traffic light penalty model, (3) traffic environment with traffic light and jam for validating the proposed adaptive real-time optimization strategy, and (4) investigating the effect of different powertrain platforms to fuel economy using two different vehicle platforms. Simulation results show that the proposed VMMP method is able to improve vehicle fuel economy significantly. For instance, comparing with the fastest route, the fuel economy using the proposed VMMP method is improved by up to 15%.     

Ant colony optimization for the real-time train routing selection problem

This paper deals with the real-time problem of scheduling and routing trains in a railway network. In the related literature, this problem is usually solved starting from a subset of routing alternatives and computing the near-optimal solution of the simplified routing problem. We study how to select the best subset of routing alternatives for each train among all possible alternatives. The real-time train routing selection problem is formulated as an integer linear programming formulation and solved via an algorithm inspired by the ant colonies’ behavior. The real-time railway traffic management problem takes as input the best subset of routing alternatives and is solved as a mixed-integer linear program. The proposed methodology is tested on two practical case studies of the French railway infrastructure: the Lille terminal station area and the Rouen line. The computational experiments are based on several practical disturbed scenarios. Our methodology allows the improvement of the state of the art in terms of the minimization of train consecutive delays. The improvement is around 22% for the Rouen instances and around 56% for the Lille instances.     

Adaptive route choices in risky traffic networks: A prospect theory approach

This paper deals with route choice models capturing travelers’ strategic behavior when adapting to revealed traffic conditions en route in a stochastic network. The strategic adaptive behavior is conceptualized as a routing policy, defined as a decision rule that maps from all possible revealed traffic conditions to the choices of next link out of decision nodes, given information access assumptions. In this paper, we use a specialized example where a variable message sign provides information about congestion status on outgoing links. We view the problem as choice under risk and present a routing policy choice model based on the cumulative prospect theory (CPT), where utility functions are nonlinear in probabilities and thus flexible attitudes toward risk can be captured.In order to illustrate the differences between routing policy and non-adaptive path choice models as well as differences between models based on expected utility (EU) theory and CPT, we estimate models based on synthetic data and compare them in terms of prediction results. There are large differences in path share predictions and the results demonstrate the flexibility of the CPT model to represent varying degrees of risk aversion and risk seeking depending on the outcome probabilities.     

Real-time energy consumption minimization in railway networks

A new timetable must be calculated in real-time when train operations are perturbed. Although energy consumption is becoming a central issue both from the environmental and economic perspective, it is usually neglected in the timetable recalculation. In this paper, we formalize the real-time Energy Consumption Minimization Problem (rtECMP). It finds in real-time the driving regime combination for each train that minimizes energy consumption, respecting given routing and precedences between trains. In the possible driving regime combinations, train routes are split in subsections for which one of the regimes resulting from the Pontryagin’s Maximum Principle is to be chosen. We model the trade-off between minimizing energy consumption and total delay by considering as objective function their weighted sum. We propose an algorithm to solve the rtECMP, based on the solution of a mixed-integer linear programming model. We test this algorithm on the Pierrefitte-Gonesse control area, which is a critical area in France with dense mixed traffic. The results show that the problem is tractable and an optimal solution of the model tackled can often be found in real-time for most instances.     

Distributed optimization and coordination algorithms for dynamic speed optimization of connected and autonomous vehicles in urban street networks

Dynamic speed harmonization has shown great potential to smoothen the flow of traffic and reduce travel time in urban street networks. The existing methods, while providing great insights, are neither scalable nor real-time. This paper develops Distributed Optimization and Coordination Algorithms (DOCA) for dynamic speed optimization of connected and autonomous vehicles in urban street networks to address this gap. DOCA decomposes the nonlinear network-level speed optimization problem into several sub-network-level nonlinear problems thus, it significantly reduces the problem complexity and ensures scalability and real-time runtime constraints. DOCA creates effective coordination in decision making between each two sub-network-level nonlinear problems to push solutions towards optimality and guarantee attaining near-optimal solutions. DOCA is incorporated into a model predictive control approach to allow for additional consensus between sub-network-level problems and reduce the computational complexity further. We applied the proposed solution technique to a real-world network in downtown Springfield, Illinois and observed that it was scalable and real-time while finding solutions that were at most 2.7% different from the optimal solution of the problem. We found significant improvements in network operations and considerable reductions in speed variance as a result of dynamic speed harmonization.     

Real-time traffic estimation using data expansion

This paper presents a method for estimating missing real-time traffic volumes on a road network using both historical and real-time traffic data. The method was developed to address urban transportation networks where a non-negligible subset of the network links do not have real-time link volumes, and where that data is needed to populate other real-time traffic analytics. Computation is split between an offline calibration and a real-time estimation phase. The offline phase determines link-to-link splitting probabilities for traffic flow propagation that are subsequently used in real-time estimation. The real-time procedure uses current traffic data and is efficient enough to scale to full city-wide deployments. Simulation results on a medium-sized test network demonstrate the accuracy of the method and its robustness to missing data and variability in the data that is available. For traffic demands with a coefficient of variation as high as 40%, and a real-time feed in which as much as 60% of links lack data, we find the percentage root mean square error of link volume estimates ranges from 3.9% to 18.6%. We observe that the use of real-time data can reduce this error by as much as 20%.     

Dynamic traffic routing in a network with adaptive signal control

In real traffic networks, travellers’ route choice is affected by traffic control strategies. In this research, we capture the interaction between travellers’ route choice and traffic signal control in a coherent framework. For travellers’ route choice, a VANET (Vehicular Ad hoc NETwork) is considered, where travellers have access to the real-time traffic information through V2V/V2I (Vehicle to Vehicle/Vehicle to Infrastructure) infrastructures and make route choice decisions at each intersection using hyper-path trees. We test our algorithm and control strategy by simulation in OmNet++ (A network communication simulator) and SUMO (Simulation of Urban MObility) under several scenarios. The simulation results show that with the proposed dynamic routing, the overall travel cost significantly decreases. It is also shown that the proposed adaptive signal control reduces the average delay effectively, as well as reduces the fluctuation of the average speed within the whole network.     

Exploiting the fundamental diagram of urban networks for feedback-based gating

Traffic signal control for urban road networks has been an area of intensive research efforts for several decades, and various algorithms and tools have been developed and implemented to increase the network traffic flow efficiency. Despite the continuous advances in the field of traffic control under saturated conditions, novel and promising developments of simple concepts in this area remains a significant objective, because some proposed approaches that are based on various meta-heuristic optimization algorithms can hardly be used in a real-time environment. To address this problem, the recently developed notion of network fundamental diagram for urban networks is exploited to improve mobility in saturated traffic conditions via application of gating measures, based on an appropriate simple feedback control structure. As a case study, the proposed methodology is applied to the urban network of Chania, Greece, using microscopic simulation. The results show that the total delay in the network decreases significantly and the mean speed increases accordingly.     

Evaluation of traffic data obtained via GPS-enabled mobile phones: The Mobile Century field experiment

The growing need of the driving public for accurate traffic information has spurred the deployment of large scale dedicated monitoring infrastructure systems, which mainly consist in the use of inductive loop detectors and video cameras. On-board electronic devices have been proposed as an alternative traffic sensing infrastructure, as they usually provide a cost-effective way to collect traffic data, leveraging existing communication infrastructure such as the cellular phone network. A traffic monitoring system based on GPS-enabled smartphones exploits the extensive coverage provided by the cellular network, the high accuracy in position and velocity measurements provided by GPS devices, and the existing infrastructure of the communication network. This article presents a field experiment nicknamed Mobile Century, which was conceived as a proof of concept of such a system. Mobile Century included 100 vehicles carrying a GPS-enabled Nokia N95 phone driving loops on a 10-mile stretch of I-880 near Union City, California, for 8 h. Data were collected using virtual trip lines, which are geographical markers stored in the handset that probabilistically trigger position and speed updates when the handset crosses them. The proposed prototype system provided sufficient data for traffic monitoring purposes while managing the privacy of participants. The data obtained in the experiment were processed in real-time and successfully broadcast on the internet, demonstrating the feasibility of the proposed system for real-time traffic monitoring. Results suggest that a 2–3% penetration of cell phones in the driver population is enough to provide accurate measurements of the velocity of the traffic flow. Data presented in this article can be downloaded from http://traffic.berkeley.edu.     

Enhancing the performance of existing urban traffic light control through extremum-seeking

Urban traffic light controllers are responsible for maintaining good performance within the transport network. Most existing and proposed controllers have design parameters that require some degree of tuning, with the sensitivity of the performance measure to the parameter often high. To date, tuning has been largely treated as a manual calibration exercise but ignores the effects of changes in traffic condition, such as demand profile evolution due to urban population growth. To address this potential shortcoming, we seek to use a newly developed extremum-seeker to calibrate the parameters of existing urban traffic light controllers in real-time such that a certain performance measure is optimised. The results are demonstrated for three categories of traffic controllers on a microscopic urban traffic simulation. It is demonstrated that the extremum-seeking scheme is able to seek the optimal parameters, with respect to a certain performance measure, for each of these traffic light controllers in an urban, uni-modal traffic environment.     

Short‐term traffic flow prediction with linear conditional Gaussian Bayesian network

Traffic flow prediction is an essential part of intelligent transportation systems (ITS). Most of the previous traffic flow prediction work treated traffic flow as a time series process only, ignoring the spatial relationship from the upstream flows or the correlation with other traffic attributes like speed and density. In this paper, we utilize a linear conditional Gaussian (LCG) Bayesian network (BN) model to consider both spatial and temporal dimensions of traffic as well as speed information for short‐term traffic flow prediction. The LCG BN allows both continuous and discrete variables, which enables the consideration of categorical variables in traffic flow prediction. A microscopic traffic simulation dataset is used to test the performance of the proposed model compared to other popular approaches under different predicting time intervals. In addition, the authors investigate the importance of spatial data and speed data in flow prediction by comparing models with different levels of information. The results indicate that the prediction accuracy will increase significantly when both spatial data and speed data are included. Copyright © 2016 John Wiley & Sons, Ltd.     

Supporting real-time traffic in multihop vehicle-to-infrastructure networks

In this paper, a new Controlled Vehicular Internet Access protocol with QoS support (CVIA-QoS) is introduced. CVIA-QoS employs fixed gateways along the road which perform periodic admission control and scheduling decisions for the packet traffic in their service area. The CVIA-QoS protocol is based on Controlled Vehicular Internet Access (CVIA) protocol that was designed only for the best-effort traffic. The most important contribution of the CVIA-QoS protocol is providing delay bounded throughput guarantees for soft real-time traffic, which is an important challenge especially for a mobile multihop network. After the demands of the soft real-time traffic is met, CVIA-QoS supports the best-effort traffic with the remaining bandwidth. Simulation results confirm that in CVIA-QoS protocol, the real-time throughput is not affected from the best-effort load and its delay is much smaller than CVIA delay when both the real-time and best-effort load exist in the channel. It has been observed that, unlike, CVIA-QoS, IEEE 802.11e with multi-hopping suffers from lower throughput and high number of real-time packet drops.