共查询到20条相似文献,搜索用时 505 毫秒
1.
2.
3.
SL4装船机是唐山港"京唐港购置翻车机系统设备项目扩容改造工程"的配套设备。在设备安装方案制定时,考虑到国内外装船机、卸船机等大型起重机械的安装一般采用整机滚装上岸的方式,但由于码头岸线已有3条装船线,如采用滚装上岸的方式,需拆除已有3条皮带机各50延米,影响已有3条装船线生产运营2周时间,这对公司生产运营影响较大。经研究采用了整机吊装上岸的方案。吊装方案的成功实施,几乎未对原工程的生产运行造成影响。该方案可为其他码头改造工程提供参考与借鉴。 相似文献
4.
采用桥式抓斗卸船机"半吊装半滚装"整机上岸工艺,解决了桥式抓斗卸船机上岸安装与码头装卸作业之间的矛盾,最大程度地缩短了码头占用时间,减少了卸船码头带式输送机系统设备的改造成本和施工时间。 相似文献
5.
大型门座起重机整机运输及滚装上岸过程存在很大的风险,本文以滨海港北区10万t级通用码头一期工程为例,探讨了大型门座起重机整机运输及滚装上岸的安全管理。 相似文献
6.
7.
8.
9.
在不能采用滚装牵引上岸的情况下,通过制定科学的工艺方案和严格施工,实现了两台链斗卸船机的整机吊装上岸就位,做到了保证施工进度和基本不影响港口正常生产. 相似文献
10.
针对南京龙潭港集装箱码头受当地航道等因素影响而无法实现岸边集装箱起重机整机总装完成运输至码头后滚装上岸的问题,将其四大件改为码头现场总装。设计了四大件吊装方案,校核了门框整体吊耳的设计强度,优化了发运方案和现场总装方案,确保了该方案的安全性和可实施性。 相似文献
11.
为提高洋山深水港区一期工作船码头生产效益,开展了对该码头增加滚装接卸功能的研究。介绍该码头的现状。从泊位长度、码头前沿水深、作业平台高程、航道、锚地等方面研究。对码头、引桥、靠船簇桩结构受力,系船柱、护舷配套设施等方面分析。得出结论该码头结构满足50000t级滚装船靠泊和装卸作业的要求。 相似文献
12.
13.
14.
15.
Tiago A. Santos 《Maritime Policy and Management》2017,44(7):859-881
A novel methodology is developed for determining the characteristics of a cargo roll-on/roll-off (ro-ro) ship and the fleet size required for a given short sea shipping route. The ship and required fleet size to satisfy the transportation demand (for each pair of speed and freight rate) are determined using a database of existing cargo ro-ro ships to obtain the main technical characteristics of the most suitable ship. The time charter, voyage costs and revenue are then calculated considering the technical characteristics of each ship. Fuel costs are corrected for the actual ship speed and loading condition. A number of restrictions in the transportation problem are considered leading to the exclusion of unfeasible solutions. The maximum profit over the period of a year is identified among the feasible pairs of speed and freight rate. This general methodology is applied in a case study that considers the route between Leixões (Portugal) and Rotterdam (Netherlands). The study allows the identification of the most suitable ship and fleet sizes for different market penetration levels and quantifies the impact on shipping company profit of changes in parameters such as fuel costs, time charter costs, emission control area, installed propulsion power and stacking factor. 相似文献
16.
本文简要介绍了川江及三峡库区标准型载货汽车滚装船研究背景、总纵强度计算工况和主尺度比L/D和B/D的确定,并分析了双层底和总布置对总纵强度的影响,最后用标准型净尺寸临界船进行验证. 相似文献
17.
针对某些国家和地区的航道水深等建港条件受限、大宗散货进口或出运而建设大型码头成本巨大的问题,探讨通过水上过驳系统中转,减少港口建设及营运成本的可行性。结合孟加拉电厂配套煤炭码头的设计过程,探讨如何确定水上过驳装卸工艺系统。采用理论计算和模拟仿真的方式,选择不同的船型组合,合理选择运输船型,并根据乘潮情况确定航道参数。结果表明,采用水上过驳中转系统,可避免大型码头建设及长距离航道的疏浚维护费用,水上过驳成本相对于货物价值影响不大,可作为码头建设一个可行的选择方案。 相似文献
18.
19.
分析火力发电厂输煤系统桥式抓斗卸船机存在的振动给料器出力不足、料斗门不易调节、料斗衬板易磨损、大车行走防风能力不足等常见缺陷,提出改进措施,以提高桥式抓斗卸船机的安全可靠性和工作效率。 相似文献
20.
介绍印尼西苏电厂煤炭进口码头装卸工艺和输送系统的设计,分析悬链斗卸船机在印尼电厂煤炭进口码头工程中的应用. 相似文献