Development of a corrected average speed model for calculating carbon dioxide emissions per link unit on urban roads

The purpose of our study is to develop a “corrected average emission model,” i.e., an improved average speed model that accurately calculates CO₂ emissions on the road. When emissions from the central roads of a city are calculated, the existing average speed model only reflects the driving behavior of a vehicle that accelerates and decelerates due to signals and traffic. Therefore, we verified the accuracy of the average speed model, analyzed the causes of errors based on the instantaneous model utilizing second-by-second data from driving in a city center, and then developed a corrected model that can improve the accuracy. We collected GPS data from probe vehicles, and calculated and analyzed the average emissions and instantaneous emissions per link unit. Our results showed that the average speed model underestimated CO₂ emissions with an increase in acceleration and idle time for a speed range of 20 km/h and below, which is the speed range for traffic congestion. Based on these results, we analyzed the relationship between average emissions and instantaneous emissions according to the average speed per link unit, and we developed a model that performed better with an improved accuracy of calculated CO₂ emissions for 20 km/h and below.     

Spin glass and the interactions of congestion and emissions: An exploratory step

This paper models traffic congestion formation on highways and roads by recognizing the centrality of dynamical systems and using concepts from complexity theory as imbedded in the spin glasses analogue. Further, it explores the concept of how an increase in air pollution caused by vehicle exhaust emission can be traced to traffic congestion, specifically to the acceleration/deceleration of vehicles on the roads. First, spin glass is introduced and then by applying the two-dimensional x − y Ising model and defining a Hamiltonian (based on Edwards-Anderson and Mattis models of spin glass systems) for a system of vehicles on the road, derivations are made of the specific friction of congestion and the bulk modulus of congestion using the Gibbs-Boltzmann statistic. Similarly using the interactions of vehicles with each other and the resulting accelerations and decelerations of vehicles as the basis for exhaust emissions, derivations are made of a specificity of exhaust emissions. These are analogues to the entropy models of thermodynamics. This series of derivations serves as an analytical model for detecting incidents of congestion and increase in air pollution due to exhaust emissions in transportation systems.     

Impacts of freeway accidents on CO2 emissions: A case study for Orange County,California, US

Traffic congestion caused by traffic accidents contributes to CO₂ emissions. Generally, more efficient and prompt responses to accidents lead to reduced traffic congestion as well as CO₂ emissions. Here we assess the CO₂ emissions impacts of freeway accidents, applies an existing model to capture spatio-temporally congested regions caused by freeway accidents. A case study for the assessment of CO₂ emissions impacts of based on the results from the model is presented.     

VISSIM/MOVES integration to investigate the effect of major key parameters on CO2 emissions

This paper looks at CO₂ emissions on limited access highways in a microscopic and stochastic environment using an optimal design approach. Estimating vehicle emissions based on second-by-second vehicle operation allows the integration of a microscopic traffic simulation model with the latest US Environmental Protection Agency’s mobile source emissions model to improve accuracy. A factorial experiment on a test bed prototype of the I-4 urban limited access highway corridor located in Orlando, Florida was conducted to identify the optimal settings for CO₂ emissions reduction and to develop a microscopic transportation emission prediction model. An exponentially decaying function towards a limiting value expressed in the freeway capacity is found to correlate with CO₂ emission rates. Moreover, speeds between 55 and 60 mph show emission rate reduction effect while maintaining up to 90% of the freeway’s capacity. The results show that speed has a significant impact on CO₂ emissions when detailed and microscopic analysis of vehicle operations of acceleration and deceleration are considered.     

Minimizing CO2e emissions by setting a road toll

The main purpose of this paper is to develop a bi-level pricing model to minimize the CO₂e emissions and the total travel time in a small road network. In the lower level of the model, it is assumed that users of the road network find a dynamic user equilibrium which minimizes the total costs of those in the system. For the higher level of the model, different road toll strategies are applied in order to minimize the CO₂e emissions. The model has been applied to an illustrative example. It shows the effects on traffic flows, revenues, total time and CO₂e emissions for different numbers of servers collecting tolls and different pricing strategies over a morning peak traffic period. The results show that the CO₂e emissions produced can be significantly affected by the number of servers and the type of toll strategy employed. The model is also used to find the best toll strategy when there is a constraint on the revenue that is required to be raised from the toll and how this affects the emissions produced. Further runs compare strategies to minimize the CO₂e emissions with those that minimize total travel time in the road system. In the illustrative example, the results for minimizing CO₂e emissions are shown to be similar to the results obtained from minimizing the total travel time.     

Should subsidies to urban passenger transport be increased? A spatial CGE analysis for a German metropolitan area

In many countries passenger transport is significantly subsidized in a variety of ways for various reasons. The objective of this paper is to examine efficiency, distributional, environmental (CO₂ emissions) and spatial effects of increasing different kinds of passenger transport subsidies discriminating between household types, travel purposes and travel modes. The effects are calculated by applying a numerical spatial general equilibrium approach calibrated to an average German metropolitan area. In extension to most studies focusing on only one kind of subsidy, we compare the effects of different transport subsidies within the same unified framework that allows to account for two features not yet considered simultaneously in studies on transport subsidies: endogenous labor supply and location decisions. Furthermore, congestion, travel mode choice, travel related CO₂ emissions and institutional details regarding the tax system in Germany are taken into account. The results suggest that optimal subsidy levels are either small or even zero. While subsidizing public transport is welfare enhancing, subsidies to urban road traffic reduce aggregate urban welfare. Concerning the latter it is shown that making investments in urban road infrastructure capacity or reducing gasoline taxes may even be harmful to residents using predominantly automobile. In contrast, pure commuting subsidies hardly affect aggregate urban welfare, but distributional effects are substantial. All policies cause suburbanization of city residents and (except for subsidizing public transport) contribute to urban sprawl by raising the spatial imbalance of residences and jobs but the effect is relatively small. In addition, the policies induce a very differentiated pattern regarding distributional effects, benefits of landowners and environmental effects.     

Feedback control speed harmonization algorithm: Methodology and preliminary testing

The capacity drop phenomenon, which reduces the maximum bottleneck discharge rate following the onset of congestion, is a critical restriction in transportation networks that produces additional traffic congestion. Consequently, preventing or reducing the occurrence of the capacity drop not only mitigates traffic congestion, but can also produce environmental and traffic safety benefits. In addressing this problem, the paper develops a novel bang-bang feedback control speed harmonization (SH) or Variable Speed Limit (VSL) algorithm, that attempts to prevent or delay the breakdown of a bottleneck and thus reduce traffic congestion. The novelty of the system lies in the fact that it is both proactive and reactive in responding to the dynamic stochastic nature of traffic. The system is proactive because it uses a calibrated fundamental diagram to initially identify the optimum throughput to maintain within the SH zone. Furthermore, the system is reactive (dynamic) because it monitors the traffic stream directly upstream of the bottleneck to adjustment the metering rate to capture the dynamic and stochastic nature of traffic. The steady-state traffic states in the vicinity of a lane-drop bottleneck before and after applying the SH algorithm is analyzed to demonstrate the effectiveness of the algorithm in alleviating the capacity drop. We demonstrate theoretically that the SH algorithm is effective in enhancing the bottleneck discharge rate. A microscopic simulation of the network using the INTEGRATION software further demonstrates the benefits of the algorithm in increasing the bottleneck discharge rate, decreasing vehicle delay, and reducing vehicle fuel consumption and CO₂ emission levels. Specifically, compared with the base case without the SH algorithm, the advisory speed limit increases the bottleneck discharge rate by approximately 7%, reduces the overall system delay by approximately 20%, and reduces the system-wide fuel consumption and CO₂ emission levels by 5%.     

Impact of horizontal geometric design of two-lane rural roads on vehicle co2 emissions

In 2014, highway vehicles accounted for 72.8% of all Greenhouse Gases emissions from transportation in Europe. In the United States (US), emissions follow a similar trend. Although many initiatives try to mitigate emissions by focusing on traffic operations, little is known about the relationship between emissions and road design. It is feasible that some designs may increase average flow speed and reduce accelerations, consequently minimizing emissions.This study aims to evaluate the impact of road horizontal alignment on CO₂ emissions produced by passenger cars using a new methodology based on naturalistic data collection. Individual continuous speed profiles were collected from actual drivers along eleven two-lane rural road sections that were divided into 29 homogeneous road segments. The CO₂ emission rate for each homogeneous road segment was estimated as the average of CO₂ emission rates of all vehicles driving, estimated by applying the VT-Micro model.The analysis concluded that CO₂ emission rates increase with the Curvature Change Rate. Smooth road segments normally allowed drivers to reach higher speeds and maintain them with fewer accelerations. Additionally, smother segments required less time to cover the same distance, so emissions per length were lower. It was also observed that low mean speeds produce high CO₂ emission rates and they increase even more on roads with high speed dispersions.Based on this data, several regression models were calibrated for different vehicle types to estimate CO₂ emissions on a specific road segment. These results could be used to incorporate sustainability principles to highway geometric design.     

Improving fuel consumption and CO2 emissions calculations in urban areas by coupling a dynamic micro traffic model with an instantaneous emissions model

Τhis study demonstrates the combination of a microscopic traffic simulator (AIMSUN) with an instantaneous emissions model (AVL CRUISE) to investigate the impact of traffic congestion on fuel consumption on an urban arterial road. The micro traffic model was enhanced by an improved car-following law according to Morello et al. (2014) and was calibrated to replicate measured driving patterns over an urban corridor in Turin, Italy, operating under adaptive urban traffic control (UTC). The method was implemented to study the impact of congestion on fuel consumption for the category of Euro 5 diesel <1.4 l passenger cars. Free flow and congested conditions led to respective consumption differences of −25.8% and 20.9% over normal traffic. COPERT 5 rather well predicted the impact of congestion but resulted to a much lower relative reduction in free flow conditions. Start and stop system was estimated to reduce consumption by 6% and 11.9% under normal and congested conditions, respectively. Using the same modelling approach, UTC was found to have a positive impact on CO₂ emissions of 8.1% and 4.5% for normal and congested conditions, respectively, considering the Turin vehicle fleet mix for the year 2013. Overall, the study demonstrates that the combination of detailed and validated micro traffic and emissions models offers a powerful combination to study traffic and powertrain impacts on greenhouse gas and fuel consumption of on road vehicles over a city network.     

Quantifying errors in micro-scale emissions models using a case-study approach

To quantify the level of uncertainty attached to forecasts of CO₂ emissions, an analysis of errors is undertaken; looking at both errors inherent in the model structure and the uncertainties in the input data. Both error types are treated in relation to CO₂ emissions modelling using a case-study from Brisbane, Australia. To estimate input data uncertainty, an analysis of traffic conditions using Monte Carlo simulation is used. Model structure induced uncertainties are also quantified by statistical analysis for a number of traffic scenarios. To arrive at an optimal overall CO₂ prediction, the interaction between the two components is taken into account. Since a more complex model does not necessarily yield higher overall accuracy, a compromise solution is found. The results suggest that the CO₂ model used in the analysis produces low overall uncertainty under free flow traffic conditions. When average traffic speeds approach congested conditions, however, there are significant errors associated with emissions estimates.     

The treatment of traffic in the Dutch environmental outlooks: the role of science in policy making and policy evaluation

The Dutch National Institute of Public Health and Environmental Protection publishes Environmental Outlooks in which 25‐year projections are made. These Outlooks quantifying the environmental problems, form the scientific basis for Dutch environmental policy. Traffic and transport is one of the main sectors causing environmental problems. The emissions and energy use of all relevant categories (road traffic, non‐road traffic) are based on model simulations with models. This paper describes the main models used.

If present policy is implemented only a minority of the environmental targets will be met.

If a sustainable transport system for the Netherlands means a large reducton in CO₂ emissions and energy use after 2010 a stronger emphasis on both technical and non‐technical measures (such as land‐use planning combined with public transport improvements) for the period until 2010 is needed than proposed in the Second Transport Structure Plan, unless a sustainable energy source becomes available.     

Metropolitan sprawl measurement and its impacts on commuting trips and road emissions

This study measures urban form as indicators of metropolitan sprawl and explores its impact on commuting trips and NO_x and CO₂ emissions from road traffic in all metropolitan statistical areas (MSAs) and four groups’ MSAs separated by population in the continental United States. Encompassing all MSAs, the study adds the accessibility factor to four existing factors: density, land use mix, centeredness, and street connectivity. The study establishes multivariate regression models between urban form, commuting trips, and emissions from road traffic while controlling for socioeconomic conditions. The study shows that urban form index and five urban form factors have a statistically significant association with commuting trips, NO_x and CO₂ emissions from road traffic. In four MSA groups as determined by MSA population size, higher values of urban form factors (i.e., lower sprawl) are statistically associated with more walking commuters. On the other hand, higher values of urban form factors are associated with fewer commuting vehicles per household in large MSAs with the moderate effect, a lower average commuting drive time in medium and small MSAs, and more commuters using public transportation in medium and large MSAs. This study provides an urban form index covering all metropolitan areas in the continental United States by adding another urban form factor, and the findings show that urban form factors have different effects on mode choices, drive time, and emission from road traffic depending on the MSA population size.     

Assessing carbon emissions from road transport through traffic flow estimators

Carbon emissions from road transport are one of the main issues related to modern transport planning. To address them adequately, the acquisition of reliable data about traffic flow is an essential prerequisite. However, the large quantity and the heterogeneity of available information often cause problems; missing or incomplete data are one of the most critical aspects. This paper discusses how technology handles imperfect information in order to obtain more accurate quantification of CO₂ emissions. First, an analysis of single estimators and combination models is provided, highlighting their main characteristics. Then, the TANINO model (Tool for the Analysis of Non-conservative Carbon Emissions In TraNspOrt) is presented, jointly developed at the University of Seville and at the IUAV University of Venice. It consists of two different modules: the first is a combination model that optimizes the results of three traffic flow single estimators, while the second is a macro-model of carbon evaluation, which takes into account road infrastructure, vehicle type and traffic conditions. TANINO is then tested to calculate CO₂ emissions along the ring road of the Spanish city of Seville, showing its more efficient performance, compared to the single estimators normally adopted for such aims. Transport planning can benefit from the adequate knowledge of traffic flows and related CO₂ emissions, since it allows a more reliable monitoring of the progresses granted by specific carbon policies.     

Including congestion effects in urban road traffic CO2 emissions modelling: Do Local Government Authorities have the right options?

Tailpipe emissions from vehicles on urban road networks have damaging impacts, with the problem exacerbated by the common occurrence of congestion. This article focuses on carbon dioxide because it is the largest constituent of road traffic greenhouse gas emissions. Local Government Authorities (LGAs) are typically responsible for facilitating mitigation of these emissions, and critical to this task is the ability to assess the impact of transport interventions on road traffic emissions for a whole network.This article presents a contemporary review of literature concerning road traffic data and its use by LGAs in emissions models (EMs). Emphasis on the practicalities of using data readily available to LGAs to estimate network level emissions and inform effective policy is a relatively new research area, and this article summarises achievements so far. Results of the literature review indicate that readily available data are aggregated at traffic level rather than disaggregated at individual vehicle level. Hence, a hypothesis is put forward that optimal EM complexity is one using traffic variables as inputs, allowing LGAs to capture the influence of congestion whilst avoiding the complexity of detailed EMs that estimate emissions at vehicle level.Existing methodologies for estimating network emissions based on traffic variables typically have limitations. Conclusions are that LGAs do not necessarily have the right options, and that more research in this domain is required, both to quantify accuracy and to further develop EMs that explicitly include congestion, whilst remaining within LGA resource constraints.     

Carbon dioxide emissions from port container distribution: Spatial characteristics and driving factors

Port carbon dioxide (CO₂) emissions in China have become an ever-increasing public concern due to their significant impacts on human health and the environment. However, existing studies focus mainly on CO₂ emissions from vessels calling at the ports and cargo handling within the ports, paying little attention to the inland distribution networks. To fill this gap, this paper proposes an easily implemented method for calculating CO₂ emissions from port container distribution (PCD) and investigates their spatial characteristics and driving factors. By analyzing 30 container ports in China, the main findings are as follows. First, road transportation is the major contributor of CO₂ emissions from PCD due to the lack of rail and inland water transportation. Second, PCD carbon emissions exhibit significant local spatial clustering. That is, ports with similar geographical locations tend to present a similar pattern of PCD carbon emissions. Third, as suggested by the spatial Durbin model, PCD carbon emissions are negatively determined by local gross domestic product, number of port berths, but are positively determined by local tertiary industry value and highway freight volume, and waterway freight volume in both local and neighboring ports. These results provide empirical insights into cross-port collaboration in reducing PCD carbon emissions.     

Modal analysis of real-time,real world vehicular exhaust emissions under heterogeneous traffic conditions

This study presents the characteristics of real world, real time, on-road vehicular exhaust emission namely, carbon monoxide (CO), nitric oxide (NO), hydrocarbons (HC), and carbon dioxide (CO₂) emitted under heterogeneous traffic conditions. Field experiments were performed on major category of vehicles in developing countries, i.e. two-wheelers, auto-rickshaws, cars and buses. The on-board monitoring was carried out on different corridors with varying road geometry. Results revealed that the driving cycle was dependent on the road geometry, with two lane mixed flow corridor having lot of short term events compared to that of arterial road. Vehicular emissions during idling and cruising were generally low compared to emissions during acceleration. It was also found that emissions were significantly dependent on short term events such as rapid acceleration and braking during a trip. Also, the standard emission models like COPERT and CMEM under predicted the real world emissions by 30–200% depending upon different driving modes. The on-road emissions measurements were able to capture the emission characteristics during the micro events of real world driving scenarios which were not represented by standard vehicle emission measured at laboratory conditions.     

Energy and emissions impacts of a freeway-based dynamic eco-driving system

Surface transportation consumes a vast quantity of fuel and accounts for about a third of the US CO₂ emissions. In addition to the use of more fuel-efficient vehicles and carbon-neutral alternative fuels, fuel consumption and CO₂ emissions can be lowered through a variety of strategies that reduce congestion, smooth traffic flow, and reduce excessive vehicle speeds. Eco-driving is one such strategy. It typically consists of changing a person’s driving behavior by providing general static advice to the driver (e.g. do not accelerate too quickly, reduce speeds, etc.). In this study, we investigate the concept of dynamic eco-driving, where advice is given in real-time to drivers changing traffic conditions in the vehicle’s vicinity. This dynamic strategy takes advantage of real-time traffic sensing and telematics, allowing for a traffic management system to monitor traffic speed, density, and flow, and then communicates advice in real-time back to the vehicles. By providing dynamic advice to drivers, approximately 10–20% in fuel savings and lower CO₂ emissions are possible without a significant increase in travel time. Based on simulations, it was found that in general, higher percentage reductions in fuel consumption and CO₂ emission occur during severe compared to less congested scenarios. Real-world experiments have also been carried out, showing similar reductions but to a slightly smaller degree.     

Analyzing spatiotemporal traffic line source emissions based on massive didi online car-hailing service data

Nowadays, the massive car-hailing data has become a popular source for analyzing traffic operation and road congestion status, which unfortunately has seldom been extended to capture detailed on-road traffic emissions. This study aims to investigate the relationship between road traffic emissions and the related built environment factors, as well as land uses. The Computer Program to Calculate Emissions from Road Transport (COPERT) model from European Environment Agency (EEA) was introduced to estimate the 24-h NOx emission pattern of road segments with the parameters extracted from Didi massive trajectory data. Then, the temporal Fuzzy C-Means (FCM) Clustering was used to classify road segments based on the 24-h emission rates, while Geographical Detector and MORAN’s I were introduced to verify the impact of built environment on line source emissions and the similarity of emissions generated from the nearby road segments. As a result, the spatial autoregressive moving average (SARMA) regression model was incorporated to assess the impact of selected built environment factors on the road segment emission rate based on the probabilistic results from FCM. It was found that short road length, being close to city center, high density of bus stations, more ramps nearby and high proportion of residential or commercial land would substantially increase the emission rate. Finally, the 24-h atmospheric NO₂ concentrations were obtained from the environmental monitor stations, to calculate the time variational trend by comparing with the line source traffic emissions, which to some extent explains the contribution of on-road traffic to the overall atmospheric pollution. Result of this study could guide urban planning, so as to avoid transportation related built environment attributes which may contribute to serious atmospheric environment pollutions.     

Spatiotemporal intersection control in a connected and automated vehicle environment

Current research on traffic control has focused on the optimization of either traffic signals or vehicle trajectories. With the rapid development of connected and automated vehicle (CAV) technologies, vehicles equipped with dedicated short-range communications (DSRC) can communicate not only with other CAVs but also with infrastructure. Joint control of vehicle trajectories and traffic signals becomes feasible and may achieve greater benefits regarding system efficiency and environmental sustainability. Traffic control framework is expected to be extended from one dimension (either spatial or temporal) to two dimensions (spatiotemporal). This paper investigates a joint control framework for isolated intersections. The control framework is modeled as a two-stage optimization problem with signal optimization at the first stage and vehicle trajectory control at the second stage. The signal optimization is modeled as a dynamic programming (DP) problem with the objective to minimize vehicle delay. Optimal control theory is applied to the vehicle trajectory control problem with the objective to minimize fuel consumption and emissions. A simplified objective function is adopted to get analytical solutions to the optimal control problem so that the two-stage model is solved efficiently. Simulation results show that the proposed joint control framework is able to reduce both vehicle delay and emissions under a variety of demand levels compared to fixed-time and adaptive signal control when vehicle trajectories are not optimized. The reduced vehicle delay and CO₂ emissions can be as much as 24.0% and 13.8%, respectively for a simple two-phase intersection. Sensitivity analysis suggests that maximum acceleration and deceleration rates have a significant impact on the performance regarding both vehicle delay and emission reduction. Further extension to a full eight-phase intersection shows a similar pattern of delay and emission reduction by the joint control framework.     

Urban real-world driving traffic emissions during interruption and congestion

On-road emissions from urban traffic during interrupted and congested flow conditions are too high as compared to free-flow condition and often influenced by accelerating and decelerating speed due to frequent stop-and-go. In this study, we measured emissions from passenger cars and auto-rickshaws during peak and off-peak hours and analyzed according to different mileages with the instantaneous speed and acceleration for interrupted and congested traffic conditions. It was found that during flow, several short-events lasting over fractions of a second each lead to a sharp increase in pollutant emissions, indicating episodic conditions. The emission levels are sensitive to frequency and intensity of acceleration and deceleration, in accordance with the traffic-flow patterns and speed, besides mileages. Further, congestion conditions occur during both peak and off-peak hours, but last for different durations. The results are important in the sense that instantaneous estimates of pollutant emissions are necessary for the assessment of air quality in urban centers and for an effective traffic management plan.